Your cart is currently empty!
Dobinsons IMS59-50649 2.2″ IFP Rear Shocks Pair
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 614mm extended, 409mm compressed
- Should be run with a suspension lift of 1.75″ or more
Original price was: $580.00.$493.00Current price is: $493.00.
In StockDescription
Pair of rear Dobinsons IMS59-50649 Internal Reservoir Monotube shocks. These come with new rubber bushings and required washers for installation. Select Dobinsons coil springs based on desired lift height and load capacity. Coil springs are all based on desired lift height, how much weight your vehicle has added over stock, and what type of ride quality you are looking for once it’s all been installed.
Full vehicle list is down below
Link to Youtube video: https://youtu.be/Npfx40VD3kM
Link to shop for suitable front coils: https://exitoffroad.com/product-category/suspension/coil-springs/
Dobinsons IMS Monotube IMS59-50649 Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilising the Monotube design, Dobinsons IMS59-50649 Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.
The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.
The micro-polished, hard chromed and heat treated shock shaft, CNC aluminium high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.
Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride
Suits these vehicles:
1975 Land Cruiser FJ40 Rear
1976 Land Cruiser FJ40 Rear
1977 Land Cruiser FJ40 Rear
1978 Land Cruiser FJ40 Rear
1979 Land Cruiser FJ40 Rear
1972 Toyota Land Cruiser FJ45 Rear (all years)
1973 Toyota Land Cruiser FJ45 Rear (all years)
1974 Toyota Land Cruiser FJ45 Rear (all years)
1975 Toyota Land Cruiser FJ45 Rear (all years)
1976 Toyota Land Cruiser FJ45 Rear (all years)
1977 Toyota Land Cruiser FJ45 Rear (all years)
1978 Toyota Land Cruiser FJ45 Rear (all years)
1979 Toyota Land Cruiser FJ45 Rear (all years)
1980 Toyota Land Cruiser FJ45 Rear (all years)
1981 Toyota Land Cruiser FJ45 Rear (all years)
1982 Toyota Land Cruiser FJ45 Rear (all years)
1983 Toyota Land Cruiser FJ45 Rear (all years)
1984 Toyota Land Cruiser FJ45 Rear (all years)
1985 Toyota Land Cruiser FJ45 Rear (all years)
1970 Toyota Land Cruiser FJ55 Rear (all years)
1971 Toyota Land Cruiser FJ55 Rear (all years)
1972 Toyota Land Cruiser FJ55 Rear (all years)
1973 Toyota Land Cruiser FJ55 Rear (all years)
1974 Toyota Land Cruiser FJ55 Rear (all years)
1975 Toyota Land Cruiser FJ55 Rear (all years)
1976 Toyota Land Cruiser FJ55 Rear (all years)
1977 Toyota Land Cruiser FJ55 Rear (all years)
1978 Toyota Land Cruiser FJ55 Rear (all years)
1979 Toyota Land Cruiser FJ55 Rear (all years)
1980 Toyota Land Cruiser FJ55 Rear (all years)
1990 Toyota Land Cruiser 70 Series – HZJ70, HZJ73, PZJ70, PZJ73
1991 Toyota Land Cruiser 70 Series – HZJ70, HZJ73, PZJ70, PZJ73
1992 Toyota Land Cruiser 70 Series – HZJ70, HZJ73, PZJ70, PZJ73
1993 Toyota Land Cruiser 70 Series – HZJ70, HZJ73, PZJ70, PZJ73
1994 Toyota Land Cruiser 70 Series – HZJ70, HZJ73, PZJ70, PZJ73
1995 Toyota Land Cruiser 70 Series – HZJ70, HZJ73, PZJ70, PZJ73
1996 Toyota Land Cruiser 70 Series – HZJ70, HZJ73, PZJ70, PZJ73
1997 Toyota Land Cruiser 70 Series – HZJ70, HZJ73, PZJ70, PZJ73
1998 Toyota Land Cruiser 70 Series – HZJ70, HZJ73, PZJ70, PZJ73
1999 Toyota Land Cruiser 70 Series – HZJ70, HZJ73, PZJ70, PZJ73
1985 Toyota 4Runner 1st Gen leaf spring rear
1986 Toyota 4Runner 1st Gen leaf spring rear
1987 Toyota 4Runner 1st Gen leaf spring rear
1988 Toyota 4Runner 1st Gen leaf spring rear
1989 Toyota 4Runner 1st Gen leaf spring rear
1986 Toyota Pickup/Hilux with IFS torsion bar suspension (comfort valved)
