Your cart is currently empty!
RCI Low-Pro Truck Bed Bars
- Super low profile (low pro) bed rack set to mount all sort of gear or a Roof Top Tent
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Utilizing 2 crossmembers spanning the truck bed, these bed bars have a high weight capacity and provide even weight distribution on the trucks bed side rails
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Bars are 3.5″ tall from bed rail to top of bars
- Adjustable width adapts to any truck bed from 54″- 69″ width between the bed rails
- Can be positioned up to 58″ apart (front to back)
- Using these bars will minimize the aerodynamic drag normally associated with roof top tents by keeping it below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 15 minutes to install with only a few basic hand tools
- All hardware for installation is included
- INSTALL GUIDE
- Made in Loveland, Colorado USA
$379.99
In Stock
SKU: LOPRO-BEDBARS-46
Categories: 45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980), 45 Series Land Cruiser - FJ45, HJ47, BJ45, BJ46 (post 8/1980), 79 Series - FZJ79, HZJ79, HDJ79, VDJ79, GRJ79 (Pickup), Accessories, Bed Racks - Ranger, Bed Racks - Tacoma 1st Gen, Bed Racks - Tundra 1st Gen, Bumpers + Racks - Gladiator, Bumpers + Racks - Tundra 2022+, Colorado (USA Model), F-150, F-250 4x4 Super Duty 2017+, Frontier D40 (2005-2021), Frontier D41 2022+, Gladiator JT (2020-2024+), Hilux LN107 LN108 RN106 (1991-2005), Hilux Revo (2016+), Hilux Vigo (2005-2015), Pickup (1986-1988), Pickup (1988-1995), Pickup / Hilux (1979-1985), Ram 1500 2019+, Ranger 2019+ (US Spec), RCI Off Road, Roof Racks, Skid Plates, Sliders + Racks - Tacoma 2nd Gen, Skid Plates, Sliders + Racks - Tacoma 3rd Gen, Skid Plates, Sliders + Racks - Tacoma 4th Gen, Skid Plates, Sliders, Bumpers, Racks - Tundra 2nd Gen, Tacoma 1st Gen (1996-2004), Tacoma 2nd Gen (2005-2015), Tacoma 3rd Gen (2016-2023), Tacoma 4th Gen (2024+), Tundra 1st Gen (2000-2006), Tundra 2nd Gen (2007-2021), Tundra 3rd Gen (2022-2024)
Brand: RCI Offroad
Description
The RCI Bed Bars provide a low profile solution to improve aero dynamics for large gear like roof top tents while maintaining a low center of gravity.
DETAILS
The RCI Low-Pro Bed Bars provide the flexibility to mount to ANY truck bed ranging from a Chevy Colorado to a Dodge 3500. Best of all, the bed bars do it all without sacrificing strength or added weight and you can position the individual bars as far apart as desired. These bars save space and organize your truck bed by allowing all of your gear to be securely mounted with easy accessibility. Designed to accept roof top tents and other heavy gear while keeping your truck bed wide open and accessible.
KEY FEATURES
- Compatible with tonneau covers that occupy 3/4″ of the bed cap or less.
- Utilizing 2 crossmembers spanning the truck bed, these bed bars have a high weight capacity and provide even weight distribution on the trucks bed side rails
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Bars are 3.5″ tall from bed rail to top of bars
- Adjustable width adapts to any truck bed from 54″- 69″ width between the bed rails
- Can be positioned up to 58″ apart (front to back)
- Using these bars will minimize the aerodynamic drag normally associated with roof top tents by keeping it below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 15 minutes to install with only a few basic hand tools
- All hardware for installation is included
MADE IN USA
INCLUDED COMPONENTS
- Bed Bar Leg x 4
- Adjustable Crossmember x 2
- “Z” Bracket x 2
- Hardware Kit
Jeep Gladiator Truck Bed Rack, Toyota Tacoma Mid Size Short Bed Truck Bed Rack, Nissan Frontier Mid Size Short Bed Truck Bed Rack, Chevrolet Colorado Mid Size Short Bed Truck Bed Rack, GMC Canyon Mid Size Short Bed Truck Bed Rack, Nissan Navara Mid Size Short Bed Truck Bed Rack, Toyota Hilux Mid Size Short Bed Truck Bed Rack, Toyota Revo Mid Size Short Bed Truck Bed Rack, Toyota Vigo Mid Size Short Bed Truck Bed Rack.
RCI Offroad is a Colorado based company owned and operated out of Loveland, Colorado. We specialize in the manufacturing of aftermarket truck and SUV accessories. We are passionate about what we do and the products we build, which is why each of our products are carefully engineered and thoroughly tested to ensure an innovative solution that will exceed the needs of our customers.
At RCI we proudly engineer and manufacture all of our products in house at our Loveland, CO Location. This differentiates us within the industry and allows us to offer the absolute best products with extremely competitive prices.
