Your cart is currently empty!
within 48 US States
All Pro 5th Gen 4Runner IFS Skid Plate – Black Coated Steel
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Black Powder Coat
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skidplate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$440.00
In StockDescription
2010-2024 4Runner IFS Skid Plates
Whether you are climbing over rocks, fording a river, or evading potholes, your factory skid plate is inadequate. The sensitive components on the front end of your vehicle are also among the least shielded. All-Pro Off-Road’s 2010-2024 4Runner IFS Skid Plates provide much needed protection for your front differential and steering components.
If you need protection but want to keep the weight down for the sake of fuel economy, suspension wear and off-road performance, you need our 1/4-inch thick 5052 Aluminum IFS Skid Plate. With the optimal balance between strength and weight, this aluminum plate will hold up against significant abuse and, at only 22 lbs, it’s half the weight of similar steel undercarriage protection.
Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate.
AP-308099 | 2010+ 4Runner Steel IFS Skid Plate – Steel Bare |
AP-308100 | 2010+ 4Runner Steel IFS Skid Plate – Steel Black Powder Coat |
AP-308101 | 2010+ 4Runner Steel IFS Skid Plate – Aluminum Bare |
AP-308102 | 2010+ 4Runner Steel IFS Skid Plate – Aluminum Black Powder Coat |
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
NOTE:Â
Bare steel versions require painting before installation.
Skidplate not currently compatible with diff drop kit.
Additional information
Weight | 31 lbs |
---|
You may also like…
-
Skid Plates + Sliders - 5th Gen 4RunnerShips FREE !!
within 48 US StatesAll Pro 5th Gen 4Runner IFS Skid Plate – Bare Aluminum
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 1/4-inch thick 5052 Aluminum – Bare
- Optimal balance between strength and weight
- At only 22 lbs, it’s half the weight of similar steel undercarriage protection
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skidplate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$380.00 Add to cart -
Skid Plates + Sliders - 5th Gen 4RunnerShips FREE !!
within 48 US StatesAll Pro 5th Gen 4Runner IFS Skid Plate – Aluminum Black
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 1/4-inch thick 5052 Aluminum – Black Powder Coated
- Optimal balance between strength and weight
- At only 22 lbs, it’s half the weight of similar steel undercarriage protection
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skidplate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$440.00 Add to cart -
Skid Plates + Sliders - 5th Gen 4RunnerShips FREE !!
within 48 US StatesAll Pro 5th Gen 4Runner IFS Skid Plate – Bare Steel
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Bare Steel – needs to be painted before installation
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skidplate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$380.00 Add to cart
Related products
-
Dobinsons
Dobinsons C59-675V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 470mm free height, 16mm wire diameter, 157-230LBF/INÂ variable spring rate
$305.00 Select options -
Dobinsons
Dobinsons C59-300 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 385mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
$270.00 Select options -
ExceptionsShips FREE !!
within 48 US StatesETA is July 2024Dobinsons Tubular UCA Kit | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
$795.00 Add to cart -
Dobinsons
Dobinsons C59-749V Rear Extremely HD Long Travel Coil Springs | Toyota and Lexus
- Dobinsons C59-749V Give this lift and suits these models:
- 3.0″ – Toyota 4Runner 5th Gen – 2010 to 2024 – w/850-1000LBS Load Maximum Flex Coils
- 3.0″ – Toyota 4Runner 4th Gen – 2003 to 2009 – w/750-900LBS Load Maximum Flex Coils
- 3.5″ – Toyota FJ Cruiser – all years – w/850-1000LBS Load Maximum Flex Coils
- 3.0″ – Lexus GX470 – w/750-900LBS Load Maximum Flex Coils
- 3.0″ – Lexus GX460 – w/850-1000LBS Load Maximum Flex Coils
- Super Heavy Long Travel and Variable Rate coils available worldwide for Toyota and Lexus SUV’s
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Important: Read first line below in description before proceeding!!!
- 500mm free height, 18mm wire, 198-300LB variable rate, usually around 270LB at loaded height
$305.00 Select options - Dobinsons C59-749V Give this lift and suits these models: