Continue shopping “Dobinsons IMS Monotube IFP Rear Struts | Ford Bronco 2021+” has been added to your cart.
You may be interested in…
-
Sale!
Skid PlatesOn Sale For Memorial Day!!Rear Shock Mount Skids | 2010-2024 4Runner FJ Cruiser GX460
- Includes one pair of rear shock mount skid plates (Driver/Passenger)
- Protects low hanging shock mounts on all 2010-2024 4Runner, FJ Cruiser and Lexus GX460 models
- Includes all hardware for installation
- Product includes a heavy duty black powder coat finish
- Made in USA
Original price was: $113.99.$103.00Current price is: $103.00. Add to cart -
Rusty's Off RoadShips FREE !!
within 48 US StatesRusty’s JL Rocker Armor with Kicker Tube | JL Wrangler 4-DR 2024+
- Fits: 2024 Jeep JL Wrangler 4-Door Models (will not fit pre-2024’s or 2-Doors)
- Constructed of 2″ x 0.188-wall DOM tubing
- Fully welded for exceptional strength
- Built-in step for easing entry as well as enhancing body protection
- Bolts to the frame
- Durable Satin Black powder coated finish
- Installation Instructions
- Removal of factory side steps or rails is required
- Built in Rainbow City, Alabama, USA
$1,327.00 Add to cart -
Recovery
MAXTRAX MKII Mounting Pins (17mm bolts)
- Sold in a set of four, enough to mount one or two sets of MAXTRAX (two or four boards total).
- 17mm bolt length, see attached photo for description
- 40mm and 17mm refers to the length of bolt used to mount the pins- both the 40mm and 17mm pins will hold either one or two sets of MAXTRAX.
- Designed to mount to your MAXTRAX to wherever you can mount these pins on your vehicle
- M10 stainless bolt has a provision for a small padlock
- Please Note: Antiseize recommended on install
- SOLD AS A SET OF FOUR
$65.99 Add to cart -
Tacoma 3rd Gen (2016-2023)
Dobinsons UB59-453-2K Rear U-Bolts for Toyota Ford Nissan Trucks (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Suits Toyota Tacoma 2005-2023 (all springs) and Nissan Frontier D40 and D41 2005-2022+ (heavy duty leaf springs), Ford Ranger 2019+
- Photos for illustration purposes. These are square at the top
- These U-bolts are 180mm in length. If you need longer, you can use the Tundra U-bolts which are 30mm longer (210mm overall), UB59-437K
$90.00 Add to cart -
All Pro OffroadShips FREE !!
within 48 US StatesAll Pro Tacoma IFS Skid Plate – Aluminum Black
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 1/4-inch aluminum construction – Black Powder Coated Steel
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$440.00 Add to cart -
TJ Wrangler 1996-2006Ships FREE !!
within 48 US StatesRusty’s LJ Rocker Armor with Step | LJ Wrangler 2003-2006
- Fits: 1997-2006 Jeep Wrangler LJ (TJ Unlimited, longer wheelbase)
- Constructed of 3/16″ thick steel
- Provides true wheel-to-wheel protection of the rockers
- Incorporates a handy tubular step that eases vehicle entry and egress that is 2″ x 0.120-wall DOM tubing
- Design helps keep trees away from the body sides while having a step for easier entry
- Durable black powder coated finish
- Six stainless steel button head bolts attach the Armor to the factory rockers, while eight flush-mounted Riv-nuts secure the Armor to the bottom of the Jeep tub
- Installation Instructions
- Built in Rainbow City, Alabama, USA
$675.00 Add to cart -
Dobinsons
Dobinsons Pair of Strut Top Plates for Toyota Tundra 07-21 Sequoia 08-22
- Made specifically for the 4×4 Toyota Tundra from 2007-2021 and Toyota Sequoia from 2008 to 2022
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
$120.00 Add to cart -
Recovery
MAXTRAX Flat Rack Mounts with T-Bolts
- Mount up to 4 Maxtrax (2 Pairs) with this kit, includes mounts, hardware and pins for the Maxtrax
- Designed to mount to your MAXTRAX to your vehicles roof platform or roof rack crossbars
- Can securely attach up to four MAXTRAX MKII (MTXMPS17), 4 MAXTRAX XTREME (MTXXMPS17), or a pair of each (MTXMPSX17)
- Provides 180mm of closer adjustment or 180mm of further apart adjustment from the mounting point of the Flat Racks
- Includes the mounting option of 4 x T-Bolts (Suitable for Rola Titan roof platform, roof platforms and roof rack crossbars from most popular Roof Rack Brands)
- SOLD IN PAIRS
$149.99 Add to cart -
WarnShips FREE !!
