You may be interested in…

• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons IMS59-60710 IFP Front Struts for Toyota Tundra and Sequoia

  • For 1.75-3.0″ of lift
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Features clip adjustment levels for fine tuning of lift height
  • 4 Clip height settings. Lowest height is stock/OE height.  Each clip height adds approximately 1/2″ of lift.  Use clip heights to fine tune lift height or offset for vehicle lean
  • Recommended to run with Dobinsons coils.  OE coils may contact the thicker shock body
  • TRD Pro models should start at the 2nd clip up to add 1/2″ of coil seat height, which equals the 1″ of lift the PRO’s come with when new
  • ASSEMBLY INSTRUCTIONS
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • 615mm extended, 445mm compressed lengths
  • Full 2 year limited warranty, no set rebuild time period
  • If you are buying parts separately (coils and struts) and want them preassembled prior to shipping, add this product to your cart also

  $720.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Warn 106690 Jack Hammer Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Gun Metal Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Gun Metal
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: Solid Center
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• 

  • 
  • 
  • 

  Exceptions

  Dobinsons Rear Dual Roller Drawer Kit – 36 x 40 x 10 inches

  • 1.6mm Zinc Plated Robust Steel Construction
  • 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
  • Built in Heavy Duty Fridge Slide on left side
  • 8 x Heavy Duty Stainless Steel Tie Down Points
  • Universal Mount, measures 36″ Long x 40″ Wide x 10″ High, requires drilling
  • Aluminum Edging Protection
  • Heavy duty lockable latches
  • Marine Carpet
  • Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
  • Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected.  We will be in touch with that delivery address

  $1,465.00 Select options
• 

  • 
  • 
  • 

  Factor 55

  Ships FREE !!
  within 48 US States

  10% Off For Memorial Day!!
  Use coupon code MEMORIALDAY

  Factor 55 FlatLink Multimount

  • Multiple shackle interface for bridle and off-camber towing
  • Lightweight – Precision CNC machined 6000 series aluminum
  • No splicing required – titanium double shear pin design
  • Designed for both steel cables and synthetic winch ropes
  • Integrated EPDM rubber pads for fairlead protection
  • Foldable – 1.75” thick (Compatible with all fairlead license plate mounting brackets)
  • Oval opening connects to either the pin or bow end of common ¾” screw pin shackles and pin ends of 7/8” and 1” screw pin shackles
  • 5/8” diameter 6AI-4V titanium double shear pin
  • For rope and cable diameters up to 3/8’’
  • Fits over most OEM tow hooks
  • 2” thick when folded flat
  • Max load: 16,000 lbs., Ultimate Strength: 40,000 pounds
  • Weight: 32 oz
  • MADE IN USA

  $229.00 Select options
• 

  • 
  • 
  • 

  Factor 55

  Ships FREE !!
  within 48 US States

  10% Off For Memorial Day!!
  Use coupon code MEMORIALDAY

  Factor 55 ProLink Shackle Mount

  • 5/8 inch diameter 6Al-4V titanium double shear pin and internal snap ring for an ultra-secure connection
  • EPDM rubber guards are attached with four barbed tips and protects fairleads and prevents rattling, also protects alloy fairleads and cushions line stowage
  • Precision machined from 6061-T6 Kaiser Aluminum round bar
  • 1.2 inch shackle tab thickness reduces “shackle rattle”
  • Works with steel or synthetic rope up to 3/8” diameter and eyes equipped with standard or tube thimbles up to 3/8” diameters.
  • The rope eye is retained in the ProLink with a 5/8”-diameter grade 6AI-4V grade V
  • Stress analyzed using COSMOS FEA and destructively tested for confirmation
  • Max load rating: 16,000 lbs.
  • Weight: 24 oz
  • Engineered, Tested, and Made in USA. Patent pending

  $157.00 Select options
• 

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Back in Stock Now!!

