Dobinsons twin tube strut and shock yellow shocks and teal coils

Dobinsons twin tube strut and shock yellow shocks and black coils

Dobinsons twin tube strut and shock yellow shocks and red struts

Dobinsons Twin Tube Shocks features and benefits

Dobinsons IMS Lift Kit Land Cruiser 250 2024+ (3)

FREE SHIPPING
within 48 US States

Dobinsons 2-3″ GS Lift Kit | Toyota Land Cruiser 250 2024+

Suits 2024+ Toyota Land Cruiser 250 4×4 Models
These specs are based on the 2.4L and 2.7L 4Cyl Engine models
Choose from 2, 2.5″ or 3″ of front lift, and 0.5″-2″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
Coils are specifically suited to the additional accessory load (weight) on the vehicle
Add up how much accessory weight you have on the front and then the rear, that’s your constant load
Then choose the lift height from the coils that most closely matches the added weight
Dobinsons Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel, linear rate
High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
Dobinsons have the largest selection of front and rear coils for Toyota and Lexus Vehicles and in multiple colors
Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and Front Coil Springs – Select your preferences
The more lift height you add, the more parts you need, so read the subsection headings below
Rear coils are optional in case you don’t want to lift the rear and keep the stock coils in place
Learn more about the 3 different shock types on this blog post
This kit is also available with IMS Monotube or 3-Way Adjustable Remote Resi Struts and Shocks

From $930.00

In Stock

Select Front Coil Springs

These specs are based on the 2.4L and 2.7L 4Cyl Engine models
C59-882 - 2.0" lift with stock weight
C59-816 - 2.5" lift with stock weight, or 2.0" lift with 110-220LBS added front end weight (bumper, winch, skids, etc)
C59-818 - 3.0" lift with stock weight, or 2.5" lift with 110-220LBS constant added weight

Select Front Struts

The extended travel struts must be used for 3" of lift
GS59-660 - Standard Travel for 0-2" of lift
GS59-440 - Extended Travel for 2.0-3.0"+ Lift, requires UCA's and Diff Drop Kit

Select Rear Coil Springs

Choose which coils match the lift height you want with the added weight you have on the car. Stock weight or added constant rear weight (rear bumper, etc)
C59-883V - 10mm (0.4") Lift, Variable Rate - less lift, but more load support when loaded or towing
C59-885V - 40mm (1.6") Lift, Variable Rate with 0-110lbs rear end load
C59-817V - 40mm (1.6") Lift, Variable Rate with 175-330LBS rear end constant load
C59-819V - 40mm (1.6") Lift, Variable Rate with 550-770LBS rear end constant load
C59-821V - 50mm (2.0") Lift, Variable Rate with 990-1200LBS rear end constant load

Rear Shocks

Add New Strut Mounts?

Here you can add new strut mounts and hardware, so that you can assemble the front coilovers without dismantling the stock ones

Add Strut Assembly (Labor Charge)?

If you want the coils, struts, and strut mounts preassembled prior to shipping, add it here. All 3 of those parts MUST be bought for this to be selected

Add Front UCA's?

Whenever IFS vehicles are lifted , they lack caster in the alignment. Adding new UCA's will allow the alignment to be setup much better and also allow better articulation

Add a Diff Drop Kit?

If you're running the extended travel struts, a diff drop kit must be run to prevent CV bind at full droop

Add Rear Panhard Rod?

This is recommend with a lift. It allows you to re-center the rear axle under the frame, while also increasing the strength due to the extra thickness and wall size of the rod

Add Front Bump Stops?

For those people who will be hitting it hard offroad, out in the desert, or wherever they may bottom out, a set of upgraded bump stops should be strongly considered

Add Rear Bump Stops?

If you plan to have a heavily loaded vehicle, or with a lot of rear end constant weight, adding performance bump stops will help absorb bottom-outs considerably better than stock

Add Adjustable Rear Lower Arms?

These allow the rear pinion angle of the truck to be set properly once it has been lifted. They're also much beefier than stock. Recommended for the taller lift heights

Add Adjustable Rear Upper Arms?

These allow you to adjust the pinion angle perfectly once the vehicle has been lifted. Recommended for the taller lift heights. Vehicles with headlight adjuster sensor will require an additional clamp or zip tie

Add Rear Sway Bar Links?

Height adjustable, heavy duty maintenance free OE style ends, ideal for any lift of 1" or more

SKU: LC250GSKIT Categories: 250 Series Land Cruiser (2024-2025+), Dobinsons, Exceptions, Full Suspension Kits, Full Suspension Kits - LC250, Suspension Brand: Dobinsons Spring & Suspension

Description
Reviews (0)

Description

Dobinsons GS Land Cruiser 250 Lift Kit, Dobinsons offer this complete twin tube suspension system for the 2024+ 4×4 models looking to freshen up their suspension as well as add ground clearance.

For an itemized list of all Dobinsons 2024 Land Cruiser 250 products, click here: https://exitoffroad.com/product-category/toyota/land-cruiser/250-series-land-cruiser/

Dobinsons suspension is one of the most popular and highly sought-after suspension systems offered for Toyota and Lexus 4×4’s in the USA. Why are people always looking for it? It’s because you’ll be hard pressed to find any negative reviews of the products anywhere online. Check out the web forums such as T4R.org and 4Runners.com in addition to IH8MUD.com and you’ll see plenty of reviews and customer feedback and questions for all the Toyota offerings from Dobinsons. The proof is right there, listen to what the people have to say.

Dobinsons lift kits are designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, our 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As we export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

Dobinsons Twin Tube Nitrogen Gas charged shock absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Our twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

All Dobinsons 4runner lift kit coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

**Photo for illustration purposes only

Vehicle Fitment:

2024 Toyota Land Cruiser 250 Lift Kit
2025 Toyota Land Cruiser 250 Lift Kit