You may be interested in…

• 

  • 
  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons MRA59-A711 3-Way Adjustable MRA Rear Shocks Pair | Tundra 2007-2021

  • 3-way adjustable valving – Adjust high and low speed compression and rebound
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period

  Rated 5.00 out of 5

  (16 reviews)

  $1,350.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons MRA59-A940 3-Way Adjustable MRA Rear Shocks Pair

  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you
  • 10 Stage High Speed Compression – For aggressive, high speed offroading through ruts and holes
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm (2.2″) O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMITM CNC machined components for precise tolerances
  • Parker Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir, Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg, CNC TIG Precision Welded Body End Mounts
  • EDP Surface Protection, Direct Bolt-On Design
  • Fully Rebuildable Design, Full 2 year limited warranty, no set rebuild time period
  • 14.2″ compressed length, 24.2″ extended length
  • Installation Instructions
  • Works with factory brake line length and OE bump stop length, no extensions required
  • Includes reservoir brackets and hardware
  • SOLD IN PAIRS

  Rated 5.00 out of 5

  (16 reviews)

  $1,150.00 Add to cart
• 

  • 
  • 
  • 

  Dirt King Fabrication

  FREE SHIPPING
  within 48 US States

  Dirt King 2.5 Tundra DCA Remote Resi Coilovers | 2007-2021

  • Suits Toyota Tundra 2007-2021 2WD and 4WD
  • Comes preset to 2.5″ of lift
  • Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
  • Dual Compression Adjusters with 10 adjustments for each knob
  • Increased suspension travel
  • Specific valving for each vehicle providing optimal ride comfort
  • Aluminum body for cooler operation and corrosion resistance
  • Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
  • Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
  • Direct bolt-on replacement that uses factory shock mounting location
  • Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
  • Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
  • Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
  • 2.5″ hard-anodized 6061 aluminum bodies
  • Progressive valving
  • Internal floating piston
  • Induction-hardened 3/4″ shafts
  • Provides up to 3” of lift | Must be paired with aftermarket UCA
  • Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
  • What’s Included:
    • 2.5 DCA coilover shocks with remote reservoirs Pair
    • Coils installed are 16” long, 700 LBF/in Spring Rate
    • Sway bar relocation mounts with reservoir brackets
    • Spanner wrench
    • All necessary mounting hardware
    • Installation instructions
    • Installation video is down below
  • Matching Rear Shocks

  Rated 4.00 out of 5

  (4 reviews)

  $2,253.00 Add to cart
• 

  Brake Lines

  FREE SHIPPING
  within 48 US States

  Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Black)

  • American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
  • 4″ longer than stock for long travel suspension lifts
  • Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
  • Can be used with any lift height, however these are extra long for long travel rear shocks
  • Sold as a pair with new retaining clips
  • This set is BLACK in color

  Rated 5.00 out of 5

  (26 reviews)

  $120.00 Add to cart