Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
SPC 25455 | UCA’s for Land Cruiser 100 Series & LX470 Pair
- Suits 1998-2007 Toyota Landcruiser 100 Series and 1998-2007 Lexus LX470
- Compatible with or without AHC
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
- We offer replacement ball joints as well
$849.96
In Stock
EAN: 82642254553
SKU: 25455
Categories: 100 Series Land Cruiser IFS (1998-2007), Control Arms - 100 Series, Exceptions, LX470, Performance Upgrades - 100 Series, SPC, Suspension, Upper Control Arms
Brand: SPC
Description
SPC 25455 Upper Control Arm Set. SPC has been at the forefront of designing and building rugged, adjustable front upper control arms for the demands of lifted vehicles. Trucks and SUVs run out of factory alignment adjustment when you install lift kits. With our patented design our upper control arms provide additional camber and caster change. Tough enough for off-road and racing applications, SPC arms are the industry standard.
SPC 25455 – Adjustable Upper Control Arms
1998-2007 Toyota Landcruiser 100 Series; 1998-2007 Lexus LX470
Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC’s adjustable front upper control arms. Featuring an upgraded greaseable ball joint and xAxis™ sealed joints with in bonded rubber bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC’s integrated tubular and cast steel designs provide the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs.
- Get more droop travel: SPC’s arm has improved clearance to get around the spring bucket. With 80° of articulation in the upgraded ball joint and free pivoting xAxis joints, SPC’s arm gives you maximum droop travel.
- Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s arms have +1° of caster built into them. Using its patented ball joint design the arm will get you 0° to +4° of caster and ±2° of camber, so you can put your alignment angles back to specification.
Adjustment range: Camber ±2.0°
Caster -1.0° to +3.0°
Installation time: .8 hr/side
Patent No. US 7,513,514
Vehicle Fitment:
1998 Toyota Land Cruiser SPC Upper Control Arms
1999 Toyota Land Cruiser SPC Upper Control Arms
2000 Toyota Land Cruiser SPC Upper Control Arms
2001 Toyota Land Cruiser SPC Upper Control Arms
2002 Toyota Land Cruiser SPC Upper Control Arms
2003 Toyota Land Cruiser SPC Upper Control Arms
2004 Toyota Land Cruiser SPC Upper Control Arms
2005 Toyota Land Cruiser SPC Upper Control Arms
2006 Toyota Land Cruiser SPC Upper Control Arms
2007 Toyota Land Cruiser SPC Upper Control Arms
1998 Toyota Lexus LX470 SPC Upper Control Arms
1999 Toyota Lexus LX470 SPC Upper Control Arms
2000 Toyota Lexus LX470 SPC Upper Control Arms
2001 Toyota Lexus LX470 SPC Upper Control Arms
2002 Toyota Lexus LX470 SPC Upper Control Arms
2003 Toyota Lexus LX470 SPC Upper Control Arms
2004 Toyota Lexus LX470 SPC Upper Control Arms
2005 Toyota Lexus LX470 SPC Upper Control Arms
2006 Toyota Lexus LX470 SPC Upper Control Arms
2007 Toyota Lexus LX470 SPC Upper Control Arms
13 reviews for SPC 25455 | UCA’s for Land Cruiser 100 Series & LX470 Pair
You must be logged in to post a review.
Related products
-
Dobinsons
Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(11 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/510mm free height, 16mm wire, 179LBF/in rate
- Sold in Pairs
(3 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Big Bore Land Cruiser Steering Damper for 60 70 80 series 1980-1997
- Suits Land Cruisers, Series 60, 61, 62, 70, 71, 73, 74, 75, and 80 series and Lexus LX450 from 1980-1997
- A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
- If you don’t know how old your current steering damper is, then it’s time to replace it
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert
- Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals
- High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place
- 650mm extended, 420mm compressed
(7 reviews) -
Dobinsons
Dobinsons Front IFS Diff Drop Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
(17 reviews)
Bradley (verified owner) –
Value for money, super satisfied.
Jose (verified owner) –
This is my go-to now for off road parts.
Jesse (verified owner) –
Would definitely buy from this site again.
Charles (verified owner) –
Very good customer service, super friendly.
Joseph (verified owner) –
Would definitely buy from this site again.
Ryan (verified owner) –
It’s exactly what I wanted.
Robert (verified owner) –
Just what I needed.
Robert (verified owner) –
Great description on the page, easy to understand what I was buying.
Brian (verified owner) –
Would definitely buy from this site again.
Patrick (verified owner) –
Good quality, really nice.
Christopher (verified owner) –
Value for money, super satisfied.
Robert (verified owner) –
Very fast delivery.
William (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.