Your cart is currently empty!
Sale!
On Sale All November!!
Suzuki Exhaust Header – Samurai and Sidekick – 1.3L 1.6L 8V Engines
- Suits Suzuki Samurai, Suzuki Sidekick, and Geo Tracker with the 1.3L or 1.6L 8V Engines (will not suit 16V)
- Manufactured by one of the best header manufacturers in the world
- 3/8″ thick port matched head flange matches the Suzuki’s rectangular exhaust ports
- Every tube is CNC Mandrel bent to ensure maximum flow from each header pipe
- TIG welded fully stainless steel exhaust header is designed for a long service life
- OEM Style Header Gasket
- Squared at header flange to match head port
- EGR Passage tube welded into header
- O2 Sensor Port located at lower collector
- Minor welding is required to connect the collector into the factory exhaust system
- NOTE: This header is not smog legal in California and is for off-road use only in California. For all other states, check all applicable laws before ordering
Original price was: $315.00.$267.75Current price is: $267.75.
In Stock
SKU: SX-SSH
Categories: Exhaust, Low Range Offroad, Samurai, Sidekick/Tracker (1988-1998)
Brand: Low Range Offroad
Description
Suzuki Samurai and Sidekick Stainless Steel Header
Low Range Off-Road’s 8-Valve Tri-Y Header is the absolute highest quality header available for 8-Valve Samurais, Sidekicks, and Trackers. This is the last header you will ever need to buy! The brand new TIG welded fully stainless exhaust header is designed for a long service life. A 3/8″ thick port matched head flange matches the Suzuki’s rectangular exhaust ports while eliminating warps and leaks. The header also features an O2 sensor port at the 3-bolt flange. This header design adds horsepower and increases fuel economy.
OEM Style Header Gasket
Most header kits include a sub-standard exhaust gasket. Low Range Off-Road Tri-Y headers come with an OEM style gasket. Why should you use an OEM Suzuki style header gasket? Suzuki’s header gasket design includes spark plug wire heat shields. Even though spark plug wires are insulated, heat can cause a wire’s resistance to raise. Using a gasket without a heat shield can cause ignition problems that may not be easily identified. It is always best to keep the spark plug wires cool. The OEM style header gasket also aligns correctly with exhaust ports and bolt holes.
O2 Sensor Port Located at Collector
Many of our competitors place their O2 sensor bungs high up on the header tubes, often reading only 2 of the 4 cylinders. This terrible design does not correct for fuel issues on the other two cylinders. We place our O2 sensor bungs at the collector to ensure fuel is being monitored efficiently and correctly on all 4 cylinders. This is especially important on 8-valve TBI engines.
The complete kit includes header, upper flange gasket, collector kit, lower flange gasket, and hardware.
Minor welding is required to connect the collector into the factory exhaust system.
| NOTE: This header is not smog legal in California and is for off-road use only in California. For all other states, check all applicable laws before ordering. |
Vehicle Fitment:
1989-1995 Suzuki Sidekick 1.3L/1.6L (8V Engines Only)
1989 Suzuki Sidekick Exhaust Header
1990 Suzuki Sidekick Exhaust Header
1991 Suzuki Sidekick Exhaust Header
1992 Suzuki Sidekick Exhaust Header
1993 Suzuki Sidekick Exhaust Header
1994 Suzuki Sidekick Exhaust Header
1995 Suzuki Sidekick Exhaust Header
1986-1995 Suzuki Samurai 1.3L/1.6L (8V Engines Only)
1986 Suzuki Samurai Exhaust Header
1987 Suzuki Samurai Exhaust Header
1988 Suzuki Samurai Exhaust Header
1990 Suzuki Samurai Exhaust Header
1990 Suzuki Samurai Exhaust Header
1991 Suzuki Samurai Exhaust Header
1992 Suzuki Samurai Exhaust Header
1993 Suzuki Samurai Exhaust Header
1994 Suzuki Samurai Exhaust Header
1995 Suzuki Samurai Exhaust Header
1989-1995 Geo Tracker 1.3L/1.6L (8V Engines Only)
1989 Geo Tracker Exhaust Header
1990 Geo Tracker Exhaust Header
1991 Geo Tracker Exhaust Header
1992 Geo Tracker Exhaust Header
1993 Geo Tracker Exhaust Header
1994 Geo Tracker Exhaust Header
1995 Geo Tracker Exhaust Header
1989-1995 Chevrolet Sidekick 1.3L/1.6L (8V Engines Only)
1989 Chevrolet Tracker Exhaust Header
1990 Chevrolet Tracker Exhaust Header
1991 Chevrolet Tracker Exhaust Header
1992 Chevrolet Tracker Exhaust Header
1993 Chevrolet Tracker Exhaust Header
1994 Chevrolet Tracker Exhaust Header
1995 Chevrolet Tracker Exhaust Header
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Warranty Exclusions
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
To begin your warranty claim:
-
- Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer. Ship all products to:
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
- Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.
