Your cart is currently empty!
within 48 US States
SPC 25690 | Ford Bronco UCA Set 2021-2024+
- Suits Ford Bronco 2021-2024+
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- Arm will get you -2.0° to +2.00° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
$799.95
In StockDescription
Ford Bronco UCA Set – SPC 25690 Upper Control Arm Set. SPC has been at the forefront of designing and building rugged, adjustable front upper control arms for the demands of lifted vehicles. Trucks and SUVs run out of factory alignment adjustment when you install lift kits. With our patented design our upper Âcontrol arms Âprovide additional camber and caster change. Tough enough for off-road and racing applications, SPC arms are the industry standard.
SPC 25690 – Ford Bronco UCA Set – Adjustable Upper Control Arms
Suits Ford Bronco 2021 onwards
2021 Ford Bronco SPC Upper Control Arms
2022 Ford Bronco SPC Upper Control Arms
2023 Ford Bronco SPC Upper Control Arms
2024 Ford Bronco SPC Upper Control Arms
Lifted trucks lose caster which wears tires and leads to wandering at high speeds. These adjustable front upper control arms improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well. Featuring a greaseable ball joint that can be replaced and rubber isolated xAxisâ„¢ bushings, these arms are designed to correct alignment angles while maintaining factory ride quality. SPC’s tubular steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs.
With 80° of articulation in the ball joint and free pivoting cross axis bushings, SPC’s arm gives you maximum droop travel and unbound articulation.
- Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s arms have +1° of caster built into them. Using its patented ball joint design the arm will get you ±2.0° of caster and ±2.0° of camber, so you can put your alignment angles back to specification.
- Improve tire clearance: Use adjustment in the SPC arm and on the OE lower arm to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Adjustment range: Camber/Caster ±2.0°Patent No. US 7,513,514
Check out all the upper and lower, front and rear, control arms we offer for the Bronco Here
13 reviews for SPC 25690 | Ford Bronco UCA Set 2021-2024+
You must be logged in to post a review.
You may also like…
-
Bronco (2021-2024+)Black FRIDAY Sale!!
RCI Ford Bronco Aluminum Roof Rack | 4-door Hardtop 2021+
- Suits Ford Bronco 4-door Hardtop models 2021+ (will not fit soft top models or 2-doors)
- Mount anything from lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, quick-fist, RotoPax, spare tire, bike mounts, roof baskets, etc.
- Unique design allows removal of all three front roof panels with the rack in place
- Side panels feature removable filler panels for a superior finished look (simply take them off when you want to remove the roof, or leave them off if you prefer!)
- Heavy duty design will easily support roof top tents and heavy gear
- 1/4″ 5052 aluminum laser cut side panels and rear fairing, 1″x 2″ black anodized T-slot cross-bars, 1/8″ 5052 front fairing
- All aluminum components undergo a CNC deburring process to eliminate sharp edges for a high end, finished appearance
- T-Slot comes machined to accept 1/4″ nut plates and carriage bolts to simplify installation of accessories without ever having to remove bars
- Front wind fairing matches the contour of the roof and windshield for a superior fit and finish and improved aerodynamics
- Includes rubber trim and all necessary hardware for installation
- Front fairing designed to accommodate up to a 42″ light bar
- Built in side panel slots allow unlimited options for adding accessories such as handles, side lighting, awning mounts, and more
- Entirely bolt on design utilizes clamp system and OEM Ford mounting studs to secure to the truck
- Includes a filler piece for each side for a completed look that can be uninstalled in order to take off roof panels without removing the rack
- Rack is less than 4″ above highest point of the truck
- Industry standard T-slot cross-bars are compatible with hundreds of accessories
- Heavy duty black textured powdercoat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Includes black stainless steel hardware, and trim
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Weighs 54lbs
- Made in the USA
- See the Video below to show how the roof panels come off with the rack installed
(5 reviews)
John (verified owner) –
Great description on the page, easy to understand what I was buying.
Nathan (verified owner) –
Very good customer service, super friendly.
Jose (verified owner) –
Would definitely buy from this site again.
Travis (verified owner) –
It’s exactly what I wanted.
Jeffrey (verified owner) –
I received it really fast.
Anthony (verified owner) –
It’s exactly what I wanted.
Bryan (verified owner) –
Very fast delivery.
Steven (verified owner) –
Very good customer service, super friendly.
Bryan (verified owner) –
Would definitely buy from this site again.
Shawn (verified owner) –
Would definitely buy from this site again.
Jeremy (verified owner) –
Value for money, super satisfied.
Brandon (verified owner) –
Great description on the page, easy to understand what I was buying.
John (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.