  Dobinsons IMS59-50700 Front IMS Struts | 2010+ 4Runner FJ Cruiser GX460 (0-2.5″ Lift)

  • Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, and 2015+ Toyota Hilux Revo, suitable for 0 – 2.5″ of lift
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • 560mm extended, 420mm compressed
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height
  • Watch the video on IMS here: https://youtu.be/Npfx40VD3kM

  $650.00 Add to cart
• 

  • 
  • 
  • 

  Excluded

  Dobinsons Pickup Rear Drawers Kit with Fridge Slide Universal Fit

  • 1.6mm Zinc Plated Robust Steel Construction
  • 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
  • Built in Heavy Duty Fridge Slide
  • 8 x Heavy Duty Stainless Steel Tie Down Points
  • Requires tonneau cover or canopy
  • Universal Mount, measures 51.1 x 39.4 x 10 inches (L, W, H), requires drilling of truck bed, and custom fitting of side panels (if ordered)
  • You can add a universal side wing panel kit down below, so that you can build out the edges of the drawers to the side of your bed
  • Aluminum Edging Protection
  • Heavy duty lockable latches
  • Marine Carpet
  • Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
  • Ships to the nearest freight terminal for pickup, unless home delivery is option is added below.  We will be in touch to let you know the terminal location

  From $1,845.00 Select options
• 

  • 
  • 
  • 

  Upper Control Arms

  Ships FREE !!
  within 48 US States

  Dobinsons Billet Aluminum Adjustable UCA’s | Toyota Tacoma 2005-23

  • Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
  • Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
  • Complete kit for both left and right hand side
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • Installation Instructions
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer

  $1,195.00 Add to cart
• 

  • 
  • 
  • 

  Skid Plates + Sliders - 5th Gen 4Runner

  Ships FREE !!
  within 48 US States

  All Pro 5th Gen 4Runner IFS Skid Plate – Aluminum Black

  • Suits 2010-2024 Toyota 4Runner 5th Gen
  • Covers from the front bumper down to the first cross member
  • 1/4-inch thick 5052 Aluminum – Black Powder Coated
  • Optimal balance between strength and weight
  • At only 22 lbs, it’s half the weight of similar steel undercarriage protection
  • Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
  • Skidplate not currently compatible with a diff drop kit – you would have to space it down
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Compatible with All-Pro 2010+ 4Runner Front Bumpers
  • Not tested with KDSS Vehicles
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Installation Instructions

  $440.00 Add to cart
• 

  • 
  • 
  • 

  Factor 55

  Ships FREE !!
  within 48 US States

  10% Off For Memorial Day!!
  Use coupon code MEMORIALDAY

  Factor 55 FlatLink Shackle Mount

  • Double-shear pin and internal snap ring for an ultrasecure connection
  • EPDM rubber guards are attached with four barbed tips; it cushions line stowage, protects fairleads and prevents rattling
  • Precision machined from 6000 series aluminum
  • Easy to install, FlatLink can be used with steel or synthetic winch lines up to 3/8” in diameter and works with common 3/4” shackles (pin and bow end) or soft shackles up to 3/4”
  • The rope eye is retained in the FlatLink with a 5/8” diameter 6AI-4V grade V titanium
  • Less than 1.75” of thick, when folded flat
  •  Max load rating: 16,000lbs, Ultimate failure : greater than 40,000lbs
  • Weight: 23 oz.
  • Engineered, Tested, and Made in USA. Patent pending

  $146.00 Select options
• 

  • 
  • 
  • 

  Suspension

  Dobinsons High Clearance Inner CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460

  • Complete INNER kit includes 2 new INNER boots, grease, and required clips – For 1 vehicle
  • If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
  • Made of high quality rubber for maximum life
  • Great for lifted SUV’s and Trucks with high CV angles
  • Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
  • Interior mold is hex shaped
  • These still install the old fashioned way without custom stretch boot tools needed

  $60.00 Add to cart
• 

  Dobinsons

  Dobinsons Big Bore Steering Damper for Jeep Cherokee Wrangler Grand Cherokee, models XJ YJ TJ ZJ WJ JK

  • Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
  • Cellular Foam Cell Insert, Teflon Piston Rings
  • Excellent Viscosity Temperature Performance
  • NOK Triple Lip Oil Seals, High Quality Fuchs German Oil
  • Replaces OE steering damper, bolts into place. Can be used with or without a lift.

  $135.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Wheels

  Ships FREE !!
  within 48 US States

  Warn 106687 Diamond Cutter Wheel – 17×8.5″ 5×5 0″ Offset – Black

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Black Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Black
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: 5 Spoke
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• Sale!

