“Bilstein 5100 Shock Kit for FJ Cruiser 2006-2009” has been added to your cart. Continue shopping
You may be interested in…
-
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Tubular UCA Pair | Toyota 4Runner FJ Cruiser Lexus GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Replacement Ball Joints can be ordered here
(8 reviews) -
Bump Stops + Spacers
Dobinsons Rear Upper Coil Isolators | 4Runner FJ Cruiser GX470 GX460
- Pair of aftermarket upper rubber coil isolators for Toyota and Lexus SUV’s
- These sit on top of the rear coil springs to properly isolate them from the frame, and also add the internal bump stop that these vehicles are intended to have
- If you have had an airbag conversion done incorrectly, or if you had to modify your isolators to add air bags and now need to go back, these are what you need
- Sits on top of rear coils
- Aftermarket version of the OEM Toyota Part Number 48302-35050
- OE quality upper rubber coil isolators with built-in bump stops
- Sold as a pair, 1 per vehicle needed
- Suits:
- 2003-2024 Toyota 4Runner
- 2007-2019 Toyota FJ Cruiser
- 2002-2009 Lexus GX 470
- 2010-2023 Lexus GX 460
(8 reviews) -
RCV AxlesFREE SHIPPING
within 48 US StatesRCV Ultimate IFS CV Axle Set | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits Toyota FJ Cruiser 2007-2014, 4Runner 2003-23, Tacoma 2005-2023, Lexus GX460 2010-2023 & Lexus GX470 2003-2009
- Standard length for use on lifted and non-lifted applications
- RCV Ultimate IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota FJ Cruiser, 4 Runner, Tacoma, Lexus GX460 and Lexus GX470 IFS axle shafts
- Ultimate IFS CV Axles provide increased strength that original equipment axle shafts just can’t match
- Even if you have big tires and big power there are no worries
- Ultimate IFS CV Axles are low maintenance, and are backed with a “No Questions Asked” limited lifetime warranty against breakage
- Warranty Form
- Our IFS CV axles meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness and control of your IFS
- The axles feature a double-offset inboard CV joint that is comprised by 1-inch balls and 300M internal components
- The outboard CVs utilize our Dana 60 architecture with combination of 4340 & 300M components optimized for maximum strength
- The center bar is 35 spline 300M, the strongest in the industry
- The RCV developed moly SPEC grease is used in the CVs to control heat build-up in even the most extreme use environments
- Black oxide coating is standard
- Sold as a pair
- Made in the USA
(9 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Engine Skid Plate – Bare Steel
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Bare Steel – needs to be painted before installation
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Engine Skid Plate – Steel Black Powder Coated
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Black Powder Coated Steel
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
Dobinsons
Dobinsons Strut Top Plates Pair | Toyota and Lexus Trucks & SUV’s
- Suits Toyota Tacoma 2005-23, Toyota 4Runner 2003-24, Toyota FJ Cruiser (all years), Toyota Prado 120, Toyota Prado 150, Toyota Hilux 2005-2023, Toyota Fortuner 2005-2024, Lexus GX470, Lexus GX460
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Product comes exactly as shown in the photo
- Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
- Can also add the labor to have struts, coils, and these top mounts assembled, click here to add that
- Installation instructions
(18 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Engine Skid Plate – Raw Aluminum
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 1/4-inch aluminum construction – Raw aluminum
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
4Runner 4th Gen (2003-2009)FREE SHIPPING
within 48 US StatesDobinsons IMS59-50220 Extended Travel Front 2.2″ IFP Struts Pair | Toyota & Lexus
- Suits 2nd and 3rd Gen Tacoma 2005-2023, 4th Gen 4Runner 2003-2009, Early FJ Cruiser 2006-2009, Lexus GX470 2003-2009
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS
- Adjustable height through fully threaded body
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
(15 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s Pair | Toyota 4Runner FJ Cruiser Lexus GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered here
(8 reviews)
Cart totals
| Subtotal | $4,011.00 |
|---|---|
| Shipping |
Shipping to FL. |
| Route Shipping Protection | $100.28 |
| Tax | $303.09 |
| Total | $4,444.37 |
