“Dobinsons GS45-645 Rear Shocks Pair | Nissan Xterra D40 Frontier Navara” has been added to your cart. Continue shopping
You may be interested in…
-
Leaf Springs - Tacoma 1st GenOME EL122RA 2.25″ Leaf Spring for Toyota Tacoma 1998-2004
- Suits Toyota Tacoma 1st Gen 1998-2004 (will not fit the 1996 or 1997 models)
- Lifts 2.25″ over stock height
- This is the EL122RA – which is the taller side and usually mounts onto the driver’s side
- Draw-tapered and diamond cut leaves
- Bolted leaf clamps allow installation of anti-squeak nylon liners
- Fully scragged to reduce the risk of sagging
- Load tested to ensure the spring meets the required specification
- Military wrap design provides added safety
- Re-greasable nylon interleaf anti-friction pads reduce friction at the leaf tips
- Flat axle seat area allows a positive, safe axle mount and reduces spring stress
- Shot peened to reduce spring stress and increase spring life
- Two-stage leaf pack featured on most rear springs for optimum comfort
- Color: Black
- Weight: 26.2 kg
- Material: Steel
- Spring Rate: 120 / 283 lbf/in
- Eye Diameter: 40 mm (F) / 40 mm (R)
- Number Of Leaves: 5+2
- Primary Free Camber: 204 mm
- Warranty: 3 YR
- The other side leaf spring as well as Bushings and U-Bolts are sold separately
(5 reviews) -
Suspension
Dobinsons Upper Coil Spring Isolator Pair
- Adapter upper strut mount isolators to run Dobinsons C59-300, C59-302 or C59-314 coils on GS59-222, IMS59-50222 or MRA59-A222 struts on 1st Gen Tundras and Sequoias
- Not needed if using C59-344 coils
- Also, these fit the SC59-001 and SC59-002 strut mounts to replace those pieces if necessary
- Sold as a set, 2 pieces, enough for 1 vehicle
- Made of natural rubber
- Assemble To Chassis Same Way As OEM
- Maintains Factory Ride Characteristics
(4 reviews) -
Hilux Revo (2016+)
Dobinsons SK59-064 Greasable Shackle Kit Pair | Hilux Revo
- Suits 2016-2024+ Hilux Revo and Rogue
- Twin hole greasable design
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- Greasable pins for the other end of the leaf spring are available here
(6 reviews) -
Dobinsons
Dobinsons Greasable Bolt Pair | SP59-060
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
- 14mm pin/shank thickness, 103mm long not counting the head of the bolt, 116mm total length from head of bolt to end
(12 reviews) -
Leaf Springs - Tacoma 1st Gen
OME EL122RB 2.25″ Leaf Spring for Toyota Tacoma 1998-2004
- Suits Toyota Tacoma 1st Gen 1998-2004 (will not fit the 1996 or 1997 models)
- Lifts 2.25″ over stock height
- This is the EL122RB – which is the sjhorter side and usually mounts onto the passenger side
- Draw-tapered and diamond cut leaves
- Bolted leaf clamps allow installation of anti-squeak nylon liners
- Fully scragged to reduce the risk of sagging
- Load tested to ensure the spring meets the required specification
- Military wrap design provides added safety
- Re-greasable nylon interleaf anti-friction pads reduce friction at the leaf tips
- Flat axle seat area allows a positive, safe axle mount and reduces spring stress
- Shot peened to reduce spring stress and increase spring life
- Two-stage leaf pack featured on most rear springs for optimum comfort
- Color: Black
- Weight: 26.2 kg
- Material: Steel
- Spring Rate: 120 / 283 lbf/in
- Eye Diameter: 40 mm (F) / 40 mm (R)
- Number Of Leaves: 5+2
- Primary Free Camber: 189 mm
- Warranty: 3 YR
- The other side leaf spring as well as Bushings and U-Bolts are sold separately
(11 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons MRA45-A642 3-Way Adjustable Struts Pair | Xterra Frontier Pathfinder R51
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Height adjustable with a fully threaded body
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Standard coil seat height should be set to 106mm from the center of the lower bushing eye to the bottom of the coil seat
- Due to the Restricted Suspension Geometry, a Maximum of 40mm Lift is Achievable in the Front of this Vehicle.
- 395mm extended, 266mm compressed
- FITTING INSTRUCTIONS
- Instructions on setting coil seat height
(13 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable Extended Travel Struts Pair | Nissan Xterra Frontier Pathfinder R51
- MRA Extended Travel front struts for 2-3″ of lift on Nissan Frontier D40 and D41, Nissan Navara D40 and D23, Nissan Xterra 05-15, Nissan Pathfinder R51
- These extended travel struts REQUIRE aftermarket UCA’s for full travel
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Standard coil seat height should be set to 106mm from the center of the lower bushing eye to the bottom of the coil seat
- Length specs – 278mm compressed and 410mm extended
- FITTING INSTRUCTIONS
- Instructions on setting coil seat height
(12 reviews) -
Dobinsons
Dobinsons SK43-037 Greasable Shackle Kit Pair | Mitsubishi
- Suits Suits Mitsubishi Triton L200 1987-2006 and 2006-2015, and Mitsubishi Montero Pajero 1998-2005, and Mitsubishi L300 Express Van 1986-1994
- Twin hole greasable design
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- Photo for illustration purposes only
(5 reviews)
Cart totals
| Subtotal | $7,103.81 |
|---|---|
| Shipping |
Shipping to FL. |
| Tax | $568.30 |
| Total | $8,145.11 |
