Your cart is currently empty!
Sale!
On Sale All November!!
Dobinsons Replacement Rebound Adjuster Knob
- Single replacement rebound adjuster knob for front Dobinsons MRA struts
- Sold individually
- Works on the 3-Way Adjustable Remote Reservoir Monotube struts from Dobinsons (fronts only)
- Attaches to the top center stud after the coilover assembly has been installed into the vehicle (to prevent damage)
Original price was: $25.00.$21.25Current price is: $21.25.
In Stock
SKU: REBADJ
Categories: Dobinsons, MRA Remote Resi 3-Way Adjustable Monotube, Suspension
Brand: Dobinsons Spring & Suspension
Description
Dobinsons MRA Monotube Remote Adjustable Struts, also known as MRR (Monotube Remote Reservoir) Struts, use a small knob on top of the center stud of the strut to adjust the rebound higher and lower. It’s very common for people to misplace these in shipping, or for a shop to throw them away along with the owners manual and other parts that come with the struts when they opened up. They arrive in the box in a sealed plastic bag so that they’re easy to spot, but people seem to miss them.
This is for a single replacement rebound adjuster knob to suit Dobinsons struts.
This also seals the top of the strut so that dirt and junk doesn’t get down inside the tube.
7 reviews for Dobinsons Replacement Rebound Adjuster Knob
You must be logged in to post a review.
You may also like…
-
Sale!DobinsonsOn Sale All November!!
Dobinsons IMS and MRA Adjuster Spanner Wrench
- Suits IMS or MRA front adjustable height coilovers
- For Toyota 4Runner, FJ Cruiser, and more
- For Lexus GX470 and GX460
- Made of steel, EDP coated
- A new set of IMS or MRA struts come with a wrench included
(15 reviews)
Related products
-
Sale!DobinsonsOn Sale All November!!
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these:Â https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews) -
SuspensionOn Sale All November!!ETA is late December
Dobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23
- Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
- Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered Here
(9 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
(12 reviews) -
Sale!ExceptionsOn Sale All November!!
Dobinsons Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
- Replacement Ball Joints can be ordered here
(8 reviews)
Kenneth (verified owner) –
Very fast delivery.
Jacob (verified owner) –
I received it really fast.
Joshua (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Joseph (verified owner) –
Would definitely buy from this site again.
Andrew (verified owner) –
Very good customer service, super friendly.
Andrew (verified owner) –
Just what I needed.
Shawn (verified owner) –
This is my go-to now for off road parts.