Rustys Adjustable Rear Lower Control Arms with Forged Flex Ends High Clearance JK and JL Wrangler
10008 RUSTYS FORGED FLEX END
FREE SHIPPING
within 48 US States

Rusty’s Adjustable Rear Lower Control Arms w/Forged Flex Ends High Clearance | JK & JL Wrangler

(12 customer reviews)
  • Suits Jeep JK Wrangler 2007-2017 and JL Wrangler 2018+ 2 door and 4door models
  • Forged Flex End on one side, and OE-style rubber bushing on the other
  • Massive 2 inch DOM Tubing
  • 2″ of adjustment to fine-tune pinion angle, and wheelbase
  • Forged Ends are tested to over 100,000 psi
  • Black powder coated
  • Sold as a pair, left and right
  • Made in the USA

$286.00

In Stock
Share (0)
Total: 0 Total: 0
SKU: RC-CA412HC-JKJL Categories: , , , , , , , Brand:

Description

Rusty’s JK JL Adjustable Rear Lower Arms are fabricated from thick 2″ DOM tubing and have a CNC mandrel bend to offer more flex and articulation. 1.25″ x 12 threads are used in the arms and on our forged ends for strength and easy adjustability. Our Forged Flex Ends offer greater suspension flex, adjustable preload settings, and are greasable for long life. The Forged Ends are secured with the supplied jam nuts and are tested to withstand over 100,000 psi! These arms also include Factory OEM-quality bushings installed at the axle end, and the arms themselves come powder coated in a glossy black finish. Our arms provide about 2 inches of adjustment over stock.

  • Forged Flex End on one side, and OE-style rubber bushing on the other
  • Massive 2 inch DOM Tubing
  • 2″ of adjustment to fine-tune pinion angle, and wheelbase
  • Forged Ends are tested to over 100,000 psi
  • Black powder coated
  • Sold as a pair, left and right
  • Made in the USA

Replacement Components:
Forged Flex End Replacement: (Right Hand Thread) 10004-RH
Forged Flex End Race Kit: M20572
Rubber Bushing Replacement: RC-BH830

Rusty’s heavy duty rear control arms are the some of the most affordable on the market, while adding necessary strength to the rear end.  The last thing you want when you offroad a lot is a bent arm, as this affects your alignment and your vehicle will not track straight down the road.  With thick DOM wall tubing, you can’t go wrong with a set of these.

The Rusty’s Forged Flex Ends were designed and manufactured with quality, reliability, and strength as our first priority.

The Forged Flex Ends feature 1.25″ x 12 threads, locking jam nut, Delrin bearing races, and a chromed spherical bearing. These outer casing of the forged ends offers over 100,000 psi of strength. No wimpy snap rings here, Rusty’s was the first to design and manufacture an end without snap rings; we use only threaded adjustable retainers that are CNC machined for a perfect fit. The adjustable spanner nut allows you to dial in the perfect amount of pre-load. To adjust the pre-load, simply tighten the spanner nut to the desired pressure, line up the groove in the preload nut with the set screw, and then tighten the set screw.

The Delrin races provide high strength and a superior fit while being much more durable than other poly style races. The plated Chrome Moly (short for Chromium Molybdenum) spherical bearing offers long life, high strength, and adds to the end assembly’s great flex. All rod ends come with grease fittings. Be sure to grease the joints regularly for a lifetime of quiet, reliable service.

Since all moving parts wear, Rusty’s offers inexpensive rebuild kits for all the moving parts of the joint.

Vehicle Fitment:
2007 Jeep Wrangler JK
2008 Jeep Wrangler JK
2009 Jeep Wrangler JK
2010 Jeep Wrangler JK
2011 Jeep Wrangler JK
2012 Jeep Wrangler JK
2013 Jeep Wrangler JK
2014 Jeep Wrangler JK
2015 Jeep Wrangler JK
2016 Jeep Wrangler JK
2017 Jeep Wrangler JK
2018 Jeep Wrangler JL
2019 Jeep Wrangler JL
2020 Jeep Wrangler JL
2021 Jeep Wrangler JL
2022 Jeep Wrangler JL
2023 Jeep Wrangler JL
2024 Jeep Wrangler JL
2025 Jeep Wrangler JL

About Rusty’s Off-Road

Rusty’s Off-Road is a leader in the 4X4 industry with our innovative line of Jeep specific products. Our in-house manufacturing and R & D keeps our products on the cutting edge. With our in house manufacturing we are able to control cost and sell retail at wholesale cost without sacrificing quality.