  

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Warn 106688 Diamond Cutter Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Gun Metal Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Gun Metal
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: 5 Spoke
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• 

  On Backorder

  • 
  • 
  • 

  Tacoma 3rd Gen (2016-2023)

  Ships FREE !!
  within 48 US States

  Dirt King Performance Tacoma Lower Control Arms for 2016-2023

  • Suits 2016-2023 3rd Gen Toyota Tacoma 2WD / 4WD
  • CAD designed
    
  • Formed steel bushing gussets
  • Internally ribbed with extrusions for weight reduction
  • Preassembled for fast installation
  • Grease fitting ports for easy servicing
  • Zinc plated components for corrosion resistance
  • Bump stop plating
  • Limit strap tabbing
  • Bypass shock tabbing
  • Professionally MIG welded
  • Proudly made in the USA

  $1,849.00 Add to cart
• 

  • 
  • 
  • 

  Factor 55

  Ships FREE !!
  within 48 US States

  10% Off For Memorial Day!!
  Use coupon code MEMORIALDAY

  Factor 55 ProLink E (Expert) Shackle Mount

  • Unique shape offers increased versatility allowing for increased rigging options
  • 5/8” diameter 6AI-4V titanium double-shear pin and internal snap ring for an ultra-secure connection
  • EPDM rubber guards are attached with four barbed tips; it cushions line stowage, protects fairleads and prevents rattling
  • Precision machined from 6000 series aluminum
  • Connects to either the pin or bow end of common ¾” screw pin shackles, compatible with steel or synthetic rope up to 3/8”
  • Connects to the pin ends of 7/8” and 1” screw pin shackles
  • Fits over most OEM tow hooks
  • Maximum load: 16,000 lbs, Ultimate Strength: 40,000 lbs
  • Weight: 32 oz
  • Engineered, Tested, and Made in USA. Patent pending

  $209.00 Select options
• 

  Dobinsons

  Dobinsons Add-A-Leaf Center Bolt Pin (Single) (10-75)

  • Used in place of original leaf bolt when adding a leaf
  • Fits L59-111-R-R3 &  L59-112-R-R5 ONLY
  • Sold individually

  • Made from the highest quality raw materials to give years of life under the harshest conditions
  • Over 60 years of leaf spring design and manufacturing
  • Requires lifted leaf springs to ensure proper fitment

  $5.00 Add to cart
• 

  SPC

  SPC 87520 – Nissan Frontier Xterra Alignment Cam Kit (2 Pairs)

  • Suits 2005+ and 2022+ Nissan Frontier and Nissan Xterra (2005-2015)
  • These cams are designed to install in the lower control arms for camber and caster adjustment
  • They replace the original non-adjustable lower control arm bolts
  • Front Adjustment range: Camber/Caster ±2.00°
  • Installation time: .3 hr/side
  • The purchase includes 2 pairs, enough for 1 vehicle
  • Installation Guide

  $90.00 Add to cart
• 

  • 
  • 

  Timbren

  Ships FREE !!
  within 48 US States

  Timbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus

  • Suits 2000-2024 Tundra,  2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
  • Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all.  Inspect your vehicle before ordering
  • Maintain Full Axle Travel
  • Smooth Axle Engagement and Disengagement
  • Enhance Suspension Performance
  • Progressive Spring Rate
  • Absorbs Energy and Cushions Road Shocks
  • Stronger Than OEM Bumpstops
  • Easy Installation – Installation Video
  • Satisfaction Guarantee
  • Lifetime Warranty
  • Click here for instructions

  $269.36 Add to cart
• 

  • 
  • 
  • 

  Skid Plates + Sliders - 5th Gen 4Runner

  Ships FREE !!
  within 48 US States

  All Pro 5th Gen 4Runner IFS Skid Plate – Bare Aluminum

  • Suits 2010-2024 Toyota 4Runner 5th Gen
  • Covers from the front bumper down to the first cross member
  • 1/4-inch thick 5052 Aluminum – Bare
  • Optimal balance between strength and weight
  • At only 22 lbs, it’s half the weight of similar steel undercarriage protection
  • Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
  • Skidplate not currently compatible with a diff drop kit – you would have to space it down
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Compatible with All-Pro 2010+ 4Runner Front Bumpers
  • Not tested with KDSS Vehicles
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Installation Instructions

  $380.00 Add to cart
• 

  • 
  • 
  • 

  Accessories

  Dobinsons Single Drawer – Universal Mount – Medium Size

  • Measures 900mm long x 500mm wide x 275mm high, 75 LBS dry weight
  • 1.6mm Zinc Plated Robust Steel Construction
  • 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
  • 4 x Heavy Duty Stainless Steel Tie Down Points
  • Aluminum Edging Protection, Heavy duty lockable latch 
  • Not compatible with 3rd row seat installed.
  • Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
  • Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected.  We will be in touch with that delivery address.  Ground shipping isn’t available due to potential product damage

  $800.00 Select options
• Sale!