1987 Toyota Pickup/Hilux with IFS torsion bar suspension (comfort valved)
1988 Toyota Pickup/Hilux with IFS torsion bar suspension (comfort valved)
1989 Toyota Pickup/Hilux with IFS torsion bar suspension (comfort valved)
1990 Toyota Pickup/Hilux with IFS torsion bar suspension (comfort valved)
1991 Toyota Pickup/Hilux with IFS torsion bar suspension (comfort valved)
1992 Toyota Pickup/Hilux with IFS torsion bar suspension (comfort valved)
1993 Toyota Pickup/Hilux with IFS torsion bar suspension (comfort valved)
1994 Toyota Pickup/Hilux with IFS torsion bar suspension (comfort valved)
1995 Toyota Pickup/Hilux with IFS torsion bar suspension (comfort valved)
1996 Toyota Pickup/Hilux with IFS torsion bar suspension (comfort valved)
1997 Toyota Pickup/Hilux with IFS torsion bar suspension (comfort valved)
1998 Toyota Hilux/Pickup models with IFS torsion bar suspension (comfort valved)
1999 Toyota Hilux/Pickup models with IFS torsion bar suspension (comfort valved)
2000 Toyota Hilux/Pickup models with IFS torsion bar suspension (comfort valved)
2001 Toyota Hilux/Pickup models with IFS torsion bar suspension (comfort valved)
2002 Toyota Hilux/Pickup models with IFS torsion bar suspension (comfort valved)
2003 Toyota Hilux/Pickup models with IFS torsion bar suspension (comfort valved)
2004 Toyota Hilux/Pickup models with IFS torsion bar suspension (comfort valved)
2005 Toyota Hilux Vigo 4×4 hi-rider models (comfort valved)
2006 Toyota Hilux Vigo 4×4 hi-rider models (comfort valved)
2007 Toyota Hilux Vigo 4×4 hi-rider models (comfort valved)
2008 Toyota Hilux Vigo 4×4 hi-rider models (comfort valved)
2009 Toyota Hilux Vigo 4×4 hi-rider models (comfort valved)
2010 Toyota Hilux Vigo 4×4 hi-rider models (comfort valved)
2011 Toyota Hilux Vigo 4×4 hi-rider models (comfort valved)
2012 Toyota Hilux Vigo 4×4 hi-rider models (comfort valved)
2013 Toyota Hilux Vigo 4×4 hi-rider models (comfort valved)
2014 Toyota Hilux Vigo 4×4 hi-rider models (comfort valved)
2015 Toyota Hilux Vigo 4×4 hi-rider models (comfort valved)
1998 Toyota Tacoma 4×4 and Prerunner (comfort valved)
1999 Toyota Tacoma 4×4 and Prerunner (comfort valved)
2000 Toyota Tacoma 4×4 and Prerunner (comfort valved)
2001 Toyota Tacoma 4×4 and Prerunner (comfort valved)
2002 Toyota Tacoma 4×4 and Prerunner (comfort valved)
2003 Toyota Tacoma 4×4 and Prerunner (comfort valved)
2004 Toyota Tacoma 4×4 and Prerunner (comfort valved)
1980 Toyota Land Cruiser 60 Series (comfort valved)
1981 Toyota Land Cruiser 60 Series (comfort valved)
1982 Toyota Land Cruiser 60 Series (comfort valved)
1983 Toyota Land Cruiser 60 Series (comfort valved)
1984 Toyota Land Cruiser 60 Series (comfort valved)
1985 Toyota Land Cruiser 60 Series (comfort valved)
1986 Toyota Land Cruiser 60 Series (comfort valved)
1987 Toyota Land Cruiser 60 Series (comfort valved)
1988 Toyota Land Cruiser 60 Series (comfort valved)
1989 Toyota Land Cruiser 60 Series (comfort valved)
1990 Toyota Land Cruiser 60 Series (comfort valved)
1982 Isuzu Trooper LWB Wagons
1983 Isuzu Trooper LWB Wagons
1984 Isuzu Trooper LWB Wagons
1985 Isuzu Trooper LWB Wagons
1986 Isuzu Trooper LWB Wagons
1983 Mitsubishi Montero w/rear leaf springs
1984 Mitsubishi Montero w/rear leaf springs
1985 Mitsubishi Montero w/rear leaf springs
1986 Mitsubishi Montero w/rear leaf springs
1987 Mitsubishi Montero w/rear leaf springs
1988 Mitsubishi Montero w/rear leaf springs
1989 Mitsubishi Montero w/rear leaf springs
1990 Mitsubishi Montero w/rear leaf springs
1991 Mitsubishi Montero w/rear leaf springs
