RCI Subaru Outback Engine Skid Plate | 2020-2025

Related products

• 

  • 
  • 
  • 

  4Runner 4th Gen (2003-2009)

  RCI Rock Sliders | 03-09 4Runner + GX 470

  • Fits 2003-2009 4runners without Xreas, unless you’ve removed those lines. Also fits 03-09 GX470, however it will require removing the factory steps / trim below the body pinch seam
  • Protects rocker panels and doors
  • Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
  • 1.75″ DOM outer rails are now standard for uncompromised strength
  • Heavy duty 1/4″ gussets on all legs
  • 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
  • Full length 1/4″ frame plate and three leg design guarantee a slider as strong or stronger than anything on the market
  • Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
  • 5° upward angle creates a low profile with maximum ground clearance, while remaining usable as a step
  • Direct bolt on addition to existing mounting locations, no drilling required
  • Easy install with only basic hand tools
  • Grade 8 hardware and installation instructions provided
  • Standard with our signature low profile rear kickout
  • *Does not fit KDSS models of GX470, unless you remove KDSS system from frame
  • Made to order from your selections below
  • Made in USA

  Rated 5.00 out of 5

  (5 reviews)

  $779.99 Select options
• 

  • 
  • 
  • 

  Rear Bumpers

  Dobinsons 60 Series Rear Bumper with Tire + Jerry Can Carrier FJ60 FJ62 Series 9/1985+

  • Late-1985 and onwards models only due to rear cross member difference.  Using it on an earlier model will require customization on customer’s end
  • The earlier model frames are not as wide as the later model, so you’ll have to make fill-in pieces for proper fitment
  • Comes standard as Black Powder Coat
  • Stainless Steel Latch and Hardware
  • Complete Kit with Everything Included.  Now includes twin jerry can holder
  • All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
  • Works with Factory Tow Hitch in OE position
  • Adjustable offset tire carrier head, suitable up to a 35″ tire
  • Installation Page
  • Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected.  We will be in touch with that delivery address

  Rated 5.00 out of 5

  (2 reviews)

  $2,860.00 Select options
• 

  • 
  • 
  • 

  Tundra 2nd Gen (2007-2021)

  RCI Full Skid Plate Set | 07-21 Tundra & 08-22 Sequoia

  • Suits 2nd Gen Tundra (2007-2021) and Sequoia (2008-2022)
  • Includes front, transmission/transfer-case skid plates
  • Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
  • Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
  • Excellent replacement of weak, lightweight OEM skid plates
  • Simple installation and removal of all subsections for maintenance
  • Easy access to oil filter by removal of access door using only two bolts
  • Reinforced edges between cross-members for maximum strength and rigidity
  • Bolt protector rings surround exposed bolts, shielding against physical damage
  • Smooth, flat surface that easily slides over obstacles
  • Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
  • Installs in minutes
  • Grade 8 hardware and installation instructions provided
  • Direct bolt on addition to existing factory attachment points, no drilling required
  • Made to order
  • Made in the USA

  Rated 5.00 out of 5

  (9 reviews)

  $512.98 Select options
• 

  • 
  • 
  • 

  4Runner 5th Gen (2010-2024)

  RCI Rock Sliders | 5th Gen 4Runner 2010-2024

  • Protects rocker panels and doors
  • Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
  • 1.75″ DOM outer rails are now standard for uncompromised strength
  • Heavy duty 1/4″ gussets on all legs
  • 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
  • Full length 1/4″ frame plate provides up to 15 mounting points on each side of the vehicle, guaranteeing a slider as strong or stronger than anything else on the market
  • Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
  • Standard with 20 degree upward angle, creates a low profile with maximum ground clearance
  • Direct bolt on addition to existing mounting locations, no drilling required
  • Easy install with only basic hand tools
  • Grade 8 hardware and installation instructions provided
  • Standard with our signature low profile rear kickout
  • Made to order from your selections below
  • Made in USA

  Rated 5.00 out of 5

  (3 reviews)

  $799.99 Select options