  

  Wheels

  Warn 106684 5 Lug Epic Wheel Hubs Center Cap – Grey

  • Suits Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • Grey Finish
  • Expertly Made From Premium Materials
  • Meets The Highest Quality Standards
  • ISO 9001: 2015, ISO 14001: 2015 CERTIFIED
  • Easy To Install
  • Limited 90 Day Supplier Warranty
  • Wheel Series Compatibility: Moonsault/ Diamond Cutter And Jack Hammer Series Wheels
  • Bolt Pattern (MM): 5×127
  • Installation Type: Bolt-On
  • Style: Closed
  • Color: Grey
  • Quantity: Single
  • Bolt Pattern (IN): 5×5.00
  • Material: Plastic
  • Estimated Install Time (Hours): 0.25

  $27.29 Original price was: $27.29.$24.00Current price is: $24.00. Add to cart
• 

  • 
  • 
  • 

  Tacoma 2nd Gen (2005-2015)

  Ships FREE !!
  within 48 US States

  Dirt King Performance Tacoma Lower Control Arms for 2005-2015

  • Suits 2005-2015 2nd Gen Toyota Tacoma 2WD / 4WD
  • CAD designed
    
  • Formed steel bushing gussets
  • Internally ribbed with extrusions for weight reduction
  • Preassembled for fast installation
  • Grease fitting ports for easy servicing
  • Zinc plated components for corrosion resistance
  • Bump stop plating
  • Limit strap tabbing
  • Bypass shock tabbing
  • Professionally MIG welded
  • Proudly made in the USA

  $1,849.00 Add to cart
• 

  • 
  • 
  • 

  Excluded

  Dobinsons Single Drawer – Universal Mount – Large Size

  • Measures 990mm long x 535mm wide x 275mm high, 80 LBS dry weight
  • 1.6mm Zinc Plated Robust Steel Construction
  • 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
  • 4 x Heavy Duty Stainless Steel Tie Down Points
  • Aluminum Edging Protection, Heavy duty lockable latch 
  • Not compatible with 3rd row seat installed.
  • Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
  • Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
  • Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected.  We will be in touch with that delivery address
  • Regular Ground shipping isn’t available due to potential product damage

  $800.00 Select options
• 

  • 
  • 
  • 

  Skid Plates + Sliders - 5th Gen 4Runner

  Ships FREE !!
  within 48 US States

  All Pro 5th Gen 4Runner IFS Skid Plate – Bare Steel

  • Suits 2010-2024 Toyota 4Runner 5th Gen
  • Covers from the front bumper down to the first cross member
  • 3/16-inch steel – Bare Steel – needs to be painted before installation
  • Optimal balance between strength and weight
  • Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
  • Skidplate not currently compatible with a diff drop kit – you would have to space it down
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Compatible with All-Pro 2010+ 4Runner Front Bumpers
  • Not tested with KDSS Vehicles
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Installation Instructions

  $380.00 Add to cart
• 

  Tacoma 3rd Gen (2016-2023)

  Dobinsons Tacoma L59-112-R Heavy Duty Leaf Springs Pair for 2005-2023 (800-1200LBS)

  • Suits Toyota Tacoma 2005-2023, lifts 2-2.25″ with at least 800LBS of constant load on the rear end
  • Sold in pairs
  • Each pack has 7 leaves
  • Made from the highest quality raw materials to give years of life under the harshest conditions
  • Over 60 years of leaf spring design and manufacturing
  • Design features include Drawn, tapered and thinned leaf ends
  • Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
  • Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
  • Click here for Extra Leaf Kit for additional load support
  • These are leaf springs ONLY and don’t come with bushings or any other parts.  Scroll down for add-ons that go with these springs

  $870.00 Add to cart
• 

  • 
  • 
  • 

  Rear Drawers

  Dobinsons Rear Dual Roller Drawer Kit – 39 x 42 x 10 inches

  • 1.6mm Zinc Plated Robust Steel Construction
  • 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
  • Built in Heavy Duty Fridge Slide
  • 8 x Heavy Duty Stainless Steel Tie Down Points
  • Universal Mount, measures 39 x 42 x 10 inches (L, W, H)
  • Aluminum Edging Protection
  • Heavy duty lockable latches
  • Marine Carpet
  • Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
  • Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected.  We will be in touch with that delivery address
  • Photos for illustration purposes and may not be actual size of product for this product page
  • Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer

