“Dobinsons Tubular UCA Pair | Toyota 4Runner FJ Cruiser Lexus GX470 GX460” has been added to your cart. Continue shopping
You may be interested in…
-
SamuraiFREE SHIPPING
within 48 US StatesSuzuki Samurai 4.16:1 Transfer Case Gear Set
- Suits 1986 to 1995 Suzuki Samurai
- Low Range reduction is 4.16 to 1 (84% low range reduction). High Range reduction is 12%
- Includes new precision cut gears, counter shaft, needle bearings, shims, O-ring, gaskets, and input/output seals
- Heavy Duty Samurai T-Case Output Shaft recommended
- Made out of Japanese SCM415 alloy for its greater strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- Note: The recommended tire size for the 4.16 gears is 29″-30″
- Installation Instructions
(9 reviews) -
Upper Control Arms
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
-
- 2003-2009 Toyota 4Runner
- 2010-2024 Toyota 4Runner
- 2005-2015 Toyota Tacoma
- 2016-2023 Toyota Tacoma
- 2006+ FJ Cruiser (all years)
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
- Toyota Hilux Vigo
- Toyota Hilux Revo
- Toyota Fortuner
- Toyota Prado 120
- Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
(4 reviews) -
SamuraiFREE SHIPPING
within 48 US StatesSuzuki Samurai 6.5:1 Transfer Case Gear Set
- Suits 1986 to 1995 Suzuki Samurai
- Low Range reduction is 6.5 to 1. High Range reduction is 20% (1.7 to 1)
- Includes four new precision cut gears, counter shaft, needle bearings, shims, O-ring, gaskets, and input/output seals
- Upgraded Trail-Safe seals included at no additional cost
- Heavy Duty Samurai T-Case Output Shaft recommended
- Made out of Japanese SCM415 chromoly alloy steel for its great strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- Installation Instructions
- Special Seal Instructions
(9 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s Pair | Toyota 4Runner FJ Cruiser Lexus GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered here
(8 reviews)
Cart totals
| Subtotal | $1,209.00 |
|---|---|
| Shipping |
Shipping to FL. |
| Route Shipping Protection | $30.23 |
| Tax | $95.19 |
| Total | $1,394.42 |
