Your cart is currently empty!
Dobinsons Heavy Duty Torsion Bar Set for Isuzu Trooper (Acura SLX) 1992 to 2002
- For all Isuzu Trooper models from 1992 to 2002
- 1220 mm total length, 30mm bar thickness
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
$530.00
In StockDescription
Dobinsons Heavy Duty Torsion Bar set for Isuzu Trooper and Acura SLX 1992 to 2002 – TB21-1549
Dobinsons Spring & Suspension’s range of heavy duty 4×4 torsion bars are manufactured from high quality micro alloy steel with a thicker bar diameter than the original vehicle torsion bars to improve performance when accessories are fitted. When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.
The torsion bars fitted to the vehicle will not withstand the additional weight placed on the vehicle and will be prone to sag and will offer poor handling and offroad performance. Dobinsons heavy duty 4×4 torsion bars feature increased spring rate (thicker bar diameter) to better handle the additional weight and provide far improved handling, ride height and offroad performance.
Dobinsons Isuzu Trooper torsion bars feature an increased bar diameter,thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.
Dobinsons Isuzu Trooper torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.
A thick durable powdercoat provides protection against corrosion.
As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their Isuzu Trooper torsion bars directionally preset and scragged to prevent sagging and breakage.
Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.
DOBINSONS RANGE OF HEAVY DUTY 4X4 TORSION BARS ARE MANUFACTURED FROM HIGH QUALITY MICRO ALLOY STEEL
When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.
INCREASED SPRING RATE
Dobinsons torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.
Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.
Directionally Preset & Scragged
As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.
Durable Powdercoat Finish
A thick durable powdercoat provides protection against corrosion.
Cold Rolled Splines
Dobinsons torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.
Related products
-
ExceptionsShips FREE !!
within 48 US StatesDobinsons MRA59-A575 3-Way Adjustable MRA Long Travel Rear Shocks
- Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 & GX460 without KDSS, Toyota Prado 120 & 150, suitable for 2 – 3.5″ of lift
- CANNOT BE USED WITH KDSS
- 3-way adjustable valving – adjust high and low speed compression and rebound
- MRA59-A575 – Specifications. 730mm extended, 443mm compressed
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Shock Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Can Use with Timbren Rear Bump Stop Kit
- Replacement Brake Lines are required: Extended Brake Lines
- Bump stops extensions or longer bump stops are required!!
- Full 2 year limited warranty, no set rebuild time period
- Now comes with a longer hose and different mounting instructions
$1,280.00 Add to cart -
Dobinsons
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
$345.00 Add to cart -
Tacoma 3rd Gen (2016-2023)
Dobinsons UB59-453-2K Rear U-Bolts for Toyota Ford Nissan Trucks (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Suits Toyota Tacoma 2005-2023 (all springs) and Nissan Frontier D40 and D41 2005-2022+ (heavy duty leaf springs), Ford Ranger 2019+
- Photos for illustration purposes. These are square at the top
- These U-bolts are 180mm in length. If you need longer, you can use the Tundra U-bolts which are 30mm longer (210mm overall), UB59-437K
$90.00 Add to cart -
Dobinsons
Dobinsons GS59-221 Pair Front Struts | FJ to 09 Tacoma 05-23 4Runner 03-09 GX470
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-221 specifications: 540mm extended, 420mm compressed, 50mm body size
- Offered in Yellow or Black
$350.00 Select options