  $1,465.00 Select options
• 

  • 
  • 
  • 

  Recovery

  MAXTRAX Flat Rack Mounts with T-Bolts

  • Mount up to 4 Maxtrax (2 Pairs) with this kit, includes mounts, hardware and pins for the Maxtrax
  • Designed to mount to your MAXTRAX to your vehicles roof platform or roof rack crossbars
  • Can securely attach up to four MAXTRAX MKII (MTXMPS17), 4 MAXTRAX XTREME (MTXXMPS17), or a pair of each (MTXMPSX17)
  • Provides 180mm of closer adjustment or 180mm of further apart adjustment from the mounting point of the Flat Racks
  • Includes the mounting option of 4 x T-Bolts (Suitable for Rola Titan roof platform, roof platforms and roof rack crossbars from most popular Roof Rack Brands)
  • SOLD IN PAIRS

  $149.99 Add to cart
• 

  On Backorder

  • 
  • 

  4Runner 5th Gen (2010-2024)

  Dobinsons GS59-700 Front Struts | FJ Cruiser 4Runner GX460 2010-2024

  • Dobinsons GS59-700 front struts for 2010-2016 Toyota FJ Cruiser, 2010-2024 Toyota 4Runner, Lexus GX460, and Prado 150 – twin tube design
  • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
  • Superior Design, thicker walls, longer travel
  • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
  • Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
  • Matched to compliment Dobinsons Complete Suspension Systems
  • Dobinsons GS59-700 Specifications: 555mm extended, 432mm compressed, 50mm body size

  $350.00 Add to cart
• 

  • 
  • 
  • 

  Factor 55

  Ships FREE !!
  within 48 US States

  10% Off For Memorial Day!!
  Use coupon code MEMORIALDAY

  Factor 55 FlatLink E (Expert) Shackle Mount

  • Large pear-shaped shackle mounting hole allows for attachment to either the pin or bow end of common screw pin shackles, as well as common OEM recovery points.
  • Easy to install, FlatLink can be used with steel or synthetic winch lines up to 3/8” in diameter
  • The rope eye is retained in the FlatLink with a 5/8” diameter 6AI-4V grade V titanium
  • Precision machined from 6000 series billet aluminum, Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray finish.
  • Works with common 3/4” shackles (pin and bow end), soft shackles up to 3/4”
  • Less than 1.75” of thick, when folded flat
  • Maximum Load: 16,000 lbs., Ultimate failure : greater than 40,000lbs
  • Compatible with all roller fairlead license plate mounting brackets
  • EPDM Rubber Guard protects alloy fairleads and cushions line stowage, and eliminates hook rattle and fairlead damage
  • Simple snap ring removal for shear pin
  • Weight: 26 oz.

  $167.00 Select options
• 

  Dobinsons

  Dobinsons Strut Top Plates Pair | Tacoma 05-23 4Runner 03-24 FJ Cruiser GX470 GX460

  • Suits Toyota Tacoma 2005-23, Toyota 4Runner 2003-24, Toyota FJ Cruiser (all years), Toyota Prado 120, Toyota Prado 150, Toyota Hilux 2005-2023, Lexus GX470, Lexus GX460
  • Designed to exact OE specs, using all new rubber bushes, washers and seats
  • New zinc coated hardware for corrosion resistance
  • Allows faster assembly of new components, not needing to disassemble used parts
  • Enough for 1 vehicle, sold as pairs
  • Product comes exactly as shown in the photo
  • Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
  • Can also add the labor to have struts, coils, and these top mounts assembled, click here to add that
  • Installation instructions

  $120.00 Add to cart
• 

  • 
  • 
  • 

  Upper Control Arms

  Ships FREE !!
  within 48 US States

  Dobinsons Billet Aluminum Adjustable UCA’s | 4Runner FJ Cruiser GX470 GX460

  • Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
  • Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
  • Complete kit for both left and right hand side
  • High clearance design to clear pretty much every coilover size available
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • Adds 2 or 3 degrees of added caster, and caster can be further adjusted
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • Installation Instructions
  • Video on YouTube showing features and Installation
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer

  $1,195.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  Dobinsons High Clearance Outer CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460

  • Complete OUTER kit includes 2 new OUTER boots, grease, and required clips – For 1 vehicle
  • If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
  • Made of high quality rubber for maximum life
  • Great for lifted SUV’s and Trucks with high CV angles
  • Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
  • Inside shape is round
  • These still install the old fashioned way without custom stretch boot tools needed

  $60.00 Add to cart