within 48 US StatesWARN 101445 Optional Skid Plate for Elite Bumpers JL & JT
- Suits Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models) WITH a Warn Elite Bumper
- Lower Bumper Skid Cover Protects Critical Components Such As Sway bar Disconnects
- Meets The Highest Quality Standards
- Built To Match Your Exact Requirements
- Easy To Install
- Limited 1 Year Warranty
Attributes
- Location: Under Bumper Mount
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Logo: Warn Logo
- Installation Type: Bolt-On
- Includes Hardware: Yes
- Drilling Required: No
- Estimated Install Time (Hours): 0.5
$265.00 Add to cart -
All Pro OffroadShips FREE !!
within 48 US StatesAll Pro Tacoma IFS Skid Plate – Raw Aluminum
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 1/4-inch aluminum construction – Raw aluminum
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$380.00 Add to cart -
100 Series Land Cruiser IFS (1998-2007)Ships FREE !!
within 48 US StatesDobinsons Tubular UCA Kit | Land Cruiser 100 + Lexus LX470
- For Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007 models
- Not compatible with AHC, it does not have the bracket in place
- Complete kit for both left and right hand side, includes new 555 ball joints installed, OE style rubber frame bushings installed, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
$795.00 Add to cart -
All Pro OffroadShips FREE !!
within 48 US StatesAll Pro 2014-2024 4Runner Windshield Washer Bottle Skid – Powder Coated
- Great addition to your 2014-2024 4Runner if you’ve added a high clearance cut to the side and have left your washer bottle exposed
- Recommended to be added when using the All Pro High Clearance Side Supports
- Can be used with any aftermarket bumper, easily attaches to the body mount
- Made of 11 GA steel
- Comes ready to install with Black Powder Coat
- Easy bolt-on installation
- Weighs 3lbs
- BUILT 100% IN THE USA!!
- NOTE: Not compatible with Limited Edition 4Runners
- Installation Instructions
$85.00 Add to cart -
TJ Wrangler 1996-2006Ships FREE !!
within 48 US StatesRusty’s TJ Rocker Armor with Step | TJ Wrangler 1997-2006
- Fits: 1997-2006 Jeep Wrangler TJ (not the LJ Unlimited)
- Constructed of 3/16″ thick steel
- Provides true wheel-to-wheel protection of the rockers
- Incorporates a handy tubular step that eases vehicle entry and egress that is 2″ x 0.120-wall DOM tubing
- Design helps keep trees away from the body sides while having a step for easier entry
- Durable black powder coated finish
- Six stainless steel button head bolts attach the Armor to the factory rockers, while eight flush-mounted Riv-nuts secure the Armor to the bottom of the Jeep tub
- Installation Instructions
- Built in Rainbow City, Alabama, USA
$675.00 Add to cart -
Sale!WheelsShips FREE !!
within 48 US StatesWarn 106687 Diamond Cutter Wheel – 17×8.5″ 5×5 0″ Offset – Black
- Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
- Sold Individually
- Black Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Millimeter: Not Applicable
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Black
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 5×127
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 71.50
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: 5 Spoke
- With Inserts: No
- Load Capacity: 2100
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: No
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
Original price was: $352.93.$299.99Current price is: $299.99. Add to cart -
Upper Control ArmsShips FREE !!
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s | 4Runner FJ Cruiser GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
$1,195.00 Add to cart -
Upper Control ArmsShips FREE !!
