Sale!
Dobinsons IMS 4runner kit
DOBINSONS IMS kit with black coils
DOBINSONS IMS kit with red coils
Dobinsons IMS 4runner kit
Dobinsons MRA59-A700 MRA installed on a 5th Gen Toyota 4Runner
Dobinsons Upper Control Arms UCAs
Lexus GX460 with Dobinsons 2" front and rear suspension lift installed
Dobinsons Lexus GX460 Snorkel Kit spacecoastadventures
On Sale All November!!

Dobinsons 1.5-3.5″ IMS Lift Kit | Lexus GX460 2010-2023

(21 customer reviews)
  • Every IMS suspension option from Dobinsons to lift your Lexus GX460 all on one page
  • Here you can lift from a low height up to the maximum bolt-on lift height by making your selections below
  • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • Coils are specifically suited to the additional accessory load (weight) on the vehicle
  • Fully rebuildable and re-valvable
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Base Kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs

Original price was: $1,770.00.Current price is: $1,504.50.

In Stock
Select Front Coils
OE spring rate on a V8 GX460 is 730LB (same as the C59-350, 352,354). Lighter than stock springs shouldn't be use unless you want it softer than stock, which will increase nose diving while braking.
Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
C59-300 - 1.5" with stock weight (comfort spring rate)
C59-302 - 2.0" with stock weight (comfort spring rate)
C59-314 - 2.5" with stock weight (comfort spring rate)
C59-350 - 2" with stock weight
C59-352 - 2.5" with stock weight, 2" with 110-220lbs weight
C59-354 - 2" with 220-350lbs weight, 2.5" with 110lbs weight
Select Front Struts
IMS59-50700 is to be used with any lift height 0-2.5", the coils give the lift. IMS59-50574 is an Extended travel strut, that can add up to 1" to coil spring height to get 2-3.5" of lift, depending on coils used
IMS59-50700 - IMS non-resi monotube, adjustable height (0-2.5")
IMS59-50574 - IMS non-resi monotube Extended travel (2-3.5" lifts), coil seat set higher to add up to 1" extra lift
Select Rear Coils
Discard passenger weight. Weight listed refers to additional product weight such as roof rack, drawers, rear bumper, swing out spare, etc. For most coils, 100lbs of added weight drops the rear by about 1/4"
Vehicles with KDSS lifting 1.5" or more should add a PS59-4025 trim spacer for the passenger side
C59-323 - Stock height up to 1/2" lift
C59-599 - 3/4-1" with stock weight
C59-505 - 1.25-1.5" with stock weight
C59-325 - 1.75-2" with stock weight
C59-327 - 1.75" with 200-400lbs weight, 2.25" stock weight
C59-329 - 1.75" with 400-800lbs weight
C59-331 - 1.75" with 800-1200lbs weight (teal only)
C59-675V - 2.25" with stock weight - variable rate coil
C59-677V - 3" with stock weight, 2.5" with 200-300LBS - variable rate coil
C59-701V - 3" with 300-600LBS of constant weight - variable rate coil
C59-749V - 3" with 600-800LBS or more of constant weight - variable rate coil
C59-849V - 3" long travel, 1000LBS+ constant rear load (TEAL ONLY)
Need to Convert From Airbags to Coils?
Dobinsons airbag to coil conversion kit is what you'll need. This kit adds 1/2" to listed coil height
Rear Shocks
Only those people looking to do a full long travel rear can order the ***575 shocks. They will cause issues if you don’t have the correct replacement brake lines, bump stops, and sway bar links in place.
KDSS vehicles CANNOT use long travel rear shocks
IMS59-50701 - IMS non-resi monotube light to heavy loads (0-3" lift)
IMS59-50575 - IMS non-resi monotube for 3"+ LONG TRAVEL only
MRA59-A701 - 3-Way Adjustable Remote Resi monotube shocks (0-3" lift) - adjust the valving if your load weights vary for trips, towing, etc
Only those people looking to do a full long travel rear can order the ***575 shocks. They will cause issues if you don’t have the correct replacement brake lines, bump stops, and sway bar links in place.
KDSS vehicles CANNOT use long travel rear shocks
IMS59-50701 - IMS non-resi monotube light to heavy loads (0-3" lift)
IMS59-50575 - IMS non-resi monotube for 3"+ LONG TRAVEL only, not for KDSS
MRA59-A701 - 3-Way Adjustable Remote Resi monotube shocks (0-3" lift) - adjust the valving if your load weights vary for trips, towing, etc
MRA59-A575 - 3-Way Adjustable Remote Resi monotube shocks 3"+ LONG TRAVEL only, not for KDSS - adjust the valving if your load weights vary for trips, towing, etc
Add New UCA's?
New Upper Control Arms (UCA's) can greatly increase the quality of the wheel alignment, mainly in the caster setting, improving steering and handling. Should be used for 2.5″ or more of lift
Add a Diff Drop Kit?
