You may be interested in…

• 

  • 
  • 
  • 

  Exceptions

  FREE SHIPPING
  within 48 US States

  Dobinsons IMS59-50574 Extended Travel Front 2.2″ IFP Struts (2-3.5″ Lift) Pair

  • Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, suitable for 2 – 3.5″ of lift
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Height adjustable with a fully threaded body
  • Suits any lift height from 2″ to 3.5″
  • Use with lifted coils and set the preload anywhere from the minimum 213mm up to max 226mm
  • 226mm preload adds 1″ of lift to whatever coil springs you’re using
  • These do not come set to any specific preload height
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Extended Travel – 575mm fully extended, 430mm compressed
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height

  Rated 5.00 out of 5

  (14 reviews)

  $650.00 Add to cart
• 

  • 
  • 
  • 

  Exceptions

  FREE SHIPPING
  within 48 US States

  Dobinsons IMS59-50700 Front 2.2″ IFP Struts Pair | Toyota & Lexus (0-2.5″ Lift)

  • Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, and 2015+ Toyota Hilux Revo, suitable for 0 – 2.5″ of lift
  • The more you lift it, the less droop you will have left in the front end
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Adjustable height through fully threaded body
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • 560mm extended, 420mm compressed
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height
  • Watch the video on IMS here: https://youtu.be/Npfx40VD3kM

  Rated 5.00 out of 5

  (13 reviews)

  $650.00 Add to cart
• 

  • 
  • 
  • 

  Dobinsons

  FREE SHIPPING
  within 48 US States

  Dobinsons MRA59-A222 3-Way Adjustable MRA Extended Travel Front Struts Pair

  • Suits 2001-2007 Toyota Sequoia 4×4, 1998-2004 Toyota Tacoma 4×4, 2000-2006 Toyota Tundra 4×4, 1996-2002 Toyota 4Runner 4×4
  • Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
  • Height adjustable with a fully threaded body
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • 458mm extended length, 335mm compressed
  • Standard coil seat height is 164mm
  • Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Does not include coil springs or top mounts – sold separately
  • The included droop spacer goes on top of the strut, under the first washer, if lifting more than 2.0″ (see attached photo)
  • Instructions for setting coil seat height

  Rated 5.00 out of 5

  (15 reviews)

  $1,280.00 Add to cart
• 

  • 
  • 
  • 

  4Runner 3rd Gen (1996-2002)

  FREE SHIPPING
  within 48 US States

  Dobinsons 2-2.5″ 3-Way Adjustable MRA 4Runner Coilovers for 1996-2002

  • Suits 1996-2002 Toyota 4Runner 4×4 Models
  • Looking for a quick and easy way to lift your 4Runner?  This is your answer
  • Extended Travel MRA59-A222 Coilovers – 458mm extended, 335mm compressed lengths
  • Dobinsons MRA are height adjustable by a fully threaded body
  • The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS – READY TO BOLT IN
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Photos for illustration purposes
  • Instructions for setting coil seat height
  • It’s recommended that these coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
  • Link to matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order

  Rated 5.00 out of 5

  (2 reviews)

  $1,820.00 Select options