Your cart is currently empty!
Sale!
On Sale All November!!
Dobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mounts
- Universal design threaded weld on bump stop can to hold a 2.2″ body bump stop
- Intended to be used with the Dobinsons HBS59-009 Hydro bumps
- 3mm walls for increased strength
- Sold as a pair
- Ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
Original price was: $400.00.$340.00Current price is: $340.00.
In Stock
SKU: AP-001
Categories: 200 Series Land Cruiser (2008-2021), 300 Series Land Cruiser (2021+), 4Runner 4th Gen (2003-2009), 4Runner 5th Gen (2010-2024), Brake Lines + Bump Stops - 4th Gen 4runner, Brake Lines + Bump Stops - 5th Gen 4Runner, Brake Lines + Bump Stops - FJ Cruiser Early, Brake Lines + Bump Stops - FJ Cruiser Late, Brake Lines + Bump Stops - Lexus GX460, Brake Lines + Bump Stops - Lexus GX470, Brake Lines + Bump Stops - Tacoma 2nd Gen, Brake Lines + Bump Stops - Tacoma 3rd Gen, Brake Lines + Bump Stops - Tundra 1st Gen, Bronco (2021-2024+), Bump Stops, Bump Stops - 200 Series, Bump Stops - Sequoia 1st Gen, Bump Stops - Tundra 2022+, Dobinsons, Early FJ Cruiser (2006-2009), Frontier D40 (2005-2021), Frontier D41 2022+, GX460 (2010-2023), GX470 (2002-2009), Hilux Revo (2016+), Hilux Vigo (2005-2015), Late FJ Cruiser (2010-2016), Pathfinder R51 (2005-2012), Performance Upgrades - 200 Series, Performance Upgrades - Sequoia 1st Gen, Performance Upgrades - Sequoia 2nd Gen, Performance Upgrades - Sequoia 3rd Gen, Performance Upgrades - Tundra 2nd Gen, Ranger 2019+ (US Spec), Sequoia 1st Gen (2001-2007), Sequoia 2nd Gen (2008-2022), Sequoia 3rd Gen (2023-2024+), Suspension, Tacoma 2nd Gen (2005-2015), Tacoma 3rd Gen (2016-2023), Tundra 1st Gen (2000-2006), Tundra 2nd Gen (2007-2021), Tundra 3rd Gen (2022-2024), Xterra
Tags: bump, bumpstop, extension, stop
Brand: Dobinsons Spring & Suspension
Description
Dobinsons weld on bump stop mounts to hold the Dobinsons hydro bumps HBS56-009.
Whenever adding bigger tires, or doing a full suspension kit on an older vehicle, the original bump stops may be damaged, missing, or just not suitable. These Dobinsons adjustable height weld on bump stop cans are the answer, allowing you to set the bump stop clearance height to the axle when combined with the Dobinsons hydro bump and setting the height properly with the threaded body.
Dobinsons Weld On Bump Stop Kits COULD Suit the following range of vehicles (welding is required):
- Lexus GX470 and GX460
- Toyota Tacoma 2nd and 3rd Gen
- Toyota 4Runner 4th and 5th Gen
- Toyota FJ Cruiser – all years
- Toyota Land Cruiser 200 series
- Toyota Land Cruiser 300 Series
- Toyota Hilux Vigo and Revo
- Toyota Tundra 1st/2nd/3rd Gen and Sequoia 1st/2nd Gen
- Toyota Tundra 2022+
- Nissan Frontier D40 and D41
- Nissan Pathfinder R51
- Hilux Vigo
- Hilux Revo
- Toyota Sequoia
- Toyota Tundra
- Ford Ranger
When driving hard off road, it’s extremely common to come across some uneven terrain too quickly and risk bottoming out the front end. The easiest damage that can happen from doing this is if you bottom out the front struts. This hard impact can have really negative long term effects on the seals in the front struts, and repeated bottoming out can lead to early failure far sooner than what they were intended to do. By setting the correct amount of bump stop clearance up front, your bump stops will properly bottom out on the front lower control arms before the strut has a chance to hit full compression, therefore saving some life out of it. These Dobinsons weld-on bump stop cans come with a threaded body for the hydraulic bump stop to go into so you can add the correct amount of additional spacing to your bump stop to compensate for the lifted height you are running at and the additional travel your struts have.  Aftermarket struts with a longer compressed length than stock should be running longer bump stops so that they bottom out at the appropriate time or if you are running over sized tires and need to stop them from making contact during up travel.