Diff drop kit is for 3″+ lift, or when using 574 long travel struts to avoid CV bind at full droop
Add New Strut Mounts?
If you want to add new front strut top mounts so you don't have to separate the old coilovers and reuse the mounts, add that here
Add Front Strut Assembly?
If you want the front coils, struts and new strut mounts (must be added above) to be assembled prior to shipping, add that here
Assembled Coil Seat Height
If you've chosen to have the struts assembled, select what coil seat height you would like. Standard is 213mm and only the coils do the lifting. 220mm adds 1/2" of lift. 226mm adds 1" of lift, so using a 2" coil with the 226mm raised seat height gives 3" of lift, for example
Add Front Swaybar Relocation Kit? (only non-KDSS vehicles)
The Dobinsons front swaybar relocation kit repositions the front sway bar (non KDSS models only) for proper clearance and working angle when lifted 2" or more.
Add Extended Front Swaybar links? (only non-KDSS vehicles)
Factory sway bar links are prone to bending and breaking and can even puncture your CV boots. All-Pro's heavy-duty Toyota front sway bar links replace the weak stock links using top quality Teflon lined 3/4" Heim Joints and hefty .156 wall DOM tubing.
Add Extended Rear Sway Bar Links? (only non-KDSS vehicles)
For 2" or more, the stock sway bar angle is out of alignment and inhibits proper articulation and comfort. Adding longer links corrects this
Add KDSS Spacers?
When lifting the vehicle 2" or more with KDSS, the KDSS Spacer Kit from Treaty Oak Offroad will need to be added to level out the sway bars front and rear to balance the vehicle (removing lean) and also provide additional wheel travel without the KDSS system limiting the suspension travel.  This spacer kit bolts between the original sway bar mounts, 1 on the front and 2 on the rear.  Some trimming of some skid plates up front may be required if they don't allow enough clearance for the sway bar at full droop with the Treaty Oak Spacer kit installed.
This is a requirement for any 3" rear lift.
Add Front Bump Stops?
If you regularly offroad, extending your bump stops helps reduce the harsh impact when the front bottoms out. Click the small box to the right of the product for more information.
Add Rear Bump Stops?
For those who regularly offroad and stand a chance to bottom out more often, or for those running the 575 long travel shocks, new bump stops should be added
Add Rear Panhard Rod?
A heavy duty adjustable panhard rod will allow you to re-center your axle. This can also be used with any height, but for those needing a stronger panhard rod than stock
Add New Front High-Clearance CV Boots?
If your vehicle is older, and you plan to lift 3" or more, new high-clearance CV boots are a great option
Add Rear Trailing Arms?
For heavy offroading, or for true long travel, new upper and lower adjustable trailing arms help correct pinion angle, give better articulation, and are much much stronger than stock
Add Rear Trailing Arm Skids?
Protect the vulnerable rear lower link mounts on your vehicle with a pair of lower link skids from RCI Metalworks
Add Rear Lower Shock Mount Skids?
Protect your rear low hanging shock mounts with RCI heavy duty rear shock mount skid plates
Add Airbags?
If you regularly tow with your vehicle, carry a motorcycle on a hitch mount, or have huge variances between daily weight and loaded trip weight, a set of Firestone helper air springs will be very useful. Inserts inside your rear coil springs to add additional load support, Manually inflate or deflate the air bags to add or remove support or height.
Firestone 4135 is for 0-1.5" of lift
Firestone 4108 is for 2-3" of lift
Upgrade Front Brakes?
This is not required with the suspension, but considering that when adding a lot more weight and rolling mass to the vehicles, the stock brakes aren't doing the job they're supposed to. Adding the Powerbrake D-Line Rotor and Pad kit gives bolt-on excellent performance without needing to replace so many parts. Or go all out with the X-Line Big Brake Kit and add massive front stopping power with new 6-piston calipers, brake lines, pads and rotors (requires 17" wheels)
Upgrade Rear Brakes?
Share (0)
Total: 0 Total: 0
SKU: GX460IMSKIT Categories: , , , , , Tags: , Brand:

Description

A Lexus GX460 IMS lift kit – Dobinsons offers this complete suspension system for the 2010 to 2023 Lexus GX460 4.6L V8, with various lift height and coil load options to suit whatever accessory weight you have added to your vehicle, and your desired lift height.  Contact Dobinsons directly if you have questions before ordering your Lexus GX460 lift kit.