within 48 US StatesDobinsons Billet Aluminum UCA’s | 200 Series Land Cruiser
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Photos for illustration purposes
$1,195.00 Add to cart -
Suspension
Dobinsons High Clearance Outer CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Complete OUTER kit includes 2 new OUTER boots, grease, and required clips – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
- Inside shape is round
- These still install the old fashioned way without custom stretch boot tools needed
$60.00 Add to cart -
Dobinsons
Dobinsons Tacoma Add-A-Leaf to L59-110-R leaf pack Kit (2 leafs + 2 pins)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Converts L59-110-R to L59-111-R
- Adds 100KG (220LB) constant load rating to existing springs
- Includes 2 x add-a-leafs and 2 x longer center pins
- Batch code must be 15134 and above
- See attached photo that shows how the clamps on your springs must look in order to fit this add-a-leaf to the pack
$140.00 Add to cart -
Tundra 3rd Gen (2022-2024)
Dobinsons Adjustable Rear Lower Control Arms Pair for Tundra + Tacoma
- Suits all 2022+ Toyota Tundra and 2024+ Toyota Tacoma
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
$445.00 Add to cart -
TimbrenShips FREE !!
within 48 US StatesTimbren ABSTORSEQ Active Off Road Rear Bump Stops | Toyota and Lexus SUV’s
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series
-
Specs:
- 2,000 lb capacity
- 4,800 lb bump load capacity
- Overall kit height = 5”
- Total deflected (compressed) height = 2.75”
- Amount of deflection (compression) = 2.25”
- Click here for instructions
- Installation video from Exit Offroad
- Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs. Timbren make 2 options, they do not include any longer bolts which may be required
- A25722-90F00 (1/2″ spacer)
- A25723-90AD00 (1″ spacer)
$269.36 Add to cart -
Tundra 2nd Gen (2007-2021)
Dobinsons Toyota Tundra Greasable Shackle Kit for 2007-2021
- Suits Toyota Tundra 2007-2021
- Recessed twin hole greasable design
- Reduces friction in bushes (included), creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- NOW Includes bushings for top and bottom of the shackles
- Use Dobinsons SP59-060 Greasable Pin Kit on the fixed ends of the leaf springs
$150.00 Add to cart -
All Pro OffroadShips FREE !!
within 48 US StatesAll Pro Tacoma IFS Skid Plate – Steel Black Coated
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Black Powder Coated Steel
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$440.00 Add to cart -
Shocks + Coilovers - Bronco 2021+Ships FREE !!
within 48 US StatesDobinsons IMS Monotube IFP Front Struts | Ford Bronco 2021+
- IMS front struts for Ford Bronco 2021-2023 Models (will not fit Bronco Sport)
- SOLD IN PAIRS
- Note: Photo is not of actual IMS struts. Ford Bronco IMS have a crossbar style lower front shock bush
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 243mm (9.55″). See instructions on setting coil seat height on left
- Reuse OE strut top mount
$650.00 Add to cart -
Camping EquipmentShips FREE !!
within 48 US StatesOVS Tilt Fridge Slide – Refrigerator Tray With Slide and Tilt
- The fridge slide allows easier access when the fridge is positioned at height.
- It also helps to clear the canopy or back doors when there isn’t space to open the lid.
- Built from both Stainless Steel and Aluminum, this tilting fridge slide offers good strength without adding excessive weight.
- 4 Tie downs points that will allow you to secure your load
- Two Stage dual powder coat with a 5 Year finish warranty
- Stainless steel runners with sealed stainless-steel bearings
- Easy to use Locking mechanisms
- Marine grade stainless steel hardware
$449.99 Add to cart -
60 62 Series Land Cruiser (1980-1989)
Dobinsons PB59-1019K Polyurethane Leaf Spring Bush Kit for Toyota
- Suits 40/45 Series and 60 Series Land Cruisers with 35mm spring eyes front and rear, and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999 and FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of leaf springs in the front or rear
- Order 2 kits to do front and rear of the vehicle
- Greasable bolts are sold in pairs, sold separately
$100.00 Add to cart -
GX470 (2002-2009)
Dobinsons 1″ to 3.5″ Lift Kit for Lexus GX470 (All Options)
- Full Dobinsons Complete Suspension kit for Lexus GX470 from 2003 to 2009, with every possible option listed on one page
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Standard Coil Springs
- Select the type of struts and shocks you want as well as all possible add-ons down below
- Choose from Dobinsons Classic Twin Tube shocks, IMS Monotube, or MRA 3-way adjustable remote resi shocks
- See note below in description about KDSS models
From $1,200.00 Select options -
Firestone
Firestone 4108 Coil-Rite Rear Helper Airbags for 2-3″ Lift | 4Runner FJ Cruiser GX470 GX460
- Suits all 3rd/4th/5th Gen 4Runners, FJ Cruiser, GX470, GX460 WITH 2-3″ of Lift
- Substitute Option – Air Lift 60769
- These are longer than the Firestone 4135 for lifted vehicles
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Fitment Notes: NOTE: Custom modifications may be required for lifted applications to ensure air bags are properly supported. If using on a lifted application, do not follow Firestone bump stop/jounce cut instructions. You will need to determine where to cut based on your lift amount (not cutting off as much depending on lift height)
- Installation Manual, Click Here
$144.12 Add to cart -
DobinsonsShips FREE !!
