You may be interested in…

• 

  • 
  • 
  • 

  Dobinsons

  FREE SHIPPING
  within 48 US States

  Dobinsons IMS59-50940 Rear 2.2″ IFP Shocks Pair | 2005-23 Tacoma 00-06 Tundra

  • Suits Toyota Tacoma 2nd and 3rd Gen, 2005-2023, and Toyota Tundra 1st Gen 2000-2006
  • SOLD IN PAIRS
  • Fully rebuildable and re-valvable
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Specification – 14.2″ compressed length, 24.2″ extended length
  • Full 2 year limited warranty, no set rebuild time period

  Rated 5.00 out of 5

  (12 reviews)

  $580.00 Add to cart
• 

  • 
  • 
  • 

  Upper Control Arms

  FREE SHIPPING
  within 48 US States

  Dobinsons Billet Aluminum Adjustable UCA’s Pair | 4Runner FJ Cruiser GX470 GX460

  • Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
  • Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
  • Complete kit for both left and right hand side, fully assembled with ball joints pressed in
  • High clearance design to clear pretty much every coilover size available
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • Adds 2 or 3 degrees of added caster, and caster can be further adjusted
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • Installation Instructions
  • Video on YouTube showing features and Installation
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
  • Replacement Ball Joints can be ordered here

  Rated 5.00 out of 5

  (8 reviews)

  $1,195.00 Add to cart
• 

  • 
  • 
  • 

  Exceptions

  FREE SHIPPING
  within 48 US States

  Dobinsons IMS59-50574 Extended Travel Front 2.2″ IFP Struts (2-3.5″ Lift) Pair

  • Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, suitable for 2 – 3.5″ of lift
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Height adjustable with a fully threaded body
  • Suits any lift height from 2″ to 3.5″
  • Use with lifted coils and set the preload anywhere from the minimum 213mm up to max 226mm
  • 226mm preload adds 1″ of lift to whatever coil springs you’re using
  • These do not come set to any specific preload height
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Extended Travel – 575mm fully extended, 430mm compressed
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height

  Rated 5.00 out of 5

  (14 reviews)

  $650.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23

  • Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
  • Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
  • Has 3 degrees of caster built in, no adjustability or settings required
  • Has more clearance around the ball joint than factory UCA’s for better tire clearance
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
  • Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
  • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
  • Product Video
  • Also sold without ball joints
  • Replacement Ball Joints can be ordered Here

  Rated 5.00 out of 5

  (9 reviews)

  $795.00 Add to cart
• 

  • 
  • 
  • 

  Exceptions

  FREE SHIPPING
  within 48 US States

  Dobinsons IMS59-50700 Front 2.2″ IFP Struts Pair | Toyota & Lexus (0-2.5″ Lift)

  • Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, and 2015+ Toyota Hilux Revo, suitable for 0 – 2.5″ of lift
  • The more you lift it, the less droop you will have left in the front end
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Adjustable height through fully threaded body
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • 560mm extended, 420mm compressed
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height
  • Watch the video on IMS here: https://youtu.be/Npfx40VD3kM

  Rated 5.00 out of 5

  (13 reviews)

  $650.00 Add to cart
• 

  4Runner 5th Gen (2010-2024)

  Dobinsons 15mm Rear Spacer | 4Runner FJ Cruiser Lexus GX470 GX460

  • Suits various vehicles, as listed below
  • High Quality Polyurethane, maintains height over time
  • Fits on top of OE isolator, below the frame mount
  • Sold as 1 piece
  • Lasts longer than rubber
  • Easy to add lift height to correct for vehicle lean
  • Adds 15mm (0.6″) of lift

  Rated 5.00 out of 5

  (18 reviews)

  $40.00 Add to cart
• 

  • 
  • 
  • 

  Upper Control Arms

  FREE SHIPPING
  within 48 US States

  Dobinsons Billet Aluminum Adjustable UCA’s Pair | Tacoma Hilux Fortuner 2005-23

  • Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
  • Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
  • Complete kit for both left and right hand side, fully assembled with ball joints pressed in
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • Installation Instructions
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
  • Replacement Ball Joints can be ordered Here

