Your cart is currently empty!
Ford Bronco Diff Cover by ARB | 2021+
- Suits 2021+ Ford Bronco 2-door and 4-door models with Dana 44 Rear Axle
- High-tensile nodular iron structure protects differential and ring and pinion set from obstacles
- Computer-optimized, cross-brace design within the differential cover increases the structural rigidity of the axle acting as a truss
- Approach/departure angle optimized by angled exterior surface
- Prolonged carrier bearing life due to extra support to the bearing alignment
- Additional housing strength helps keep the ring and pinion gears meshing on the flat faces of the teeth, extending ring and pinion life and overall maximum load strength
- Magnet in the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage without removing the cover or draining the oil
- Low profile drain plug design resists damage from obstacles
- Combination of the high-filler point and dipstick allows the oil to be checked for water contamination without having to drain the oil
- Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles
- Cover is powder coated, CNC machined, and clear-coated for a durable, professional, long-lasting finish; all hardware is hardened and plated
- Tensile-cap screws (supplied) are recessed for protection against obstacles which might damage or loosen the screws
- Made in Red or Black, choose below
$187.00
In Stock
EAN: 9332018060846
SKU: 0750012-BRONCO
Categories: ARB, Bronco (2021-2024+), Diff Covers, Differential | Drivetrain, Performance Upgrades - Bronco 2021+, Skid Plates + Sliders - Bronco 2021+
Brand: ARB
Description
DESIGN AND DEVELOPMENT
The Ford Bronco Rear Diff Cover from ARB, ARB’s Differential Cover has been specifically engineered to protect the differential, ring and pinion set, and your ARB Air Locker® from any off-road hazards. ARB engineers have confirmed fitment of the differential cover for the 2021 Ford Bronco. The iconic Ford Bronco Rear diff covers come in red and black and are a great addition to the already extensive range which exists for the Dana, Chrysler, Ford and Chevrolet differential housings.
KEY FEATURES
• High-tensile nodular iron structure protects differential and ring and pinion set from obstacles
• Computer-optimized, cross-brace design within the differential cover increases the structural rigidity of the axle acting as a truss
• Approach/departure angle optimized by angled exterior surface
• Prolonged carrier bearing life due to extra support to the bearing alignment
• Additional housing strength helps keep the ring and pinion gears meshing on the flat faces of the teeth, extending ring and pinion life and overall maximum load strength
• High-quality and strong-neodymium magnets are used in both the drain plug and the dipstick to attract metallic wear particles eliminating premature wear
• Magnet in the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage without removing the cover or draining the oil
• Low profile drain plug design resists damage from obstacles
• Combination of the high-filler point and dipstick allows the oil to be checked for water contamination without having to drain the oil
• Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles
• Ford Bronco Diff Cover is powder coated, CNC machined, and clear-coated for a durable, professional, long lasting finish; all hardware is hardened and plated
• Tensile-cap screws (supplied) are recessed for protection against obstacles which might damage or loosen the screws
To see all Ford Bronco products that Exit Offroad offers, check it out here: Ford Bronco 2021+
Vehicle Fitment:
2021 Ford Bronco
2022 Ford Bronco
2023 Ford Bronco
2024 Ford Bronco
2025 Ford Bronco
3 reviews for Ford Bronco Diff Cover by ARB | 2021+
You must be logged in to post a review.
You may also like…
-
Bronco (2021-2024+)
King 4WD Ford Bronco Roof Rack | 4-Door Hardtop 2021-2023+
- Suits 2021-2023+ Ford Bronco 4-Door Hard Top Models (will not suit the compact SUV Bronco Sport models)
- Photos are for Illustration purposes and may change from final production model
- Mount an Awning or Rooftop Tent to your Ford Bronco
- Bolt-on Installation
- Allow for 2 to 2 ½ Hours for Installation
- No, the roof top panels cannot be removed once the roof rack has been installed
- Full Instruction Guide Included and USA-based tech support available
- Full Steel Construction, protected by a 2-stage black textured powder coat
- Heavy duty welds help keep the rack stable
- Stainless-steel hardware
- King 4WD Roof Rack comes with a 4 Year Limited Warranty. King 4WD warranty includes coverage for products with manufacture defects in materials and workmanship
(8 reviews)
Related products
-
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5421100 Skid Plate Kit | Toyota 4Runner 5th Gen (no KDSS)
- Suits all Toyota 4Runner 5th Gen models from 2010 to 2024 WITHOUT KDSS
- You must check to make sure you don’t have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(7 reviews) -
ARB
ARB 171503 Air Compressor Manifold Kit
- Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor
- Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits.
- This kit includes a manifold body with mounting bracket, BSP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit.
- This manifold permits you to lock the front and rear air lockers without needing a compressor for each.
- Manifold body with mounting bracket
- 2 x 1/8″ BSPP ports for installation of up to 2 x Air Locker solenoids
- 2 x 1/4″ NPT ports, one to be used as an input and the second could be used for installation of a pump up kit (ARB 171302)
- 1 x high temperature resistant Teflon stainless steel braided hose with heavy duty JIC4 fittings
- 2 x JIC4 – 1/4″ NPT nipples to connect the included hose to the compressor outlet and manifold kit input
- 2 x M6 hex head bolt and nylon lock-nuts for securing the manifold kit
(3 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5423010 Toyota Tacoma Skid Plate Set | 2005-2023 4×4
- Suits all Toyota Tacoma 4×4 models from 2005 to 2023 (2nd and 3rd Gen)
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(11 reviews) -
Michael (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Mark (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Aaron (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.