Your cart is currently empty!
within 48 US States
Dobinsons MRA43-A801 2.2″ 3-Way Adjustable Rear Shocks Pair
- Suits Isuzu D-Max 2012-2020, Mitsubishi Triton & L200 2006-2022
- For 0-2″ of lift
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Shock Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- SOLD IN PAIRS
- Photo for illustration purposes
- Link to matching Front Struts
$1,150.00
In StockDescription
Dobinsons MRA43-A801 rear shocks for the Isuzu D-Max 2012-2020, Mitsubishi Triton & L200 2006-2015 and 2015-2022.
Dobinsons MRA43-A801 suitable for stock height up to 2.0″ of lift. These can be used with original springs or aftermarket. Since your vehicle is pretty old now, you could use these shocks with the original springs, but more than likely those stock springs that are so old now probably have sagged out pretty bad and aren’t holding up the weight of the vehicle properly. By adding a new pair of Dobinsons springs to these new shocks, as well as new shackles and pins, you’ll be setting up the rear end properly and bringing the ride height and ride quality back up to where it is supposed to be.
Built on the Back of the Race Winning Monotube Remote Reservoir (MRR) Shock Absorbers, Dobinsons new range of MRR Adjustable Shock Absorbers combine the best in high performance race-bred Monotube Technology, with an all new 3-way dampening adjustment system to turn your 4×4 into the ultimate off-road machine. Each component of the MRR Shock Absorber has been refined and improved to offer a higher level of ride quality, vehicle control and shock absorber performance.
The new 6063 honed Aluminum reservoir, revised light-weight floating piston, Carbon Fiber / PTFE / Disulphide composite wear band, improved 3 stage sealing system, and the ability to run lower gas pressure with the addition of the reservoir compression adjuster; have combined to provide massive reductions in shock absorber friction, resulting in an improved vehicle ride and dampening performance. The revised sealing design now provides a 3 stage FKM-HNBR shaft seal system that, when combined with the reduced operating frictions, provides a vastly increased service life with reduced wear.
The Micro Polished, Hard Chromed and Heat Treated shock shaft, revised CNC aluminum high flow race piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability. The 3 Way adjustment design reduces the main piston working load, distributing heat more evenly between the main piston and the reservoir piston for reduced operating temperatures, and allows quick and easy damping changes for the ultimate in shock tunability in varying terrain and vehicle loads, to keep you controlled and comfortable.
The Dobinsons MRA43-A801 Adjustable Remote Reservoir Lift kit utilizes large bores, combined with remote oil reservoirs, provide the perfect housing for an enormous oil capacity and surface area to resist shock fade and maintain vehicle handling.
The Dobinsons MRA43-A801 Features:
10 High Speed Compression Adjustments
20 Low Speed Compression Adjustments
15 Rebound adjustments
What this means is that you are able to tune your suspensions to accurately adjust to your current driving conditions. No Tools are needed to adjust the suspensions compression and rebound settings, although the kit does come with a handy tool to reach the adjusters better if needed. The rebound compression on struts is done at the top of the strut, and the rebound adjustment on the shocks is done at the base mount of the shock. The MRA features an easy to adjust knob on the reservoir for high and low speed compression adjustment. Due to the adjustable design there is no longer the need to choose between the firmer and comfort valved shocks, you now have the option to manage your valving on the fly, eliminating the hard choice of weather to buy your suspension based on daily comfort or having suspension heavy duty enough for your hauling needs.
To see all products that Exit Offroad offers for the D-Max, click on this link here: https://exitoffroad.com/product-category/isuzu/d-max-2012-2020/
Vehicle Fitment:
2012 Isuzu D-Max
2013 Isuzu D-Max
2014 Isuzu D-Max
2015 Isuzu D-Max
2016 Isuzu D-Max
2017 Isuzu D-Max
2018 Isuzu D-Max
2019 Isuzu D-Max
2020 Isuzu D-Max
2006 Mitsubishi Triton L200
2007 Mitsubishi Triton L200
2008 Mitsubishi Triton L200
2009 Mitsubishi Triton L200
2010 Mitsubishi Triton L200
2011 Mitsubishi Triton L200
2012 Mitsubishi Triton L200
2013 Mitsubishi Triton L200
2014 Mitsubishi Triton L200
2015 Mitsubishi Triton L200
2016 Mitsubishi Triton L200
2017 Mitsubishi Triton L200
2018 Mitsubishi Triton L200
2019 Mitsubishi Triton L200
2020 Mitsubishi Triton L200
2021 Mitsubishi Triton L200
2022 Mitsubishi Triton L200
9 reviews for Dobinsons MRA43-A801 2.2″ 3-Way Adjustable Rear Shocks Pair
You must be logged in to post a review.
You may also like…
-
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons IMS21-50470 2.2″ Monotube Struts Pair | Isuzu D-Max Mazda BT-50
- Suits Isuzu D-Max 2012-2020 and D-Max 2020-2024+, and Mazda BT-50 2020-2024+
- For 0-2″ of lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Adjustable height through fully threaded body
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height – should be set to 190mm
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
- Photo for illustration purposes
(4 reviews)
Charles (verified owner) –
This is my go-to now for off road parts.
Jason (verified owner) –
I received it really fast.
Jonathan (verified owner) –
Would definitely buy from this site again.
Charles (verified owner) –
Very good customer service, super friendly.
Travis (verified owner) –
Value for money, super satisfied.
Joseph (verified owner) –
5 Stars!!
Shawn (verified owner) –
Great description on the page, easy to understand what I was buying.
Jeffrey (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Anthony (verified owner) –
Good quality, really nice.