Most customers when buying a Lexus GX460 IMS lift kit add 3″ of lift to the front and around 2″ to the rear, to help level out the vehicle from front to back.  You have your choice though of how you would like it to be.

A lift of 3″ in the front requires new Upper Control Arms for proper alignment and good ride quality.  These are sold separately.

IMS Product Features

  • Fully rebuildable and re-valvable
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height

dobinsons IMS specifications specs sheet

Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, our 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As we export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

Dobinsons IMS Monotube Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilising the Monotube design, Dobinsons IMS Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.

The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.

The micro-polished, hard chromed and heat treated shock shaft, CNC aluminium high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.

Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

All Dobinsons™ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

***2.5″ or more of lift, new UCA’s are recommended***
NOTE: For a lift of 3″ in the rear, new extended brake lines and minimum of 2″ bump stop extensions are required to be used with our long travel rear shocks.  At full extension, the stock brake lines could get damaged, and with stock bump stops in place, the shocks will bottom out before the bump stop fully engages, which will quickly destroy the shocks.
Lifting the rear of the vehicle more than 2″ with KDSS, KDSS Rear Spacer Kit from Treaty Oak Offroad will need to be added to level out the sway bars front and rear and also provide additional wheel travel without the KDSS system limiting the suspension travel.  This spacer kit bolts between the original sway bar mounts, 1 on the front and 2 on the rear.  Some trimming of some skid plates up front may be required if they don’t allow enough clearance for the sway bar at full droop with the Treaty Oak Spacer kit installed.
For a video describing the IMS struts and shocks, check this out: https://youtu.be/Npfx40VD3kM

2010 Lexus GX460 Lift Kit
2011 Lexus GX460 Lift Kit
2012 Lexus GX460 Lift Kit
2013 Lexus GX460 Lift Kit
2014 Lexus GX460 Lift Kit
2015 Lexus GX460 Lift Kit
2016 Lexus GX460 Lift Kit
2017 Lexus GX460 Lift Kit
2018 Lexus GX460 Lift Kit
2019 Lexus GX460 Lift Kit
2020 Lexus GX460 Lift Kit
2021 Lexus GX460 Lift Kit
2022 Lexus GX460 Lift Kit
2023 Lexus GX460 Lift Kit

21 reviews for Dobinsons 1.5-3.5″ IMS Lift Kit | Lexus GX460 2010-2023

  1. David (verified owner) –

    Good quality, really nice.

  2. Jesse (verified owner) –

    It’s exactly what I wanted.

  3. David (verified owner) –

    Very good customer service, super friendly.

  4. Kevin (verified owner) –

    Value for money, super satisfied.

  5. Brandon (verified owner) –

    I received it really fast.

  6. Adam (verified owner) –

    Great description on the page, easy to understand what I was buying.

  7. James (verified owner) –

    Just what I needed.

  8. Daniel (verified owner) –

    *****

  9. Anthony (verified owner) –

    Very good customer service, super friendly.

  10. Justin (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  11. Michael (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  12. James (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  13. Brandon (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  14. Kenneth (verified owner) –

    Spoke with Mike, he got me headed in the right direction for what I need.

  15. Patrick (verified owner) –

    I received it really fast.

  16. Paul (verified owner) –

    Just what I needed.

  17. David (verified owner) –

    Just what I needed.

  18. Jeffrey (verified owner) –

    Great description on the page, easy to understand what I was buying.

  19. Stephen (verified owner) –

    It’s exactly what I wanted.

  20. James (verified owner) –

    Would definitely buy from this site again.

  21. Thomas (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

Add a review

You may also like…

  • Timbren Front Active Bump Stops ABSTOF
    • Timbren Front Active Bump Stops ABSTOF
    • Timbren Front Active Bump Stops
    Timbren
    FREE SHIPPING
    within 48 US States

    Timbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
    • Suits 2000-2024 Tundra,  2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
    • Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
    • Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all.  Inspect your vehicle before ordering
    • Maintain Full Axle Travel
    • Smooth Axle Engagement and Disengagement
    • Enhance Suspension Performance
    • Progressive Spring Rate
    • Absorbs Energy and Cushions Road Shocks
    • Stronger Than OEM Bumpstops
    • Easy Installation – Installation Video
    • Satisfaction Guarantee
    • Lifetime Warranty
    • Click here for instructions
    (12 reviews)
    $269.36 Add to cart
  • Timbren Rear Active Bump Stops ABSTORSEQ
    • Timbren Rear Active Bump Stops ABSTORSEQ
    • Timbren Rear Active Bump Stops ABSTORSEQ
    Timbren
    FREE SHIPPING
    within 48 US States