We have over 45 years of hands on experience in the off-road vehicle industry giving us the knowledge that few of our competitors have. Rusty’s has grown from a small business serving a regional market to a worldwide company. We have grown from a small 2 bay shop to an ever growing 65,000 square foot building. Yes, we too started off with torches and big hammers but today it’s high-tech measuring devises, precision machining centers, lasers, robots and a group of very dedicated employees to produce what we think are the very best in off road products.

We proudly back our products as ‘Trail Tested Tough.’ Each of our parts go through extensive prototype testing on the trails, allowing us to improve and strengthen our designs so we release only the highest quality products. Moab, Rubicon, Tellico, Wind Rock, and Jeep Jamboree events around the country have been regular stomping grounds for the Rusty’s Off Road Testing Crew over the years. Many parts have been run and tested in some of the most grueling off road races and rallies and with this abuse and testing you can be assured you will be getting the very best part built.

AROUND RUSTY’S OFF-ROAD

Growing from that 2 bay shop to this over 65,000 you think there is no way we will run out of room, well just as soon as we finished our latest construction, we quickly found out how quickly they will fill up. We have worked hard to keep things organized and invested hours in setting up the shipping dept to get parts shipped as fast as we can. 

SOME OF OUR SHOP EQUIPMENT

We’re proud to say that we use state-of-the-art equipment to manufacture all of our products right here in the USA. We are constantly investing in new and upgraded equipment that allows us to build better products more efficiently and with a greater degree of accuracy than ever before. Rusty’s has invested in multiple new laser machines, multiple CNC machines, a pair of CNC press breaks, welding robots and much more in order to keep pace with our sales growth and new products production. In-house manufacturing allows us to maintain a level of quality control that could never be matched when outsourcing production. Keep checking back for details on our new machines and the new products we’ll be offering!

12 reviews for Rusty’s Adjustable Rear Lower Control Arms w/Forged Flex Ends High Clearance | JK & JL Wrangler

  1. Jose (verified owner) –

    It’s exactly what I wanted.

  2. Michael (verified owner) –

    Great description on the page, easy to understand what I was buying.

  3. Gregory (verified owner) –

    Spoke with Mike, he got me headed in the right direction for what I need.

  4. James (verified owner) –

    Value for money, super satisfied.

  5. Bradley (verified owner) –

    Spoke with Mike, he got me headed in the right direction for what I need.

  6. Nathan (verified owner) –

    Good quality, really nice.

  7. Jesse (verified owner) –

    This is my go-to now for off road parts.

  8. Scott (verified owner) –

    Would definitely buy from this site again.

  9. Jeffrey (verified owner) –

    Just what I needed.

  10. Anthony (verified owner) –

    Value for money, super satisfied.

  11. John (verified owner) –

    5 Stars!!

  12. Travis (verified owner) –

    Would definitely buy from this site again.

Add a review

You may also like…

  • Rusty's Adjustable Rear Upper Control Arms wForged Flex Ends JK & JL Wrangler
    • Rusty's Adjustable Rear Upper Control Arms wForged Flex Ends JK & JL Wrangler
    • Rusty's Adjustable Rear Upper Control Arms wForged Flex Ends JK & JL Wrangler
    • Rusty's Adjustable Rear Upper Control Arms wForged Flex Ends JK & JL Wrangler
    Suspension
    FREE SHIPPING
    within 48 US States

    Rusty’s Adjustable Rear Upper Control Arms w/Forged Flex Ends | JK & JL Wrangler
    • Suits Jeep JK Wrangler 2007-2017 and JL Wrangler 2018+ 2 door and 4door models
    • Forged Flex Ends on both ends
    • Rebuildable and greasable ends
    • 1.5″ inch DOM Tubing
    • Adjustment to fine-tune pinion angle, and wheelbase
    • Forged Ends are tested to over 100,000 psi
    • Black powder coated
    • Sold as a pair, left and right
    • Made in the USA
    (13 reviews)
    $355.00 Add to cart
  • Rustys Adjustable Rear Lower Control Arms with Forged Rubber Ends JK and JL Wrangler
    Suspension
    FREE SHIPPING
    within 48 US States

