Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
RCV Ultimate IFS CV Axle Set | Ford Bronco Sasquatch with M210 diff
- Suits Ford Bronco Base W/Sasquatch, Big Bend W/Sasquatch, Black Diamond W/Sasquatch, Outer Banks W/Sasquatch, Badlands and Badlands W/Sasquatch, and Wildtrak and Wildtrak W/Sasquatch
- Only fits models equipped with the Sasquatch package M210 differential with the selectable front locker
- Standard length for use on lifted and non-lifted applications
- RCV Ultimate IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of the Ford Bronco IFS axle shafts
- Ultimate IFS CV Axles provide increased strength that original equipment axle shafts just can’t match
- Even if you have big tires and big power there are no worries
- Ultimate IFS CV Axles are low maintenance, and are backed with a “No Questions Asked” limited lifetime warranty against breakage up to 40″ tires!!
- Warranty Form
- Our IFS CV axles meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness and control of your IFS
- The axles feature a double-offset inboard CV joint that is comprised by 1-inch balls and 300M internal components
- The outboard CVs utilize our Dana 60 architecture with combination of 4340 & 300M components optimized for maximum strength
- The center bar is 300M, the strongest in the industry
- The RCV developed moly SPEC grease is used in the CVs to control heat build-up in even the most extreme use environments
- Black oxide coating is standard
- Sold as a pair
- Made in the USA
- If you have a base model non-Sasquatch with the M190 diff, you need These Axles instead
$2,299.95
In Stock
SKU: CVJIFS-BRONCO-S
Categories: Bronco (2021-2024+), Differential | Drivetrain, Exceptions, Performance Upgrades - Bronco 2021+, RCV Axles
Brand: RCV Performance Products
Description
Ford Bronco Sasquatch RCV Front Axles, RCV Ultimate IFS CV Axles for Ford Bronco Sasquatch with M210 locking differential (2021+) are designed to overcome the limitations of the OEM axles regarding strength and durability even at max angles. Designed to fit the Bronco M210 29 spline differential. Forged from the same race-proven materials as the Ford Performance Bronco R, the RCV Bronco axles will deliver the ultimate in performance. RCV IFS CV Axles for the Bronco are low maintenance, and are backed with a limited LIFETIME WARRANTY up to 40″ tires. Warranty Form. Our IFS CV axles meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness and control of your IFS.
The RCV axle set feature double-offset inboard CV joints for a friction-free plunge, and fixed outboard CVs for maximum angle. All CV internal components and axle shaft are made from 300M, the strongest material in the industry optimized for strength and durability.
We have tested these axles in a variety of applications and different environments with great success. This axle set is designed to be a direct factory replacement. Long travel suspension options available.
Axles are designed to fit the following models but not limited to: Ford Bronco Base W/Sasquatch, Big Bend W/Sasquatch, Black Diamond W/Sasquatch, Outer Banks W/Sasquatch, Badlands and Badlands W/Sasquatch, and Wildtrak and Wildtrak W/Sasquatch. Only fits models equipped with the Sasquatch package M210 differential with the selectable front locker.
ABOUT RCV PERFORMANCE
History
RCV Performance Products is a division of Aircraft Gear Corp., a family-owned company with divisions that have been manufacturing aerospace and automotive drive train components in the U.S. for more than 70 years.
Who We Are
We are off-road enthusiasts who understand the vehicles in which our parts are installed, as well as the hard core off-road environments where they will be used. We are honored to have our products considered “revolutionary” by experts in the off-road industry.
What We Do
At RCV, we use our engineering and manufacturing experience to develop and produce CV axles and other high performance drive line components for the automotive, truck, and bus industries. Our main focus is on patented CV Axle conversions and replacement IFS axle shafts for the automotive off-road market. RCV provides “off the shelf” solutions as well as caters to custom application projects, and other large and small driveline projects as they come in the door.
Vehicle Fitment:
2021 Ford Bronco Sasquatch RCV Front Axles
2022 Ford Bronco Sasquatch RCV Front Axles
2023 Ford Bronco Sasquatch RCV Front Axles
2024 Ford Bronco Sasquatch RCV Front Axles
Additional information
| Weight | 60 lbs |
|---|---|
| Dimensions | 47 × 9 × 5 in |
9 reviews for RCV Ultimate IFS CV Axle Set | Ford Bronco Sasquatch with M210 diff
You must be logged in to post a review.
Related products
-
Sale!Trail-GearOn Sale All November!!
Trail-Creeper 3:1 Sidekick / Tracker / Vitara Transfer Case Gears
- Suits 1991 to 1998 Suzuki Sidekick 4WD, 1991-2001 Geo Tracker 4WD, 1991-2001 Chevy Tracker 4WD, 1995-1997 Suzuki X-90 4WD, 1999-2001 Suzuki Vitara 4WD
- High Quality Materials
- Precision fitting spline fit for long life
- 72% gear reduction for more power and control on the trail
- Made out of Japanese SCM415 alloy for its greater strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- High Quality Materials
- Precision fitting spline fit for long life
- Includes Trail-Safe input and output seals
- Installation Instructions (and video down below)
(9 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD121 Front Air Locker Toyota Lexus 8″ IFS 30 Spline 3.73-
- For Use With Toyota 8″ IFS Clamshell differential with 30 Spline Axles and 3.73 And Down Factory Gears
- Usually all models that came with a manual transmission used 3.73- factory gear ratios, but you must check before ordering
- Factory R&P may use either RD111 or RD121 depending on ratio. All known aftermarket R&P sets suit RD121.
- If you are re-gearing, check with the gear manufacturer for which Air Locker to order
- Full vehicle fitment list is further down in the main description, includes 4Runner, Tacoma, FJ Cruiser, GX470, GX460
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(12 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD132 Air Locker Toyota Lexus 8″ 10 bolt 30 Spline
- For Use With Toyota 8″ 10 bolt 30 Spline solid axle – used for many years in some front and rear applications
- Full vehicle fitment list is further down in the main description, includes 4Runner, Tacoma, FJ Cruiser, GX470 – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(7 reviews) -
Bronco (2021-2024+)
Ford Bronco Diff Cover by ARB | 2021+
- Suits 2021+ Ford Bronco 2-door and 4-door models with Dana 44 Rear Axle
- High-tensile nodular iron structure protects differential and ring and pinion set from obstacles
- Computer-optimized, cross-brace design within the differential cover increases the structural rigidity of the axle acting as a truss
- Approach/departure angle optimized by angled exterior surface
- Prolonged carrier bearing life due to extra support to the bearing alignment
- Additional housing strength helps keep the ring and pinion gears meshing on the flat faces of the teeth, extending ring and pinion life and overall maximum load strength
- Magnet in the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage without removing the cover or draining the oil
- Low profile drain plug design resists damage from obstacles
- Combination of the high-filler point and dipstick allows the oil to be checked for water contamination without having to drain the oil
- Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles
- Cover is powder coated, CNC machined, and clear-coated for a durable, professional, long-lasting finish; all hardware is hardened and plated
- Tensile-cap screws (supplied) are recessed for protection against obstacles which might damage or loosen the screws
- Made in Red or Black, choose below
(3 reviews)
Ryan (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Steven (verified owner) –
This is my go-to now for off road parts.
Jacob (verified owner) –
Good quality, really nice.
Jacob (verified owner) –
It’s exactly what I wanted.
John (verified owner) –
Would definitely buy from this site again.
Jesse (verified owner) –
Would definitely buy from this site again.
Brian (verified owner) –
I received it really fast.
David (verified owner) –
Value for money, super satisfied.
Travis (verified owner) –
Would definitely buy from this site again.