80 Series Land Cruiser (1990-1997)

You cannot add "Safari Snorkel for Land Cruiser 80 Series Snorkel 1991-1997" to the cart because the product is out of stock.

Showing 91–120 of 125 results

80 Series Land Cruiser (1990-1997)
Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride
- C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/510mm free height, 16mm wire, 179LBF/in rate
- Sold in Pairs
$270.00 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons C97-144VTB Dual Rate 3.5″ Front Coils | 80 Series 1990-1997 (Black)
- Lifts 3.5″ with a heavy load front end (bumper, winch, 2nd battery, etc). Lifts more without added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in the teal color
$485.00 Add to cart
Timbren
Ships FREE !!
within 48 US States
Timbren Bump Stops Front & Rear | Land Cruiser 80 Series
- Suits 1990-1997 Land Cruiser 80 Series
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORLC1 replaces the rear OEM bump stops and ABSTOFLC1A replaces the fronts on the Land Cruiser 80 Series. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Clearancing of the rear brackets and the bump stop cups may be required on some long travel setups to avoid clearance issues with the coil springs
- Front Instructions and Rear Instructions
$538.72 Add to cart
Snorkel
Safari Snorkel for Land Cruiser 80 Series Snorkel 1991-1997
- Suits Toyota Land Cruiser 80 Series 1991-1997
- Relocates Your Engine’s Air Intake Point to a Higher Location
- Crosslinked Polyethylene Construction
- Built to Perform in Extreme Weather Conditions
- Comes With Stainless Steel and Plated Hardware
- Bolt-On Installation; Drilling Is Required
- Supported by a 2-Year Warranty
- Fully Designed and Manufactured in Australia
- Designed and manufactured in Australia
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided.
- We also offer the Dobinsons Snorkel
$377.00 Read more
80 Series Land Cruiser (1990-1997)
Dobinsons 3.5-4″ IMS Lift Kit Builder | Land Cruiser 80 Series
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with additional options purchased**
- Coils are specifically suited to match OE spec and height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- IMS Shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension
- A double-cardan front drive shaft is required for any lift of 4″ or more on this vehicle – we don’t sell them
- You must choose what coils, shocks and other components you want to add
From $2,110.00 Select options
80 Series Land Cruiser (1990-1997)
Dobinsons C59-319 Rear Coil Springs | Land Cruiser 80 Series
- 80 Series – c59-319 6″ lift with 200LBS constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 545/555mm free height, 22mm wire, 376LBF/in rate
- Sold in Pairs
$405.00 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Winch Bumper | Toyota Land Cruiser 80 Series
- Airbag and winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster
- Supplied Black, but can be painted by your paint shop
- Suits 10000-12000 LB Low Mount Winches
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
From $1,765.00 Select options
80 Series Land Cruiser (1990-1997)
Dobinsons Front Adjustable Panhard Rod | 80 Series Right Hand Drive
- FOR RIGHT HAND DRIVE MODELS ONLY (Japanese import, etc.)
- Replaces OE Front Panhard Rod, adjustable to suit lift height
- Zinc plated steel then E-coated with all hardware and high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 3″ to 6″ of lift
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
- Image for illustration purposes only
$345.00 Add to cart
80 Series Land Cruiser (1990-1997)
Toyota FJ80 Knuckle Rebuild Kit with Bearings
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 (all years)
- Our FJ80 knuckle rebuild kit contains all of the replacement parts you need to service your steering knuckles including gaskets, felts, seals, spindle nut & washers, and shims
- New spindle bushings, trunnion bearings, and steel outer felt covers are also included
- The stamped steel outer felt covers are not found in other most other kits
- If you’re using your FJ80 in the rocks you will want to replace these covers when you service the knuckles
- The FJ80 Knuckle kit has all the parts you need to service both left and right knuckles
- Includes new wheel bearings
$219.99 Add to cart
Differential | Drivetrain
Ships FREE !!
within 48 US States
ARB RD132 Air Locker Toyota Lexus 8″ 10 bolt 30 Spline
- For Use With Toyota 8″ 10 bolt 30 Spline solid axle – used for many years in some front and rear applications
- Full vehicle fitment list is further down in the main description, includes 4Runner, Tacoma, FJ Cruiser, GX470 – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
$1,091.00 Select options
80 Series Land Cruiser (1990-1997)
Dobinsons C59-311 Rear 6″ Lift Coils with 880LBS | Land Cruiser 80 Series
- 80 Series – Dobinsons C59-311 6″ lift with 880LBS constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 615/615mm free height, 21mm wire, 280LBF/in rate
- Sold in Pairs
$405.00 Add to cart
Suspension
Ships FREE !!
within 48 US States
Dobinsons MRA59-A684 3-Way Adjustable MRA Front Shocks | 80 Series 6″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 6″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- 728mm extended, 432mm compressed
- Full 2 year limited warranty, no set rebuild time period
$1,350.00 Add to cart
ARB
OME 2863 Rear Coil Springs | Land Cruiser 80 and 100 Series
- OME Part Number 2863
- Bar Size : 18 mm
- Free Height : 505/515mm
- Number of Turns : 7.0
- Coil Weight (each): 6.9 Kg | 15.8 lbs
- Spring Rate : 250 lbs
- Sold in Pairs
$214.00 Add to cart
Performance Upgrades - 80 Series
Ships FREE !!
within 48 US States
10% Off For Memorial Day!!
Use coupon code MEMORIALDAY
Powerbrake D-Line HP Rotor and Pad Kit | 80 Series Front
- Suits Toyota Land Cruiser 80 Series 1990-1997 Front
- Powerbrake D-Line Features
  
  Rotors are cast from a proprietary high carbon cast-iron alloy.
  
