You may be interested in…

• 

  • 
  • 
  • 

  Dirt King Fabrication

  FREE SHIPPING
  within 48 US States

  Dirt King 2.5 FJ Cruiser DCA Remote Resi Coilovers

  • Suits Toyota FJ Cruiser 2006-2016 (all years)
  • Comes preset to 2.0″ of lift
  • Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
  • Dual Compression Adjusters with 10 adjustments for each knob
  • Increased suspension travel
  • Specific valving for each vehicle providing optimal ride comfort
  • Aluminum body for cooler operation and corrosion resistance
  • Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
  • Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
  • Direct bolt-on replacement that uses factory shock mounting location
  • Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
  • Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
  • Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
  • 2.5″ hard-anodized 6061 aluminum bodies
  • Progressive valving
  • Internal floating piston
  • Induction-hardened 3/4″ shafts
  • Provides up to 3” of lift | Must be paired with aftermarket UCA
  • Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
  • What’s Included:
    • 2.5 DCA coilover shocks with remote reservoirs Pair
    • Coils installed are 13” long, 700 LBF/in Spring Rate
    • Sway bar relocation mounts with reservoir brackets
    • Spanner wrench
    • All necessary mounting hardware
    • Installation instructions
    • Installation video is down below
  • Matching Rear Shocks

  Rated 4.25 out of 5

  (4 reviews)

  $2,253.00 Add to cart
• 

  • 
  • 
  • 

  Dobinsons

  FREE SHIPPING
  within 48 US States

  Dobinsons IMS59-50222 Extended Travel Front 2.2″ IFP Struts Pair | Tacoma 4Runner Tundra Sequoia

  • Suits 1996-2002 3rd Gen 4Runner, 1996-2004 1st Gen Tacoma, 2000-2006 Toyota Tundra, 2001-2007 Toyota Sequoia, Toyota Prado 90
  • Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
  • Extended Travel
  • Fully rebuildable and re-valvable
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height
  • Standard coil seat height is 164mm
  • Struts only, sold as a pair – the coils are sold separately
  • 473mm extended, 335mm compressed lengths
  • It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel and a diff drop kit
  • Note: Anyone lifting over 2″ shock install the included droop spacer, as pictured, and run a diff drop kit and UCA’s

  Rated 5.00 out of 5

  (13 reviews)

  $650.00 Add to cart
• 

  • 
  • 
  • 

  80 Series Land Cruiser (1990-1997)

  FREE SHIPPING
  within 48 US States

  Dobinsons SS59A824 Adjustable Monotube Steering Damper | Land Cruiser

  • Suits Land Cruiser 60, 70 and 80 Series and Lexus LX450
  • 56mm Extruded and CNC machined 6061-T6 hard anodized aluminum body
  • Hard-anodized and clear coated for a durable finish.
  • External reservoir design separates oil and high-pressure nitrogen gas
  • Black-anodized, CNC machined 6061-T6 billet aluminum Components
  • 5/8” hard chrome plated heat treated alloy steel Shaft
  • 50mm high-flow 6061-T6 CNC machined Piston
  • Natural rubber OEM style bushings
  • Direct replacement for stock and after-market lifts kits
  • 12 stage adjustment range
  • Installation Instructions

  Rated 5.00 out of 5

  (5 reviews)

  $450.00 Add to cart
• 

  • 
  • 
  • 

  Firestone

  FREE SHIPPING
  within 48 US States

  Firestone 2900 Air Command Air Compressor System

  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Single Point Fill (Both Air Springs Fill To The Same Pressure)
  • Light Duty Compressor Specs (100 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
  • Electric analog gauge and a single toggle switch (includes housing for easy installation).
  • Plug and play wiring harness.
  • 30ft of 1/4″ tubing. All required hardware for installation.
  • No-Drill Mounting Plate
  • Limited 2 Year Warranty
  • Dash Panel Style: Controls Two Air Springs Simultaneously
  • Type: Heavy Duty
  • Maximum Pressure (PSI): 100 Pounds Per Square Inch
  • Operation Type: Switch Operated
  • Estimated Install Time (Hours): 2
  • Installation Manual

  (0 reviews)

  $402.16 Add to cart
• 

  Bilstein

  Bilstein 25-311211 – 5160 Series Rear Left Shock

  • Suits 2003-2024 Toyota 4Runner, 2003-2009 Lexus GX470, 2010-2023 Lexus GX460, 2006-2017 FJ Cruiser
  • Suits 0-2″ of lift
  • Type: Nitrogen Gas Charged
  • With Coil Spring: No
  • Internal Design: Monotube
  • Adjustable Valving: No
  • Extended Length (IN): 23.5 Inch
  • Compressed Length (IN): 14.25 Inch
  • Upper Mounting Style: Stud
  • Lower Mounting Style: Eyelet
  • Body Color: Silver
  • Quantity: Single
  • With Reservoir: Yes
  • Includes Dust Shield: Yes
  • Includes Hardware: Yes
  • Includes Boot: Yes
  • Estimated Install Time (Hours): 1
  • Sold individually – This is the Left (driver’s) side rear shock
  • Link to matching right side shock

