Your cart is currently empty!
Sale!
On Sale All November!!
Dobinsons 1.5-2.0″ Lift Kit Toyota Tacoma 1998-2004 with Blocks or AAL
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- Option now to use Wheeler’s add-a-leaf kit instead of blocks if you’d prefer
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
Original price was: $930.00.$790.50Current price is: $790.50.
In StockSelect Front Coil Springs
C59-276 – 1.5″ with stock weight (Teal or Black only)
C59-134 – 1.5″ with bumper and winch
C59-134 – 2.0″ with stock weight
C59-134 – 1.5″ with bumper and winch
C59-134 – 2.0″ with stock weight
Select Front Struts
Choose from twin tube or IMS adjustable height monotube struts. IMS struts REQUIRE new UCA's to be added due to the additional length of the struts
Select Rear Shocks
Select Dobinsons Quick Ride Kit
If you'd like to use the Dobinsons block and u-bolt kit, select which one here
Select Wheeler's Add-A-Leaf Kit
If you'd prefer to use a Wheeler's Add-A-Leaf Kit instead of Dobinsons quick ride kit, select that here.
Add Strut Mounts?
Select to add new strut mounts to get all new hardware
Add Strut Assembly?
When buying the coils, struts, and new strut mounts (all 3 required), we can preassemble the front struts ready for you to bolt in
Add Front UCA's?
New UCA's will correct the geometry of the alignment by allowing addition caster and camber correction. These are recommended when running IMS front struts
Add Rear Bump Stops?
These tie into the u-bolts to replace the factory bump stop and provide a progressive rate bump, much more comfortable during a bottom-out
Add New CV Boots?
Since these trucks are pretty old now and you'll be replacing the suspension already, consider replacing the CV boots while you're in there
SKU: 1STGENTACOQRKIT
Categories: Dobinsons, Full Suspension Kits, Full Suspension Kits - Tacoma 1st Gen, Suspension, Tacoma 1st Gen (1996-2004)
Tags: 1st gen, Quick Ride, taco, tacoma
Brand: Dobinsons Spring & Suspension
Description
Dobinsons offer this complete 2.0″ suspension system for the 1998 to 2004 Toyota Tacoma 4×4 Extra/Double Cab and 4×2 Prerunner Models, designed to give a great ride front and rear, for vehicles looking for lift, with or without a heavy aftermarket bumper or winch on the front, and standard load in the rear. The kits supplies new front struts and coils, new rear shocks with 2″ lift blocks and zinc coated u-bolts. Choose the appropriate coils that suits the amount of weight you carry on the front end.
Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from our Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.
Our Twin Tube Nitrogen Gas charged shock absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Our twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.
We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.
All our coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.
1996 Toyota Tacoma Lift Kit
1997 Toyota Tacoma Lift Kit
1998 Toyota Tacoma Lift Kit
1999 Toyota Tacoma Lift Kit
2000 Toyota Tacoma Lift Kit
2001 Toyota Tacoma Lift Kit
2002 Toyota Tacoma Lift Kit
2003 Toyota Tacoma Lift Kit
2004 Toyota Tacoma Lift Kit
9 reviews for Dobinsons 1.5-2.0″ Lift Kit Toyota Tacoma 1998-2004 with Blocks or AAL
You must be logged in to post a review.
Related products
-
Sale!DobinsonsOn Sale All November!!
Dobinsons GS59-221 Pair Front Struts | FJ to 09 Tacoma 05-23 4Runner 03-09 GX470
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-221 specifications: 540mm extended, 420mm compressed, 50mm body size
- Offered in Yellow or Black
(6 reviews)Original price was: $350.00.$297.50Current price is: $297.50. Select options This product has multiple variants. The options may be chosen on the product page -
Sale!Tacoma 3rd Gen (2016-2023)On Sale All November!!
Dobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select desired lift height and additional options
(13 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons Front IFS Diff Drop Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
(17 reviews) -
SuspensionOn Sale All November!!ETA is late December
Dobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23
- Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
- Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered Here
(9 reviews)
Justin (verified owner) –
Great description on the page, easy to understand what I was buying.
Christopher (verified owner) –
Great description on the page, easy to understand what I was buying.
Michael (verified owner) –
Just what I needed.
Scott (verified owner) –
5 Stars!!
Sean (verified owner) –
Very good customer service, super friendly.
Michael (verified owner) –
Very good customer service, super friendly.
Matthew (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Jesse (verified owner) –
Great description on the page, easy to understand what I was buying.
Eric (verified owner) –
Very fast delivery.