    Rusty’s Adjustable Rear Lower Control Arms w/Forged Rubber Ends | JK & JL Wrangler
    • Suits Jeep JK Wrangler 2007-2017 and JL Wrangler 2018+ 2 door and 4door models
    • Comes with highly flexible rubber bushings installed
    • Rubber bushings on both ends give the best possible ride quality
    • Massive 2 inch DOM Tubing
    • 2″ of adjustment to fine-tune pinion angle, and wheelbase
    • Maintenance Free Rubber Bushings
    • Black powder coated
    • Sold as a pair, left and right
    • Made in the USA
    (13 reviews)
    $286.00 Add to cart
  • Rusty's Adjustable Rear Upper Control Arms w Forged Rubber Ends Jeep JK & JL Wrangler
    • Rusty's Adjustable Rear Upper Control Arms w Forged Rubber Ends Jeep JK & JL Wrangler
    • Rusty's Adjustable Rear Upper Control Arms with Forged Rubber Ends Jeep JK & JL Wrangler
    Suspension
    FREE SHIPPING
    within 48 US States

    Rusty’s Adjustable Rear Upper Control Arms w/Forged Rubber Ends | JK & JL Wrangler
    • Suits Jeep JK Wrangler 2007-2017 and JL Wrangler 2018+ 2 door and 4door models
    • OE-style rubber bushings on both ends
    • Massive 1.5″ inch DOM Tubing
    • Adjustment to fine-tune pinion angle, and wheelbase
    • Forged Ends are tested to over 100,000 psi
    • Black powder coated
    • Sold as a pair, left and right
    • Made in the USA
    (12 reviews)
    $334.00 Add to cart

Related products

  • Dobinsons rear coil springs in teal color
    80 Series Land Cruiser (1990-1997)

    Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
    • Suits Land Cruiser 80 Series and Lexus LX450
    • C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
    • Fully Designed, Manufactured, and Finished In Australia
    • Ultra modern design technology, Fully Scragged & Load Tested
    • State of the Art Heat Treatment, High Intensity Shot Peened
    • Formed on Precision Mandrels, Precise End Configurations
    • Durable Powder Coat Finish
    • 500/510mm free height, 16mm wire, 179LBF/in rate
    • Sold in Pairs
    (3 reviews)
    $270.00 Add to cart
  • Dobinsons Square Top Ubolts
    Tundra 2nd Gen (2007-2021)

    Dobinsons UB59-437K Rear U-Bolts (2 Pairs)
    • These suit 2007-2021 Toyota Tundra, 2005-2023 Toyota Tacoma with thick/heavy leaf packs (like L59-112-R) and 2019-2023 Ford Ranger USA Spec with thick/heavy leaf packs (like L19-133-R)
    • Made from the highest quality raw materials to give years of life under the harshest conditions
    • Over 60 years of leaf spring design and manufacturing
    • Includes 4 U-bolts, enough for 1 vehicle
    • Requires 2″ lift leaf springs to ensure proper fitment
    • These are a 30mm longer version of UB59-453-2K Ubolts
    • These are 210mm / 8.25″ in length
    • Photo for illustration purposes.  These are square at the top
    (7 reviews)
    $90.00 Add to cart
  • DOBINSONS WA59-522K ADJUSTABLE REAR UPPER TRAILING ARMS | 4RUNNER FJ CRUISER GX470 GX460
    • DOBINSONS WA59-522K ADJUSTABLE REAR UPPER TRAILING ARMS | 4RUNNER FJ CRUISER GX470 GX460
    • Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460 vs stock
    Dobinsons

    Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
    • Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
    • Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
    • Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
    • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
    • Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
    • Zinc plated, then powder coated black, for the ultimate finish and protection
    • Instructions written down below in the description
    (12 reviews)
    $345.00 Add to cart
  • Dobinsons Upper Control Arms UCAs
    On Backorder
    • Dobinsons Upper Control Arms UCAs
    • Dobinsons 5th gen 4runner IMS suspension installed with KDSS
    • Dobinsons 5th gen 4runner IMS suspension installed with KDSS
    Exceptions
    FREE SHIPPING
    within 48 US States
    ETA is late December

    Dobinsons Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
    • Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
    • Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
    • Has 3 degrees of caster built in, no adjustability or settings required
    • Has more clearance around the ball joint than factory UCA’s for better tire clearance
    • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
    • Works for any lift height, as factory alignment correction will be enhanced with these
    • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
    • Curved washers face outwards away from bushings during installation, per the product video
    • Product Video
    • Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
    • Also sold without ball joints
    • Replacement Ball Joints can be ordered here
    (8 reviews)
    $795.00 Add to cart