Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Dobinsons IMS43-50800 2.2″ Monotube Struts Pair | Mitsubishi
- Suits Mitsubishi Triton L200 2015-2023, Pajero Sport (Challenger) 2008-2016 and Pajero Sport (Challenger) 2016+
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Adjustable height through fully threaded body
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height – should be set to 215mm
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
- Photo for illustration purposes
$650.00
In StockDescription
Dobinsons IMS43-50800 front struts for Mitsubishi Triton L200 2015-2023, Pajero Sport (Challenger) 2008-2016 and Pajero Sport (Challenger) 2016+.
Dobinsons IMS43-50800 suitable for 0-2″ of lift. These can only be used with lifted aftermarket coils. Since your vehicle is pretty old now, you could use these struts with the original coils, but more than likely those stock coils that are so old now probably have sagged out pretty bad and aren’t holding up the weight of the vehicle properly. By adding a new pair of Dobinsons coils to these new struts, as well as new strut top plates/mounts, you’ll be setting up the front end properly and bringing the ride height and ride quality back up to where it is supposed to be.
Dobinsons IMS43-50800 IMS Monotube Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilising the Monotube design, Dobinsons IMS Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.
The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.
The micro-polished, hard chromed and heat treated shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.
Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride
Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
Vehicle Fitment:
2015 Mitsubishi Triton L200
2016 Mitsubishi Triton L200
2017 Mitsubishi Triton L200
2018 Mitsubishi Triton L200
2019 Mitsubishi Triton L200
2020 Mitsubishi Triton L200
2021 Mitsubishi Triton L200
2022 Mitsubishi Triton L200
2023 Mitsubishi Triton L200
2008 Mitsubishi Pajero Sport
2009 Mitsubishi Pajero Sport
2010 Mitsubishi Pajero Sport
2011 Mitsubishi Pajero Sport
2012 Mitsubishi Pajero Sport
2013 Mitsubishi Pajero Sport
2014 Mitsubishi Pajero Sport
2015 Mitsubishi Pajero Sport
2016 Mitsubishi Pajero Sport
2017 Mitsubishi Pajero Sport
2018 Mitsubishi Pajero Sport
2019 Mitsubishi Pajero Sport
2020 Mitsubishi Pajero Sport
2021 Mitsubishi Pajero Sport
2022 Mitsubishi Pajero Sport
2023 Mitsubishi Pajero Sport
You must be logged in to post a review.
Related products
-
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons GS45-912 4-5″ Front Shocks Pair for 80 Series Land Cruiser 1990-1997
- Suits: Toyota Land Cruiser 80 series and Lexus LX450 1990-1997 for 4-5″ of Lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS45-912 specifications: 670mm extended, 390mm compressed, 60mm body size
- Bump stop extensions and longer brake lines must be run with these longer shocks
- Sold in Pairs
(6 reviews) -
4Runner 3rd Gen (1996-2002)FREE SHIPPING
within 48 US StatesDobinsons GS59-225 Rear Shocks Pair | 4Runner 2nd & 3rd Gen 1990-2002
- Suits 2nd Gen 4Runner 1990-1995 (with coil spring rear end), and 3rd Gen 4Runner 1996-2002 (with coil spring rear end)
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-225 Specifications: 530mm extended, 330mm compressed, 60mm body size
- Sold in Pairs
(6 reviews) -
KL Cherokee (2014-2022) (Trailhawk)FREE SHIPPING
within 48 US StatesDobinsons GS29-430 Front Struts Pair | Jeep Cherokee KL 2014 to 2022
- Suits all models of the Jeep Cherokee KL including Trailhawk, Latitude and Sport
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Dobinsons GS29-430 Specifications: 588mm extended, 381mm compressed, 51mm body size
(6 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A700 3-Way Adjustable MRA Front Struts Pair
- Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, and 2015+ Toyota Hilux Revo, suitable for 0 – 2.5″ of lift
- The more you lift it, the less droop you will have left in the front end
- Height adjustable with a fully threaded body
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- MRA59-A700 – 560mm extended, 420mm compressed
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions on setting coil seat height
- Resi installation instructions
(18 reviews)
Reviews
There are no reviews yet.