6 reviews for Dobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mounts
You must be logged in to post a review.
You may also like…
-
Sale!Bump StopsFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons Hydro 2.2″ Bump Stops – 2.2″ body x 1.8″ stroke (Pair)
- HBS56-009 – 56mm (2.2″) body | 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- No mounting cans or mounting fit kit is included (sold separately)
- Photo attached shows these bump stops installed with the weld-on mounts
(0 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTake 10% off with Coupon
Code "BLACKFRIDAY"!!Timbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2024 Tundra, 2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(12 reviews)
Related products
-
Sale!80 Series Land Cruiser (1990-1997)On Sale All November!!
Dobinsons 80 Series Rear Coils Options for Land Cruiser 80 Series 1990-1997 0-6″ Lift – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Choose what coil suits your vehicle and needs the best
- Any part number with a V in it means it’s a variable rate/progressive rate spring
- C59-221V – Stock height, variable rate
- c59-269V – 1.75″ Comfort ride spring with only stock weight (variable rate)
- C59-223V – 1.75″ lift with up to 220lbs weight (variable rate), 2.5″ with stock weight
- c59-169 – 1.75″ with up to 220lbs weight
- c59-171 – 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
- C97-147VT – 2.5″ lift with 440lbs weight (lifts more with less weight), (variable dual rate long travel)
- c59-167 – 2.5″ with up to 220lbs weight, 2″ with 440lbs weight
- c59-185 – 3″ lift with up to 220LBS weight, 2.5″ with 500LBS, 2″ with 800LBS
- C59-153 – 3″ lift with 880LBS constant rear load
- C59-613V – 3″ lift with up to 200 LBS (Flexi coils, variable rate)
- C97-145VT – 3.5″ lift with 400LBS+ heavy load rear (variable dual rate long travel)
- C59-615V – 4″ lift with up to 200 LBS (Flexi coils, variable rate)
- c59-309 – 4″ lift with 110-220lbs weight
- c59-313 – 4″ lift with 400-750lbs weight
- c59-317 – 6″ lift with stock weight
- c59-319 – 6″ lift with 200LBS constant weight
- C59-311 – 6″ lift with 880LBS constant weight
- Sold in Pairs
- Click HERE to see the FRONT coil options
- Lift heights may vary depending on the age of the vehicle, and all accessories and weight added to it
(6 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons GS59-221 Pair Front Struts | FJ to 09 Tacoma 05-23 4Runner 03-09 GX470
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-221 specifications: 540mm extended, 420mm compressed, 50mm body size
- Offered in Yellow or Black
(6 reviews)Original price was: $350.00.$297.50Current price is: $297.50. Select options This product has multiple variants. The options may be chosen on the product page -
Sale!4Runner 5th Gen (2010-2024)On Sale All November!!
Dobinsons GS59-701 Rear Shocks Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
- Pin top mount, eyelet lower mount
- Available in Yellow or Black
- Photos for illustration purposes
(6 reviews)Original price was: $310.00.$263.50Current price is: $263.50. Select options This product has multiple variants. The options may be chosen on the product page -
Sale!80 Series Land Cruiser (1990-1997)On Sale All November!!
Dobinsons 80 Series Stock Height Restoration Suspension Kit (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Restore your vehicle back to the original ride height, and bring the ride quality way up at the same time with the Dobinsons 80 Series Stock Height Suspension Kit
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Shocks, 2 Rear Shocks, and 4 Coil Springs. Add on additional parts if desired
(18 reviews)
Christopher (verified owner) –
Very fast delivery.
Joseph (verified owner) –
This is my go-to now for off road parts.
Adam (verified owner) –
5 Stars!!
Eric (verified owner) –
Would definitely buy from this site again.
Sean (verified owner) –
Would definitely buy from this site again.
Shawn (verified owner) –
Very fast delivery.