    Timbren ABSTORSEQ Active Off Road Rear Bump Stops | Toyota and Lexus SUV’s
    • Maintain Full Axle Travel
    • Smooth Axle Engagement and Disengagement
    • Enhance Suspension Performance
    • Progressive Spring Rate
    • Absorbs Energy and Cushions Road Shocks
    • Stronger Than OEM Bumpstops
    • Easy Installation
    • Satisfaction Guarantee
    • Lifetime Warranty
    • Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series

    • Specs:

      • 2,000 lb capacity
      • 4,800 lb bump load capacity
      • Overall kit height = 5”
      • Total deflected (compressed) height = 2.75”
      • Amount of deflection (compression) = 2.25”
    • Click here for instructions
    • Installation video from Exit Offroad
    • Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs.  Timbren make 2 options, they do not include any longer bolts which may be required
      • A25722-90F00 (1/2″ spacer)
      • A25723-90AD00 (1″ spacer)
    (13 reviews)
    $269.36 Add to cart

Related products

  • Sale! Dobinsons teal variable rate rear coil springs pair
    • Dobinsons teal variable rate rear coil springs pair
    • Dobinsons C59-701V installed
    4Runner 4th Gen (2003-2009)
    On Sale All November!!

    Dobinsons C59-675V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
    • Fully Designed, Manufactured, and Finished In Australia
    • Ultra modern design technology, Fully Scragged & Load Tested
    • State of the Art Heat Treatment, High Intensity Shot Peened
    • Formed on Precision Mandrels, Precise End Configurations
    • Durable Powder Coat Finish
    • Sold in Pairs
    • 470mm free height, 16mm wire diameter, 157-230LBF/IN  variable spring rate
    (15 reviews)
    Original price was: $305.00.Current price is: $259.25. Select options
  • Sale! Dobinsons pair of shocks
    • Dobinsons pair of shocks
    • Dobinsons Twin Tube Shocks in black paint
    • Dobinsons GS59-940 rear shocks on a Tacoma installed
    Dobinsons
    On Sale All November!!

    Dobinsons GS59-940 Pair Rear Shocks | Tacoma 05-23 Tundra 00-06
    • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
    • Superior Design, thicker walls, longer travel
    • Japanese NOK Multi-Lip seals
    • Fuchs German shock absorber oil
    • Natural Rubber Bushings for reduced noise vibration and flexibility
    • Teflon Piston Rings
    • Double Chrome hardened rods
    • Metal shock boots to protect rod from damage
    • Matched to compliment Dobinsons Complete Suspension Systems
    • Dobinsons GS59-940 Specifications: 614mm extended, 361mm compressed, 50mm body size
    • Pin mount top, eyelet lower
    • Available in Yellow or Black
    • Sold in pairs
    (6 reviews)
    Original price was: $310.00.Current price is: $263.50. Select options This product has multiple variants. The options may be chosen on the product page
  • Sale! Dobinsons GS59-701 twin tube shock absorber
    • Dobinsons GS59-701 twin tube shock absorber
    • Dobinsons Twin Tube Shocks in black paint
    • Dobinsons Twin Tube Shocks features and benefits
    4Runner 5th Gen (2010-2024)
    On Sale All November!!

    Dobinsons GS59-701 Rear Shocks Pair | 4Runner FJ Cruiser GX470 GX460
    • Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
    • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
    • Superior Design, thicker walls, longer travel
    • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
    • Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
    • Matched to compliment Dobinsons Complete Suspension Systems
    • Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
    • Pin top mount, eyelet lower mount
    • Available in Yellow or Black
    • Photos for illustration purposes
    (6 reviews)
    Original price was: $310.00.Current price is: $263.50. Select options This product has multiple variants. The options may be chosen on the product page
  • Sale! Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit PB59-1101K
    Dobinsons
    On Sale All November!!

    Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
    • Suits Toyota Tacoma 2005-2023
    • For any lift height, or no lift. These are OE replacement bushings.
    • Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
    • Pressing of OE bushings may be necessary during removal and installation
    • Replaces OE bushings in all 6 positions of rear leaf springs, top and bottom of the shackle and the fixed end
    • Greasable bolts are sold in pairs, sold separately
    • OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
    • Tacoma poly bushing kit installation
    • Link to Greasable Bolts, Click here
    (14 reviews)
    Original price was: $105.00.Current price is: $89.25. Add to cart