within 48 US StatesDobinsons Tubular UCA Kit | Land Cruiser 200 Series + Lexus LX570
- Complete assembled kit for both left and right hand side, includes new ball joints, OE style rubber frame bushings, and washers
- These arms come fully assembled with the ball joints and bushings installed
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
$795.00 Add to cart -
Dobinsons
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
$60.00 Add to cart -
DobinsonsShips FREE !!
within 48 US StatesDobinsons MRA45-A645 3-Way Adj Rear Shocks Xterra Frontier
- Suits 2005-2015 Nissan Xterra, 2005-2021 Nissan D40 Frontier and Navara with up to 2.0″ of lift
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile
- strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 565mm extended, 361mm compressed
- Sold in Pairs
$1,150.00 Add to cart -
Sale!ExceptionsShips FREE !!
within 48 US StatesWarn 106690 Jack Hammer Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal
- Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
- Sold Individually
- Gun Metal Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Millimeter: Not Applicable
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Gun Metal
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 5×127
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 71.50
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: Solid Center
- With Inserts: No
- Load Capacity: 2100
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: No
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
Original price was: $352.93.$299.99Current price is: $299.99. Add to cart -
SPC
SPC 87520 – Nissan Frontier Xterra Alignment Cam Kit (2 Pairs)
- Suits 2005+ and 2022+ Nissan Frontier and Nissan Xterra (2005-2015)
- These cams are designed to install in the lower control arms for camber and caster adjustment
- They replace the original non-adjustable lower control arm bolts
- Front Adjustment range: Camber/Caster ±2.00°
- Installation time: .3 hr/side
- The purchase includes 2 pairs, enough for 1 vehicle
- Installation Guide
$90.00 Add to cart -
Dobinsons
Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
- Greasable bolts are sold in pairs, sold separately
- OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
- Tacoma poly bushing kit installation
- Link to Greasable Bolts, Click here
$105.00 Add to cart -
Shocks - 80 Series Land CruiserShips FREE !!
within 48 US StatesDobinsons IMS59-60689 Front IMS 2.6″ Shocks | 80 Series – 31″ Extended
- 31″ long 2.6″ body shocks for the front of a Toyota Land Cruiser 80 Series
- For custom use, extreme front long travel shocks, longer than the Dobinsons 6″ lift shocks
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 790mm (31.1″) extended, 467mm (18.4″) compressed
- Bump stop extensions are required to prevent bottom outs, depending how you mount the shocks
- Photo for illustration purposes
$650.00 Add to cart -
Upper Control Arms
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
-
- 2003-2009 Toyota 4Runner
- 2010-2024 Toyota 4Runner
- 2005-2015 Toyota Tacoma
- 2016-2023 Toyota Tacoma
- 2006+ FJ Cruiser (all years)
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
- Toyota Hilux Vigo
- Toyota Hilux Revo
- Toyota Fortuner
- Toyota Prado 120
- Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
$69.00 Add to cart -
GX460 (2010-2023)
Dobinsons 1.5-3.5″ Lift Kit for Lexus GX460 2010 to 2023 (all options)
- Every suspension option from Dobinsons to lift your Lexus GX460 all on one page
- Here you can lift from a low height up to the maximum bolt-on lift height by making your selections below
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Coil Springs
- You can choose to upgrade to the higher end IMS or MRA struts and shocks on this page in the drop down menus
From $1,200.00 Select options -
Suspension
Dobinsons GS59-088 Front Shocks for Toyota 4Runner Pickup (1985 to 1995)
- Suits Toyota 4Runner 1st and 2nd Gen, 1985 to 1995 models with torsion bar suspension, and Toyota Hilux/Pickup 1998 to 2004 models with IFS torsion bar suspension
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- 367mm extended, 237mm compressed
$310.00 Add to cart -
200 Series Land Cruiser (2008-2021)Ships FREE !!
within 48 US StatesDobinsons Adjustable Rear Lower Control Arms Pair | LC200 LC300 Sequoia 23+
- Suits all 200 Series Land Cruisers from 2008-2021, 300 Series Land Cruiser, and 2023+ Toyota Sequoia
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
$445.00 Add to cart -
All Pro OffroadShips FREE !!
