Your cart is currently empty!
Sale!
15% off Year End Sale
Wheeler’s 2.0″ Lift Add-A-Leaf Set for 2005-2023 Tacoma
- Suits 2005-2015 and 2016+ Tacoma 4×4 and Pre-Runner
- Includes 2 single add-a-leafs and 2 longer center pins
- Works with factory length u-bolts or aftermarket
- Adds 2.0″ of lift approximately on dual cab short bed models. Long bed models won’t see as much lift
- Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
- Feature 60mm width, diamond cut ends and anti-friction pads for smooth, squeak free performance
- Instructions
Original price was: $108.00.$92.00Current price is: $92.00.
In Stock
SKU: WHE-AAL32-KIT
Categories: Add-a-Leaf, Excluded, Leaf Springs, Leaf Springs - Tacoma 2nd Gen, Leaf Springs - Tacoma 3rd Gen, Suspension, Tacoma 2nd Gen (2005-2015), Tacoma 3rd Gen (2016-2023), Wheelers Off Road
Brand: Wheeler's Off Road
Description
Tacoma AAL – WHEELER’S OFF-ROAD 2.0″ LIFT ADD-A-LEAF SET FOR 2005+ TOYOTA TACOMA
This Tacoma AAL by Wheeler’s Off-Road single leaf Add-A-Leaf Set (2 leafs) is made specifically for the 2005+ Toyota Tacoma. They work with your factory length u-bolts and even fit the factory TSB leaf springs.
Wheeler’s Off-Road custom manufactures add a leaf kits for 05-current Tacoma trucks. Our add a leaf kits feature 60mm width, diamond cut ends and anti-friction pads for smooth, squeak free performance. They are tuned to enhance load performance while providing a good ride. Center Pins are included.
***NOTE: Lift amounts are approximate. Double Cab Long Bed Tacoma trucks may experience less lift than listed.
10 reviews for Wheeler’s 2.0″ Lift Add-A-Leaf Set for 2005-2023 Tacoma
You must be logged in to post a review.
Related products
-
Tundra 2nd Gen (2007-2021)
Dobinsons UB59-437K Rear U-Bolts (2 Pairs)
- These suit 2007-2021 Toyota Tundra, 2005-2023 Toyota Tacoma with thick/heavy leaf packs (like L59-112-R) and 2019-2023 Ford Ranger USA Spec with thick/heavy leaf packs (like L19-133-R)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- These are a 30mm longer version of UB59-453-2K Ubolts
- These are 210mm / 8.25″ in length
- Photo for illustration purposes. These are square at the top
(7 reviews) -
Dobinsons
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews) -
Suspension
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
(7 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
- Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
- You must choose what coils, shocks and other components you want to add
(13 reviews)
Jeremy (verified owner) –
Just what I needed.
Adam (verified owner) –
Great description on the page, easy to understand what I was buying.
John (verified owner) –
Good quality, really nice.
Jonathan (verified owner) –
I received it really fast.
Justin (verified owner) –
This is my go-to now for off road parts.
John (verified owner) –
Good quality, really nice.
Michael (verified owner) –
It’s exactly what I wanted.
Jose (verified owner) –
Great description on the page, easy to understand what I was buying.
Jose (verified owner) –
*****
Brian (verified owner) –
Just what I needed.