  Rated 5.00 out of 5

  (9 reviews)

  $1,195.00 Add to cart
• 

  • 
  • 
  • 

  Tundra 2nd Gen (2007-2021)

  FREE SHIPPING
  within 48 US States

  Dobinsons MRA59-A710 3-Way Adjustable MRA Front Struts Pair | Tundra + Sequoia

  • Suits 2007-2021 Toyota Tundra and 2008-2022 Toyota Sequoia
  • Pair of Struts only, no coils included and not preassembled
  • If you’re looking for an assembled set of coilovers, those are here: Assembled Coilovers for 2007-2021 Tundra
  • 625mm extended length, 450mm compressed length
  • Height adjustable with a fully threaded body
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
  • See attached photo for correct hose routing, can vary depending on UCA’s used
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Reservoir Brackets and Hardware and Sticker Pack
  • SOLD IN PAIRS
  • Full 2 year limited warranty, no set rebuild time period
  • Does not include coil springs – sold separately
  • Front coilover assembly instructions
  • New UCA’s are required for proper coilover and hose clearance, see all options
  • Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
  • Link to recommended 16″ coils with a 3″ inner diameter and 650LB Spring Rate
  • Link to add assembly labor charge, so that when you buy these struts and the coils, you can have them preassembled before shipping

  Rated 5.00 out of 5

  (12 reviews)

  $1,790.00 Add to cart
• 

  Dobinsons

  Dobinsons Pair of Strut Top Plates for Toyota Tundra 07-21 Sequoia 08-22

  • Made specifically for the 4×4 Toyota Tundra from 2007-2021 and Toyota Sequoia from 2008 to 2022
  • Designed to exact OE specs, using all new rubber bushes, washers and seats
  • New zinc coated hardware for corrosion resistance
  • Allows faster assembly of new components, not needing to disassemble used parts
  • Enough for 1 vehicle, sold in pairs
  • Photo for illustration purposes

  Rated 5.00 out of 5

  (7 reviews)

  $120.00 Add to cart
• 

  • 
  • 
  • 

  GX470 (2002-2009)

  FREE SHIPPING
  within 48 US States

  Dobinsons Lexus Airbag Conversion Kit for Lexus GX470 GX460

  • Suits Lexus GX470 and GX460 that came standard with airbags
  • Add this kit and a pair of coil springs to remove the factory airbags
  • GX470 rear coil springs and GX460 rear coil springs
  • Simple bolt-in design
  • High quality steel base, powder coated, with all proper grade hardware
  • OE quality upper rubber coil isolators with built-in bump stops
  • All inclusive kit, nothing else is needed except for suitable coil springs
  • ***Adds 1/2″ of lift height to whatever coils are used, due to the thickness of the base
  • If you only need replacement rubber isolators, those are sold separately here
  • Instructions, click here
  • No coil springs are included, they are sold separately

  Rated 5.00 out of 5

  (10 reviews)

  $365.00 Add to cart
• 

  • 
  • 
  • 

  Exceptions

  FREE SHIPPING
  within 48 US States

  Dobinsons IMS59-50701 2.2″ IFP Shocks Pair | Toyota and Lexus (0-3″ lift)

  • Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
  • Specifications: 598mm extended, 389mm compressed

  Rated 5.00 out of 5

  (16 reviews)

  $580.00 Add to cart
• 

  • 
  • 
  • 

  Exceptions

  FREE SHIPPING
  within 48 US States

  Dobinsons Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460

  • Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
  • Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
  • Has 3 degrees of caster built in, no adjustability or settings required
  • Has more clearance around the ball joint than factory UCA’s for better tire clearance
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
  • Works for any lift height, as factory alignment correction will be enhanced with these
  • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
  • Curved washers face outwards away from bushings during installation, per the product video
  • Product Video
  • Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
  • Also sold without ball joints
  • Replacement Ball Joints can be ordered here

  Rated 5.00 out of 5

  (8 reviews)

  $795.00 Add to cart