  Rated 4.43 out of 5

  (7 reviews)

  $300.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons IMS59-60710 2.6″ IFP Front Struts Pair | Toyota Tundra & Sequoia

  • For 1.75-3.0″ of lift
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Features clip adjustment levels for fine tuning of lift height
  • 4 Clip height settings. Lowest height is stock/OE height.  Each clip height adds approximately 1/2″ of lift.  Use clip heights to fine tune lift height or offset for vehicle lean
  • Recommended to run with Dobinsons coils.  OE coils may contact the thicker shock body
  • TRD Pro models should start at the 2nd clip up to add 1/2″ of coil seat height, which equals the 1″ of lift the PRO’s come with when new
  • ASSEMBLY INSTRUCTIONS
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • 615mm extended, 445mm compressed lengths
  • Full 2 year limited warranty, no set rebuild time period
  • If you are buying parts separately (coils and struts) and want them preassembled prior to shipping, add this product to your cart also

  Rated 5.00 out of 5

  (13 reviews)

  $720.00 Add to cart
• 

  • 
  • 
  • 

  Full Suspension Kits - Sequoia 2nd Gen

  FREE SHIPPING
  within 48 US States

  Dobinsons 1.75-3.0″ Pre-Assembled IMS Coilovers for Toyota Sequoia 08-22

  • Suits Toyota Sequoia 2008-2022 4×4 Models with 5.7L V8 Gas Engine
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
  • Looking for a quick and easy way to lift your Sequoia?  This is your answer
  • Select your desired lift height and tell us your weight – we’ll take care of the rest!!
  • Dobinsons IMS are height adjustable by an adjustable circlip.  Springs must be compressed to change the clip height
  • All are assembled at the requested clip height in the drop box
  • The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
  • Fully rebuildable and re-valvable
  • 615mm extended, 445mm compressed strut lengths
  • SOLD IN PAIRS – READY TO BOLT IN
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment, does require lower mount clearancing
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • Full 2 year limited warranty, no set rebuild time period
  • Photos for illustration purposes – Sequoia IMS coilovers use a slightly different coil seat as shown in secondary photos
  • Instructions for setting coil seat height
  • Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle.  Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
  • Link to Matching rear shocks
  • Add an optional lean correction spacer for the driver’s side here
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order

  Rated 5.00 out of 5

  (3 reviews)

  $1,395.00 Select options
• 

  • 
  • 
  • 

  SPC

  FREE SHIPPING
  within 48 US States

  SPC 25485 | UCA’s for 2001-07 Sequoia & 1999-06 Tundra Pair

  • Suits 2001-07 Toyota Sequoia & 1999-06 Toyota Tundra
  • Improved clearance to get around the spring bucket
  • 80° of articulation in its ball joint
  • SPC’s arm gives you maximum droop travel.
  • SPC’s arms have +1° of caster built into them
  • Arm will get you 0° to +4° of caster and ±2° of camber
  • Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
  • Installation Instructions

  Rated 5.00 out of 5

  (11 reviews)

  $895.96 Add to cart
• 

  • 
  • 
  • 

  Dirt King Fabrication

  FREE SHIPPING
  within 48 US States

  Dirt King 2.5 Lexus GX470 DCA Remote Resi Coilovers

  • Suits Lexus GX470 2003-2009 (all years)
  • Will not suit KDSS models due to the front reservoir mounting position
  • Comes preset to 2.0″ of lift
  • Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
  • Dual Compression Adjusters with 10 adjustments for each knob
  • Increased suspension travel
  • Specific valving for each vehicle providing optimal ride comfort
  • Aluminum body for cooler operation and corrosion resistance
  • Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
  • Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
  • Direct bolt-on replacement that uses factory shock mounting location
  • Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
  • Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
  • Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
  • 2.5″ hard-anodized 6061 aluminum bodies
  • Progressive valving
  • Internal floating piston
  • Induction-hardened 3/4″ shafts
  • Provides up to 3” of lift | Must be paired with aftermarket UCA
  • Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
  • What’s Included:
    • 2.5 DCA coilover shocks with remote reservoirs Pair
    • Coils installed are 13” long, 700 LBF/in Spring Rate
    • Sway bar relocation mounts with reservoir brackets
    • Spanner wrench
    • All necessary mounting hardware
    • Installation instructions
    • Installation video is down below
  • Matching Rear Shocks

  Rated 4.50 out of 5

  (4 reviews)

  $2,253.00 Add to cart
• 

  • 
  • 

  Dirt King Fabrication

  FREE SHIPPING
  within 48 US States

  Dirt King 2.0 IFP 4Runner Coilovers Pair | 4Runner 2003-2024

  • Suits Toyota 4Runner 4th Gen and 5th Gen 2003-2024
  • Increased suspension travel
  • Vehicle specific valving providing optimal ride comfort
  • Aluminum body for cooler operation and corrosion resistance
  • Direct bolt-on replacement that uses factory shock mounting location
  • Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
  • Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
  • Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
  • 2″ hard-anodized 6061 aluminum bodies
  • Progressive valving
  • Internal floating piston
  • Induction-hardened 5/8″ shafts
  • Provides up to 3” of lift | Must be paired with aftermarket UCA
  • Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
  • What’s Included:
    • 2.0 Dirt King IFP Series coilovers Pair
    • Coils installed are 13” long, 700 LBF/in Spring Rate
    • Sway bar relocation mounts
    • Spanner wrench to adjust height/preload
    • All necessary mounting hardware
    • Installation instructions
  • Matching Rear Shocks