  Rotors are machined to tolerances up to three times tighter than the industry norm.
  
  All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
  
  Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
  
  Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
  
  Matched high friction PB05 brake pads take the guesswork out of pad selection.
  
  Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
  
  Reduced stopping distances in both wet and dry conditions.
  
  Reduced brake fade and improved brake consistency.
  
  Improved initial brake response (bite).
  
  Improved brake modulation particularly during emergency stops.
  
  Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
  
  2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
  
  An axle set of matched PB05 high-performance brake pads – Made in Japan.
  
  Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
$810.00 Add to cart
Brakes
Ships FREE !!
within 48 US States
10% Off For Memorial Day!!
Use coupon code MEMORIALDAY
Powerbrake Stage 2 80 Series Land Cruiser Front Big Brake Kit
1990-1997 Toyota Land Cruiser 80 Series Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 2-Piece 13.7″ x 1.34″ 72-vane discs
- Semi-float disc drive system allows for radial disc expansion and contraction
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- Provided brake lines connect the caliper to the axle housing, then extended brake lines (sold separately) can be used as well for taller lift kits, connecting from the axle to the frame
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
$3,800.00 Select options
Suspension
Air Lift 60728 Rear Helper Air Springs (Airbags) | 80 Series 100 Series Sequoia
- Air Lift 60728 Suits Toyota Landcruiser 80 and 100 Series and Lexus LX450 and LX470, Toyota Sequoia 2001-2007 with coil springs in the rear
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Works with all Dobinsons rear coils for these vehicles up to 2.5″ of lift
- Works with 0-2.5″ of lift
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Installation Manual, Click Here
$148.00 Add to cart
Roof Racks
Dobinsons Full Length Roof Rack for Land Cruiser 60 and 80 Series
- Black Powder Coat
- Full Steel Construction
- 4mm Thick, 50mm x 50mm Mesh Flooring
- 32mm Outer Rail & 25mm Upper Rail
- 330lb rating
- Roof Top Tent Design – flat rack except in the front
- Integrated Tie Down Points
- Roof Rack Tire carrier
- Includes gutter mount fitting kit to secure the rack to your factory gutter rails
- Ships to the nearest freight terminal for you to pickup, or to commercial address with loading dock or forklift. Home delivery is optional, select that add-on down below
$1,205.00 Select options
80 Series Land Cruiser (1990-1997)
Dobinsons 6″ Lift IMS Kit Builder | Land Cruiser 80 Series
- Kit requires additional parts for this lift height, see below
- **Kit photo may show with additional options purchased**
- Coils are specifically suited to match lift height and added weight
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- IMS shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- Kit includes front and rear shocks and coils, steering damper, 5 degree castor kit, Front and Rear adjustable panhard rods for left hand drive, front sway bar extensions and rear proportioning valve extension – or whatever you add to the cart. If you don’t add it, it’s not included
- A double-cardan front drive shaft is required for any lift of 4″ or more on this vehicle – we don’t sell them
From $3,110.00 Select options
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Stock Height Restoration IMS Suspension Kit
- Restore your vehicle back to the original ride height, and bring the ride quality way up at the same time with the Dobinsons 80 Series Stock Height Suspension Kit
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- Coils are specifically suited to match OE spec and height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Shocks, 2 Rear Shocks, and 4 Coil Springs. Add on additional parts if desired
From $1,840.00 Select options
On Backorder
80 Series Land Cruiser (1990-1997)
10% Off For Memorial Day!!
Use coupon code MEMORIALDAY
Toyota Land Cruiser 80 Series 1993-1997 Long Range Replacement Fuel Tank (1FZ Gas)
- Suits Toyota Landcruiser 80 Series 1993-1997 with the 1FZ Gas Engine
- For US-spec 80 series with a single original tank (not dual tanks)
- Replacement tank – 37 gallon capacity replaces original 25 gallon tank
- Fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 5 hours
- Usually stocked item in the US
- Part Number TLC80FR-PA-US
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- Call or email to check and verify stock before ordering
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
$2,145.00 Select options
On Backorder
80 Series Land Cruiser (1990-1997)
Dobinsons C59-153 Rear Coil Springs | Land Cruiser 80 Series
- Suits Land Cruiser 80 Series 1990-1997 – C59-153 – 3″ lift with 880LBS constant rear load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 470/460mm free height, 21mm wire diameter, 394LBF/in spring rate
$405.00 Add to cart
Suspension
Ships FREE !!
within 48 US States
Dobinsons MRA59-A685 3-Way Adjustable MRA Rear Shocks | 80 Series 6″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 6″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 714mm extended, 440mm compressed
- Installation Instructions of the MRA Shocks
$1,350.00 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Front Bump Stop Extensions Kit (1.0-2.0 in)
- Suits the Front of all Toyota Land Cruiser 80 Series from 1990 to 1997
- 1″ (25mm) extensions stackable up to two per spot for a total of 2″ (50mm) of thickness
- Durable Solid Steel Spacers
- Sold as a Kit for inner and outer rear bump stops
- The inner goes inside the coil spring on the inner bump stop
- The outer goes between the mount and the bump stop on the frame
- Space down your bump stops to prevent shock bottom outs at full compression
- Keep your tires out of your fenders if they’re oversized by spacing down the bump stops
- General bump stop extension guidelines (will vary based on brand of shocks and bump stops used)
  