6 reviews for Suzuki Exhaust Header – Samurai and Sidekick – 1.3L 1.6L 8V Engines
You must be logged in to post a review.
Related products
-
Sale!
Trail-GearOn Sale All November!!Longfield Chromo Suzuki Rear Axle Shafts Pair for Sidekick & Tracker
- Suits 1989 to 1998 Suzuki Sidekick, Geo Tracker and Chevy Tracker with 4-bolt style axles
- Forged & heat-treated 4340 chromoly steel rear axle shafts – 120° of twist
- Includes set of (1) long side & (1) short side rear axle shafts, new axle studs and Longfield™ axle decals
- 26 spline ends, same as OEM
- Ideal for use with lockers to prevent snapped axle shafts
- Installation Instructions
- Note: Axles are 4-bolt style. Check your axles before ordering. If you have 5-bolt style axles, you will need to obtain early model brake backing plates (not included) in order to use these axles on your vehicle.
- Here is the new wheel bearing and seal kit to go with these axle shafts – order 2 per vehicle
(9 reviews) -
Sale!On BackorderSidekick/Tracker (1988-1998)On Sale All November!!
Dobinsons C57-016 Front Coils | Suzuki Sidekick and Tracker – Pair
- Dobinsons C57-016 Front 40mm Lifted Coil Springs for the Suzuki Sidekick and Tracker 1.6L 16 Valve engine 1988-1997
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(10 reviews) -
Sale!Trail-GearOn Sale All November!!
Trail-Creeper 3:1 Sidekick / Tracker / Vitara Transfer Case Gears
- Suits 1991 to 1998 Suzuki Sidekick 4WD, 1991-2001 Geo Tracker 4WD, 1991-2001 Chevy Tracker 4WD, 1995-1997 Suzuki X-90 4WD, 1999-2001 Suzuki Vitara 4WD
- High Quality Materials
- Precision fitting spline fit for long life
- 72% gear reduction for more power and control on the trail
- Made out of Japanese SCM415 alloy for its greater strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- High Quality Materials
- Precision fitting spline fit for long life
- Includes Trail-Safe input and output seals
- Installation Instructions (and video down below)
(9 reviews) -
Sale!Sidekick/Tracker (1988-1998)On Sale All November!!
Dobinsons Lift Kit | Suzuki Sidekick + Geo Tracker 1988-1998
- Dobinsons Complete Suspension Lift Kit for the Suzuki Sidekick and Tracker LWB (Long Wheel Base) 1988-1997
- These lift 40mm (1.6″) Front and 30mm (1.2″) Rear, as they come, or you can add the coil spacers to gain extra lift height
- Take note that adding extra lift height to the front will result in reduces camber and it could be harder to get a proper wheel alignment without custom modifications to get a better alignment
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- GS57-620 struts are 501mm extended, 304mm compressed
- GS57-621 rear shocks are 505mm extended, 318mm compressed
(20 reviews)
David (verified owner) –
Just what I needed.
Mark (verified owner) –
This is my go-to now for off road parts.
Bryan (verified owner) –
Very good customer service, super friendly.
Jesse (verified owner) –
I received it really fast.
Kenneth (verified owner) –
Just what I needed.
Jeffrey (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.