within 48 US StatesAll Pro 2014-2024 4Runner LoPro Front Bumper Side Supports
- Side supports are only compatible with All Pro 2014+ 4Runner Low Profile Front Bumper
- BUILT 100% IN THE USA
- 3/16″ steel construction
- Zinc plated hardware
- No Drilling or welding required
- Cutting the plastic bumper is required to install side supports
- Comes in Black Powder Coat ready to install
- Weighs 25lbs
- NOTE: Not compatible with Limited Edition 4Runners
- Installation Instructions
$520.00 Add to cart -
4Runner 3rd Gen (1996-2002)Ships FREE !!
within 48 US StatesDobinsons IMS59-50225 Rear IMS Shocks for Toyota 4Runner 1990-02
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- 530mm extended, 344mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
$580.00 Add to cart -
Rusty's Off RoadShips FREE !!
within 48 US StatesRusty’s JL Rocker Armor with Kicker Tube | JL Wrangler 4-DR 2018-2023
- Fits: 2018-2023 Jeep JL Wrangler 4-Door Models (will not fit 2024’s or 2-Doors)
- Constructed of 2″ x 0.188-wall DOM tubing
- Fully welded for exceptional strength
- Built-in step for easing entry as well as enhancing body protection
- Bolts to the frame
- Durable Satin Black powder coated finish
- Installation Instructions
- Removal of factory side steps or rails is required
- Built in Rainbow City, Alabama, USA
$1,327.00 Add to cart -
Sale!ExceptionsShips FREE !!
within 48 US StatesWarn 106688 Diamond Cutter Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal
- Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
- Sold Individually
- Gun Metal Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Millimeter: Not Applicable
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Gun Metal
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 5×127
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 71.50
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: 5 Spoke
- With Inserts: No
- Load Capacity: 2100
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: No
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
Original price was: $352.93.$299.99Current price is: $299.99. Add to cart -
Sale!WheelsShips FREE !!
within 48 US StatesWarn 104489 Jack Hammer Wheel – 17×8.5″ 6×5.5″ 0 Offset – Black
- Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 6 lugs, Uses OEM lug nuts
- Sold Individually
- Black Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: Not Applicable
- Weight: 30 LBS
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Black
- Bolt Pattern Inch: 6×5.50
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 6×139.7
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 106.10
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: Solid Center
- With Inserts: No
- Load Capacity: 2500
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: Yes
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
Original price was: $352.93.$299.99Current price is: $299.99. Add to cart -
Performance Upgrades - Tundra 2nd GenShips FREE !!
within 48 US States10% Off For Memorial Day!!
Use coupon code MEMORIALDAYPowerbrake D-Line HP Rotor and Pad Kit | Tundra 07-21 Rear
- Suits Toyota Tundra 2007-2021 Rear
- Also offered for the FRONT
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
$899.00 Add to cart -
Rusty's Off RoadShips FREE !!
within 48 US StatesRusty’s JL Side Step Rocker Armor | JL Wrangler 4-DR 2018-2023
- Fits: 2018-2023 Jeep JL Wrangler 4-Door Models (will not fit 2024’s or 2-Doors)
- Constructed of 2″ x 0.188-wall DOM tubing
- Fully welded for exceptional strength
- Built-in side step for easy entry as well as enhancing body protection
- Bolts to the frame at the chassis mounts
- Durable Satin Black powder coated finish
- Installation Instructions
- Removal of factory side steps or rails is required
- Built in Rainbow City, Alabama, USA
- Photos are of actual product. Side step is flat, not angled upward
$1,327.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons IMS59-60685 Rear IMS Shocks | Land Cruiser 80 Series (6″ lift)
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 730mm extended, 446mm compressed
$650.00 Add to cart
Cart totals
| Subtotal | $40,247.10 |
|---|---|
| Shipping |
Shipping to FL. |
| Tax | $3,018.64 |
| Total | $44,671.74 |