  Dobinsons 0-3″ lift shocks: Extensions are not necessary, unless running oversized tires
  
  Dobinsons 4-5″ lift shocks: Front needs about .5″ of bump stop extension, rear needs 2” of bump extension
  
  Dobinsons 6″ lift shocks: Front needs about 1.5” bump stop extension, rear needs a 3” extension or 2″ extension with extended length bump stops
- We offer replacement bump stops as well Here
$150.00 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Rear Bump Stop Extensions Kit (1.0-2.0 in)
- Suits the rear of all Toyota Land Cruiser 80 Series from 1990 to 1997
- 1″ (25mm) extensions stackable up to two per spot for a total of 2″ (50mm) of thickness
- Durable Solid Steel Spacers
- Sold as a Kit for inner and outer rear bump stops
- The inner goes inside the coil spring on the axle end
- The outer goes between the mount and the bump stop on the frame
- Space down your bump stops to prevent shock bottom outs at full compression
- Keep your tires out of your fenders if they’re oversized by spacing down the bump stops
- General bump stop extension guidelines (will vary based on brand of shocks and bump stops used)
  
  Dobinsons 0-3″ lift shocks: Extensions are not necessary, unless running oversized tires
  
  Dobinsons 4-5″ lift shocks: Front needs about .5″ of bump stop extension, rear needs 2” of bump extension
  
  Dobinsons 6″ lift shocks: Front needs about 1.5” bump stop extension, rear needs a 3” extension or 2″ extension with extended length bump stops
- We offer replacement bump stops as well Here
$150.00 Add to cart
New Item
Shocks - 80 Series Land Cruiser
Ships FREE !!
within 48 US States
Dobinsons IMS59-60689 Front IMS 2.6″ Shocks | 80 Series – 31″ Extended
- 31″ long 2.6″ body shocks for the front of a Toyota Land Cruiser 80 Series
- For custom use, extreme front long travel shocks, longer than the Dobinsons 6″ lift shocks
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 790mm (31.1″) extended, 467mm (18.4″) compressed
- Bump stop extensions are required to prevent bottom outs, depending how you mount the shocks
- Photo for illustration purposes
$650.00 Add to cart
New Item
Shocks - 80 Series Land Cruiser
Ships FREE !!
within 48 US States
Dobinsons IMS59-60681 Rear IMS 2.6″ Shocks | 80 Series – 31″ Extended
- 31″ long 2.6″ body shocks for the rear of a Toyota Land Cruiser 80 Series
- For custom use, extreme rear long travel shocks, longer than the Dobinsons 6″ lift shocks
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 790mm (31.1″) extended, 480mm (18.9″) compressed
- Bump stop extensions are required to prevent bottom outs, depending how you mount the shocks
- Photo for illustration purposes
$650.00 Add to cart
ARB
OME 2850 Front Coil Springs | Land Cruiser 80 and 105 Series
- OME Part Number 2850
- Bar Size : 16.5 mm
- Free Height : 495/505 mm
- Number of Turns : 9.0
- Coil Weight (each): 6.2 Kg | 13.6 lbs
- Spring Rate : 220 lbs
- Sold in Pairs
$214.00 Add to cart
ARB
OME 2851 Front Coil Springs | Land Cruiser 80 and 105 Series
- OME Part Number 2851
- Bar Size : 16 mm
- Free Height : 475/485 mm
- Number of Turns : 8.18
- Coil Weight (each): 5.3 Kg | 11.7 lbs
- Spring Rate : 220 lbs
- Sold in Pairs
$214.00 Add to cart
ARB
OME 2864 Rear Coil Springs | Land Cruiser 80 and 100 Series
- OME Part Number 2864
- Bar Size : 19 mm
- Free Height : 480/490 mm
- Number of Turns : 7.2
- Coil Weight (each): 7.8 Kg | 17.2 lbs
- Spring Rate : 320 lbs
- Sold in Pairs
$242.00 Add to cart
ARB
OME 2862 Rear Coil Springs | Land Cruiser 80 and 100 Series
- OME Part Number 2862
- Bar Size : 17 mm
- Free Height : 460/470 mm
- Number of Turns : 9.0
- Coil Weight (each): 7.8 Kg | 17.2 lbs
- Spring Rate : 170-260 lbs
- Variable Rate Springs
- Sold in Pairs
$214.00 Add to cart