Our in-house manufacturing processes include:
- CNC Fiber Laser Cutting of Sheet Metal
- CNC Fiber Laser Tube Cutting
- CNC Press Brake Forming
- Robotic welding
- Mig and Tig Welding of Steel and Aluminum
- CNC Tube Bending and Notching
- Fully automated powder coating line with 4 stage wash system and integrated primer coating
- In-house R&D and CAD design utilizing 3D scanning and FEA
- Warehousing, Packaging, and Shipping
- And much more!
Jeep Gladiator Bed Rack
Toyota Tacoma Bed Rack
2024 Toyota Tacoma Bed Rack
Nissan Frontier Bed Rack
Ford Ranger Bed Rack
Chevy Colorado Bed Rack
GMC Canyon Bed Rack
Ford F150 Bed Rack
Toyota Tundra Bed Rack
Additional information
| Weight | 58 lbs |
|---|---|
| Dimensions | 58 × 6 × 6 in |
5 reviews for RCI Low-Pro Truck Bed Bars
You must be logged in to post a review.
You may also like…
-
Roof Racks
RCI 12″ High HD Aluminum Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Low Profile design keeps a roof top tent lower than the roof line for better aerodynamics
- Weighs only 68 lbs compared to the steel version at 95lbs
- Built with .190″ heavy duty aluminum and 14ga steel telescoping top braces
- Mount anything from lights, Hi-lift, CO2 tank, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware for installation is included
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(6 reviews) -
Sale!Roof RacksFREE SHIPPING
within 48 US StatesOVS Cab Height Mid Size Short Bed Truck Discovery Rack
- For Short Bed Trucks Up To 5.5FT in Length with Tie Down Bed Rails
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier D21 & D40, Ford Ranger, Chevy Colorado, GMC Canyon, etc
- Heavy Duty 2” Square Top Rails are Adjustable
- No Holes to Drill Installation
- Multiple Tie Down Points
- Full Length Rails with Integrated Tie Downs
- Removable Shelf to Store Items like Propane Bottle, CO2 Tanks, Air Compressors, etc.
- Side Mounting Plates with Integrated Mole Mounting Holes to Mount Gas Cans, Water Cans, Jacks, Recovery Ramps, etc.
- Easily Mount Roof Top Tents and Awnings
- Crossbar Length 51.25”
- Accessory Plate Length 41”
- Overall Length 57”
- Overall Height 33”
- Marine Grade Stainless Steel Hardware
- 2 Stage Black Powder Coat
- T-Slot Bars are 4 Sided
- Heavy Duty Welded Corners
- Dynamic Weight Capacity: 450lbs
- Static Weight Capacity: 1350lbs
- Brand: Overland Vehicle Systems
- Limited Lifetime structural warranty and five-year finish warranty
- Installation Instructions
(8 reviews)
Related products
-
Excluded
Dobinsons Tacoma L59-110-R Leaf Springs Pair for 2005-2023 (0-220LB Load)
- Suits 2005-2023 Toyota Tacoma. Lifts dual cab short beds 2-2.25″ with 0-220LBS load, and 1″ on a Long Bed
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Click here for Extra Leaf Kit for additional load support
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
- Sold as a pair – they are not side-specific
(4 reviews) -
Tacoma 3rd Gen (2016-2023)FREE SHIPPING
within 48 US StatesDobinsons Tacoma Snorkel Kit for 2016-2023 3.5L V6
- Suits 2016-2023 4×4 Toyota Tacoma with a 3.5L V6 Gas Engine
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- FOR INSTALLATION INSTRUCTIONS, CLICK HERE
(6 reviews) -
Excluded
Dobinsons Pickup Rear Drawers Kit with Fridge Slide 39x51x10″
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Requires tonneau cover or canopy
- Universal Mount, measures 51.1 x 39.4 x 10 inches (L, W, H), requires drilling of truck bed, and custom fitting of side panels (if ordered)
- You can add a universal side wing panel kit down below, so that you can build out the edges of the drawers to the side of your bed
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Ships to the nearest freight terminal for pickup, unless home delivery is option is added below. We will be in touch to let you know the terminal location
(12 reviews) -
Dobinsons
Dobinsons PS59-4030 1/2″ Lift Alloy Strut Top Mount Spacer | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits various vehicles, as listed below
- Dobinsons PS59-4030 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Fits between the strut top mount and the chassis of the vehicle
- Note: See 2nd photo to make sure you have enough threads left to install the spacer. This vehicle came with short studs that don’t allow the spacer to be installed without changing out to thicker studs
(12 reviews)
William (verified owner) –
5 Stars!!
Richard (verified owner) –
Just what I needed.
Ryan (verified owner) –
Very good customer service, super friendly.
Shawn (verified owner) –
It’s exactly what I wanted.
Daniel (verified owner) –
This is my go-to now for off road parts.