1992 Mitsubishi Montero w/rear leaf springs
1993 Mitsubishi Montero w/rear leaf springs
1994 Mitsubishi Montero w/rear leaf springs
1995 Mitsubishi Montero w/rear leaf springs
1996 Mitsubishi Montero w/rear leaf springs
1997 Mitsubishi Montero w/rear leaf springs
1998 Mitsubishi Montero w/rear leaf springs
1999 Mitsubishi Montero w/rear leaf springs
2000 Mitsubishi Montero w/rear leaf springs
1985 Nissan Frontier and Navara D21 and D22 (comfort valved)
1986 Nissan Frontier and Navara D21 and D22 (comfort valved)
1987 Nissan Frontier and Navara D21 and D22 (comfort valved)
1988 Nissan Frontier and Navara D21 and D22 (comfort valved)
1989 Nissan Frontier and Navara D21 and D22 (comfort valved)
1990 Nissan Frontier and Navara D21 and D22 (comfort valved)
1991 Nissan Frontier and Navara D21 and D22 (comfort valved)
1992 Nissan Frontier and Navara D21 and D22 (comfort valved)
1993 Nissan Frontier and Navara D21 and D22 (comfort valved)
1994 Nissan Frontier and Navara D21 and D22 (comfort valved)
1995 Nissan Frontier and Navara D21 and D22 (comfort valved)
1996 Nissan Frontier and Navara D21 and D22 (comfort valved)
1997 Nissan Frontier and Navara D21 and D22 (comfort valved)
1987 Nissan Pathfinder (comfort valved)
1988 Nissan Pathfinder (comfort valved)
1989 Nissan Pathfinder (comfort valved)
1990 Nissan Pathfinder (comfort valved)
1991 Nissan Pathfinder (comfort valved)
1992 Nissan Pathfinder (comfort valved)
1993 Nissan Pathfinder (comfort valved)
1994 Nissan Pathfinder (comfort valved)
1995 Nissan Pathfinder (comfort valved)
15 reviews for Dobinsons IMS59-50649 2.2″ IFP Rear Shocks Pair
You must be logged in to post a review.
You may also like…
-
DobinsonsOn Sale All November!!
Dobinsons SC59-002 Pair of Strut Top Plates | Tacoma 98-04 + 4Runner 96-02
- Suits Toyota Tacoma 1st Gen 1998-2004, 4Runner 3rd Gen 1996 to 2002, and Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Photo is of actual product and parts included
- Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
- Assembly Instructions
(9 reviews) - Suits Toyota Tacoma 1st Gen 1998-2004, 4Runner 3rd Gen 1996 to 2002, and Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
-
SuspensionFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons MRA59-A649 3-Way Adjustable Rear Shocks Pair for Toyota
- Suits various vehicles, list is down below
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your springs, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- 626mm extended, 400mm compressed
- 22mm / 7/8″ shaft diameter
- Full 2 year limited warranty, no set rebuild time period
- Should be run with a suspension lift of 1.75″ or more
(15 reviews)
Daniel (verified owner) –
Just what I needed.
Edward (verified owner) –
This is my go-to now for off road parts.
Justin (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Paul (verified owner) –
Very good customer service, super friendly.
Charles (verified owner) –
I received it really fast.
Justin (verified owner) –
Great description on the page, easy to understand what I was buying.
Jacob (verified owner) –
Would definitely buy from this site again.
Nathan (verified owner) –
Very fast delivery.
Ryan (verified owner) –
Great description on the page, easy to understand what I was buying.
Charles (verified owner) –
Would definitely buy from this site again.
Steven (verified owner) –
I received it really fast.
Eric (verified owner) –
5 Stars!!
Daniel (verified owner) –
Good quality, really nice.
Benjamin (verified owner) –
This is my go-to now for off road parts.
John (verified owner) –
Would definitely buy from this site again.