  Rated 4.50 out of 5

  (4 reviews)

  $1,175.00 Add to cart
• 

  • 
  • 
  • 

  MRA Remote Resi 3-Way Adjustable Monotube

  FREE SHIPPING
  within 48 US States

  Dobinsons MRA59-A701 3-Way Adjustable MRA Shocks Pair

  • Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 22mm / 7/8″ shaft diameter
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Shock Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • 609mm extended, 389mm compressed
  • SOLD IN PAIRS
  • Now comes with a longer hose and different mounting instructions

  Rated 5.00 out of 5

  (18 reviews)

  $1,150.00 Add to cart
• 

  • 
  • 
  • 

  Full Suspension Kits - 5th Gen 4Runner

  FREE SHIPPING
  within 48 US States

  Dobinsons 2-3.5″ Extended Travel 3-Way Adj MRA Coilovers | 4Runner 5th Gen 2010-2024

  • Suits 2010-2024 Toyota 4Runner 5th Gen 4×4 Models – Extended Travel
  • Looking for a quick and easy way to lift your 4Runner?  This is your answer
  • A 4×2 model lifts 1″ extra with the 4×4 lift heights
  • Select your desired lift height and spring rate – we’ll take care of the rest!!
  • Dobinsons MRA are height adjustable by a fully threaded body
  • The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • MRA59-A574 Extended Travel – 575mm extended, 420mm compressed
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height
  • Resi installation instructions
  • To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment.  A diff drop kit is also recommended to minimize CV binding at full droop
  • Link to Matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order
  • Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge.  Many vehicles come in at different heights from the factory based on trim levels and options

  Rated 5.00 out of 5

  (3 reviews)

  $1,820.00 Select options
• 

  Sequoia 2nd Gen (2008-2022)

  Dobinsons Stock Height Rear Coils for Toyota Sequoia 2008-2022 5.7L V8 – Pair

  • C59-475 are made specifically for the 2008 to 2022 Toyota Sequoia as new stock height replacement coils
  • These will replace your worn out factory coils and bring it back to the original factory height
  • Not suitable on vehicles that came with factory rear air suspension
  • Fully Designed, Manufactured, and Finished In Australia
  • Ultra modern design technology, Fully Scragged & Load Tested
  • State of the Art Heat Treatment, High Intensity Shot Peened
  • Formed on Precision Mandrels, Precise End Configurations
  • Durable Powder Coat Finish
  • 624LBF/in spring rate
  • Sold in Pairs
  • Can be used with stock rear shocks or Dobinsons GS59-713 or IMS59-60713

  Rated 5.00 out of 5

  (5 reviews)

  $405.00 Add to cart
• 

  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons GS59-713 Pair of Rear Shocks | Toyota Sequoia 2008-2022

  • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
  • Superior Design, thicker walls, longer travel
  • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
  • Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
  • Matched to compliment Dobinsons Complete Suspension Systems
  • Sold in Pairs
  • Dobinsons GS59-713 Specifications: 471mm extended, 315mm compressed
  • Add this kit when buying these shocks if you will be using these for 2.5″of lift

  Rated 5.00 out of 5

  (6 reviews)

  $310.00 Add to cart
• 

  Dobinsons

  Dobinsons Pair of Strut Top Plates for Toyota Tundra 07-21 Sequoia 08-22

  • Made specifically for the 4×4 Toyota Tundra from 2007-2021 and Toyota Sequoia from 2008 to 2022
  • Designed to exact OE specs, using all new rubber bushes, washers and seats
  • New zinc coated hardware for corrosion resistance
  • Allows faster assembly of new components, not needing to disassemble used parts
  • Enough for 1 vehicle, sold in pairs
  • Photo for illustration purposes

  Rated 5.00 out of 5

  (7 reviews)

  $120.00 Add to cart
• 

  • 
  • 

  Suspension

  Air Lift 60728 Rear Helper Air Springs (Airbags) | 80 Series 100 Series Sequoia

  • Air Lift 60728 Suits Toyota Landcruiser 80 and 100 Series and Lexus LX450 and LX470, Toyota Sequoia 2001-2007 with coil springs in the rear
  • Complete kit – 1 per vehicle
  • Inserts inside your rear coil springs to add additional load support
  • Manually inflate or deflate the air bags to add or remove support or height
  • Perfect for people who tow, or regularly load up fully and need additional height or support
  • Works with all Dobinsons rear coils for these vehicles up to 2.5″ of lift
  • Works with 0-2.5″ of lift
  • Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
  • Installation Manual, Click Here

  Rated 5.00 out of 5

  (3 reviews)

  $148.00 Add to cart