“Dobinsons GS59-660 Front Struts Pair | Toyota Land Cruiser 250 + Lexus GX550” has been added to your cart. Continue shopping
You may be interested in…
-
TeraflexFREE SHIPPING
within 48 US StatesTeraflex JL: Rear Track Bar Axle Bracket Kit (2.5–4.5” Lift)
- The TeraFlex JL: Rear Track Bar Axle Bracket Kit corrects vehicle roll center
- Restores factory handling
- Reduces body roll on lifted JL Wrangler/Unlimited models
- Multiple mounting locations allows neutral lateral alignment of the rear axle on JL models with 2.5–4.5” lifts
- Bolt-on bracket mounts to the rear axle
- Drilling is required
- Installation Instructions
(9 reviews) -
250 Series Land Cruiser (2024-2025+)FREE SHIPPING
within 48 US StatesETA is end of JulyDobinsons IMS59-60660 2.6″ IFP Front Struts Pair
- Suits Toyota Land Cruiser 250 Series 2024+ and Lexus GX550
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on front struts
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 237mm (9.3″) from the center of the lower hole to the base notch where the coil sits
- SOLD IN PAIRS
- Shocks do not suit any models that have factory electronic adjustable Shock Absorbers
- Photos for illustration purposes only
(0 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesTeraflex JL: Progressive Bump Stop Kit – Front & Rear (0-4.5″ Lift)
- JL specific tuned for high-speed performance
- Foam Progressive Bump Stops simply pop-in to the existing factory locations
- Replaces factory foam bump stops
- Performance-tuned closed-cell nitrogen charged microcellular polyurethane technology
- Absorbs large impact energy progressively during compression to prevent bent axle tubes
- Prevents damage to suspension components, shock absorbers, and fenders
- Quiet movement and function (no pad-slap clunk)
- Maintains progressive nature during all conditions
- Will not fade or dissipate under extended heavy use
- Unaffected by temperature extremes – retains flexibility in thermal or subzero temps
- Resistant to all types of environmental conditions (mud, salt, sand, dust, etc.)
- Subzero temperature flexibility reduces fatigue
- Compatible w/ all suspension systems that retain factory axle spring mounting locations
- Maintenance-free, all composite construction
- Simple bolt-on installation
- Patented technology
- Limited lifetime warranty
- Installation Instructions
(9 reviews) -
TJ Wrangler (1996-2006)FREE SHIPPING
within 48 US StatesKing 4WD Premium TJ Wrangler Soft Top w/ Tinted Windows, w/ Upper Doors 1996-2006
- Suits 1997-2006 Jeep Wrangler TJ 2-door soft top convertibles (not LJ Unlimited)
- Includes full soft top with upper half door windows
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint on rear windows and CLEAR front door windows
- Black Diamond Fabric
- Specification: Two Layer 24oz Marine Grade – Waterproof
- Testing: CFFA, FMVSS & SAE Requirements
- Specification: UV Approved
- Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
- Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
- Testing: CFFA, FMVSS & SAE Requirements
- Zippers
- Specification: Reinforced nylon self-correcting zippers
- Testing: 50,000 Cycle Test – No bind or drag
- Velcro
- Specification: Industrial Grade Fiber
- Testing: 150 kg (330 lbs.) per square inch
- Seams
- Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
- Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
- Specification: Polyethylene and Anti Cracking
- Testing: CFFA, FMVSS & SAE Requirements
(8 reviews) -
Awning Walls + RoomsFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Nomadic 6.5FT Awning Side Shade Wall
- Awning Side Wall / Wind Break for 6.5FT Awnings
- Body Material: 600D Poly Cotton Rip Stop
- Mounting: Velcro Straps
- Can Mount to Either Side of Awning (not the end)
- Treatment: Waterproofing on Canvas
- QTY: 1
- Open Dimensions: X” x X” x X”
- Set Up Time: 1 Minute
- Warranty: 4 Year Limited Warranty
(3 reviews) -
250 Series Land Cruiser (2024-2025+)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A660 3-Way Adjustable Front Struts Pair
- Suits 2024+ Toyota Land Cruiser 250 Series and Lexus GX550
- Can be used with OEM coils or with Dobinsons lifted coils
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Installation Instructions
- Coil seat for MRA59-A660 should be set at 237mm (9.3″) from the strut bushing eye
- Photos for illustration purposes only
(0 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesIcon Tubular UCA DJ Pro Pair for 22-25 Tundra + 23-25 Sequoia
- Suits 2022-2025+ Tundra and 2023-2025+ Sequoia 4×4 Models with 1.75+ of lift over a base model
- Built in added caster for better handling on lifted vehicles
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- Serviceable dual stage pivot bushings
- CNC machined housings for bushings and Delta Joint PRO
- 1026 DOM tube construction with black powder coat finish
- Includes billet dust caps for Delta Joint PRO
- Installation Guide
- Warranty Info
(11 reviews) -
TJ Wrangler (1996-2006)FREE SHIPPING
within 48 US StatesRusty’s LJ Rocker Armor with Step | LJ Wrangler 2003-2006
- Fits: 1997-2006 Jeep Wrangler LJ (TJ Unlimited, longer wheelbase)
- Constructed of 3/16″ thick steel
- Provides true wheel-to-wheel protection of the rockers
- Incorporates a handy tubular step that eases vehicle entry and egress that is 2″ x 0.120-wall DOM tubing
- Design helps keep trees away from the body sides while having a step for easier entry
- Durable black powder coated finish
- Six stainless steel button head bolts attach the Armor to the factory rockers, while eight flush-mounted Riv-nuts secure the Armor to the bottom of the Jeep tub
- Installation Instructions
- Built in Rainbow City, Alabama, USA
(9 reviews) -
Awning Walls + RoomsFREE SHIPPING
within 48 US StatesOVS Nomadic 6.5FT Awning Shade Wall (Front)
- Mounts to the end of the awning (away from the vehicle)
- Slides into the channel at the end of the awning
- Body Material: 600D Poly Cotton Rip Stop
- Mounting: C Channel Slide
- Treatment: Waterproofing on Canvas
- QTY: 1
- Set Up Time: 1 Minute
- Warranty: 4 Year Limited Warranty
(0 reviews) -
TJ Wrangler (1996-2006)FREE SHIPPING
within 48 US StatesRusty’s TJ Rocker Armor with Step | TJ Wrangler 1997-2006
- Fits: 1997-2006 Jeep Wrangler TJ (not the LJ Unlimited)
- Constructed of 3/16″ thick steel
- Provides true wheel-to-wheel protection of the rockers
- Incorporates a handy tubular step that eases vehicle entry and egress that is 2″ x 0.120-wall DOM tubing
- Design helps keep trees away from the body sides while having a step for easier entry
- Durable black powder coated finish
- Six stainless steel button head bolts attach the Armor to the factory rockers, while eight flush-mounted Riv-nuts secure the Armor to the bottom of the Jeep tub
- Installation Instructions
- Built in Rainbow City, Alabama, USA
(6 reviews)
Cart totals
| Subtotal | $5,271.93 |
|---|---|
| Shipping |
Shipping to FL. |
| Tax | $401.04 |
| Total | $5,747.97 |
