Your cart is currently empty!
Sale!
On Sale All November!!
Dobinsons IMS Monotube 2.2″ IFP Front Struts Pair | Ford Ranger USA Model 2019-2023
- IMS front struts for 0-3.0″ of lift for Ford Ranger 2019-2023 Models (USA Spec only)
- SOLD IN PAIRS
- Note: Photo is not of actual IMS struts. Ford Ranger IMS have a crossbar style lower front shock bush
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- 495mm extended, 350mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 186mm. See instructions on setting coil seat height on left
- Reuse OE strut top mount
- Can reuse OE coils and add lift via preload or add Dobinsons 1.75″ Light Load or 1.75″ Heavy Load Front Coils
- NOTE: Dobinsons Front Sway Bar Link Kit must be purchased to run Dobinsons IMS struts
Original price was: $650.00.$552.50Current price is: $552.50.
In Stock
SKU: IMS19-50096
Categories: Dobinsons, Exceptions, IMS Monotube, Ranger 2019+ (US Spec), Struts + Shocks - Ranger, Struts and Shocks, Suspension
Brand: Dobinsons Spring & Suspension
Description
Ford Ranger Coilover, Pair of front Dobinsons IMS19-50096 Internal Reservoir Monotube adjustable height struts (does not include coils or top mounts) for the following vehicles:
Ford Ranger USA Spec – 2019-2023
This component of the Dobinsons Ford Ranger Coilover setup have an adjustable lower coil seat to fine tune lift height or any lean in the vehicle. These do not come with coil springs or top mounts. They do come with new rubber bushings and required washers for installation. Select Dobinsons coil springs based on desired lift height and load capacity. Coil springs are all based on desired lift height, how much weight your vehicle has added over stock, and what type of ride quality you are looking for once it’s all been installed.
Dobinsons IMS Monotube Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilising the Monotube design, Dobinsons IMS Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.
The larger 50 and 60mm high flow pistons in the Ford Ranger Coilover reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.
The micro-polished, hard chromed and heat treated shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.
Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride
8 reviews for Dobinsons IMS Monotube 2.2″ IFP Front Struts Pair | Ford Ranger USA Model 2019-2023
You must be logged in to post a review.
You may also like…
-
Sale!Ranger 2019+ (US Spec)On Sale All November!!
Dobinsons C19-532 Front Coils for Ford Ranger USA Spec – 1.75″ – Pair
- Suits 2019-2022 Ford Ranger USA Spec – lifts 1.75″ with stock weight
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Sold in Pairs
- Each pair of coils lift 1.75″ over stock height
- Photo shows how they would look when installed on the IMS19-50096 Struts
(5 reviews) -
Sale!Ranger 2019+ (US Spec)On Sale All November!!
Dobinsons C19-534 Front Coils for Ford Ranger USA Spec – 1.75″ Heavy Load – Pair
- Suits 2019-2022 Ford Ranger USA Spec – lifts 1.75″ with 150-220LBS added weight
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Sold in Pairs
- Photo shows how they would look when installed on the IMS19-50096 Struts
(6 reviews) -
Sale!Ranger 2019+ (US Spec)On Sale All November!!
Dobinsons Front Sway Bar Link Set | Ford Ranger USA Model 2019-2023
- For Ford Ranger 2019-2023 USA Spec models
- Use with Dobinsons lift heights of 1.75″ or more
- Black with all hardware supplied
- Simple bolt-on design
- Fixed length, 290mm (11.42″) from center to center of ball joints
- Reduces bushing wear and corrects sway bar angle to function properly
- Prevents sway bar from contacting where it shouldn’t when running longer travel struts, like Dobinsons
- Sold as a pair, 1 needed per vehicle
(3 reviews)
Related products
-
Sale!DobinsonsOn Sale All November!!
Dobinsons GS59-221 Pair Front Struts | FJ to 09 Tacoma 05-23 4Runner 03-09 GX470
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-221 specifications: 540mm extended, 420mm compressed, 50mm body size
- Offered in Yellow or Black
(6 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(11 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
- Suits Toyota Tacoma 2005-2023
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs, top and bottom of the shackle and the fixed end
- Greasable bolts are sold in pairs, sold separately
- OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
- Tacoma poly bushing kit installation
- Link to Greasable Bolts, Click here
(14 reviews)
Nathan (verified owner) –
*****
Travis (verified owner) –
Very fast delivery.
Jose (verified owner) –
It’s exactly what I wanted.
Scott (verified owner) –
5 Stars!!
Jeremy (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Bryan (verified owner) –
Very good customer service, super friendly.
Charles (verified owner) –
Value for money, super satisfied.
Joseph (verified owner) –
Good quality, really nice.