“Dobinsons GS59-222 Struts for 4Runner 96-02 Tacoma 98-04 Sequoia 01-07 Tundra 00-06” has been added to your cart. Continue shopping
You may be interested in…
-
Upper Control ArmsFREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s Pair | 4Runner FJ Cruiser GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered here
(8 reviews) -
4Runner 5th Gen (2010-2024)
Dobinsons 15mm Rear Spacer | 4Runner FJ Cruiser Lexus GX470 GX460
- Suits various vehicles, as listed below
- High Quality Polyurethane, maintains height over time
- Fits on top of OE isolator, below the frame mount
- Sold as 1 piece
- Lasts longer than rubber
- Easy to add lift height to correct for vehicle lean
- Adds 15mm (0.6″) of lift
(18 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTimbren ABSTORSEQ Active Off Road Rear Bump Stops | Toyota and Lexus SUV’s
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series
-
Specs:
- 2,000 lb capacity
- 4,800 lb bump load capacity
- Overall kit height = 5”
- Total deflected (compressed) height = 2.75”
- Amount of deflection (compression) = 2.25”
- Click here for instructions
- Installation video from Exit Offroad
- Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs. Timbren make 2 options, they do not include any longer bolts which may be required
- A25722-90F00 (1/2″ spacer)
- A25723-90AD00 (1″ spacer)
(13 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60713 2.6″ IFP Rear Shocks Pair | Toyota Sequoia 2008-2022
- Suits 2008-2022 Toyota Sequoia without rear air suspension, for lift heights between 0″ and 2.5″
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 343mm compressed length, 489mm extended length (these are extended travel over the GS59-713 shocks)
- Note: the video shows an IMS front strut that takes a coil. This listing is for the rear IMS shock, no adjustability.
(14 reviews) -
Skid Plates
Rear Shock Mount Skids | 2010-2024 4Runner FJ Cruiser GX460
- Includes one pair of rear shock mount skid plates (Driver/Passenger)
- Protects low hanging shock mounts on all 2010-2024 4Runner, FJ Cruiser and Lexus GX460 models
- Includes all hardware for installation
- Product includes a heavy duty black powder coat finish
- Made in USA
(4 reviews) -
Sequoia 2nd Gen (2008-2022)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A713 3-Way Adjustable Rear Shocks Pair | Sequoia 2008-2022
- Suits Toyota Sequoia 2008-2022
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
(13 reviews) -
4Runner 5th Gen (2010-2024)
3/4″ Rear Coil Spacer Single | 4Runner FJ Cruiser Lexus GX470 GX460
- Suits Toyota 4th Gen 4Runner – 2003 to 2009, Toyota 5th Gen 4Runner – 2010 to 2024, Toyota FJ Cruiser – all years, Lexus GX470 – all years, Lexus GX460 – all years, Toyota Prado 120 – all years, Toyota Prado 150 – all years
- Sold Individually
- Long lasting – hard durometer polyurethane
- Easily add rear lift or fix leaning issues
- Optional- bolt to the coil bucket for easy installation. We have noticed that it can be difficult for customers to install other brands, as they tend to slide around while you are trying to reinstall the spring. Bolting it to the coil bucket eliminates that issue.
- Do not stack
- Fits any OE style spring – Top Cone isolator- Apache, Dobinsons, Ironman, OEM, Old Man Emu, Alldogs Offroad, etc.
- NOT compatible with Eibach rear lift springs used in their air to coil conversions – GX470/460 etc.
- Cone Isolator shown in picture not included
- Airbag Models will need to convert for coil springs for these to work
(10 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s Pair | Tacoma Hilux Fortuner 2005-23
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
- Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered Here
(9 reviews) -
4Runner 5th Gen (2010-2024)
1/2″ Rear Coil Spacer Single | 4Runner FJ Cruiser Lexus GX470 GX460
- Suits Toyota 4th Gen 4Runner – 2003 to 2009, Toyota 5th Gen 4Runner – 2010 to 2024, Toyota FJ Cruiser – all years, Lexus GX470 – all years, Lexus GX460 – all years, Toyota Prado 120 – all years, Toyota Prado 150 – all years
- Sold Individually
- Long lasting – hard durometer polyurethane
- Easily add rear lift or fix leaning issues
- Optional- bolt to the coil bucket for easy installation. We have noticed that it can be difficult for customers to install other brands, as they tend to slide around while you are trying to reinstall the spring. Bolting it to the coil bucket eliminates that issue.
- Do not stack
- Fits any OE style spring – Top Cone isolator- Apache, Dobinsons, Ironman, OEM, Old Man Emu, Alldogs Offroad, etc.
- NOT compatible with Eibach rear lift springs used in their air to coil conversions – GX470/460 etc.
- Cone Isolator shown in picture not included
- Airbag Models will need to convert for coil springs for these to work
(10 reviews) -
Dobinsons
Dobinsons Pair of Strut Top Plates for Toyota Tundra 07-21 Sequoia 08-22
- Made specifically for the 4×4 Toyota Tundra from 2007-2021 and Toyota Sequoia from 2008 to 2022
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
(7 reviews)
Cart totals
| Subtotal | $17,722.00 |
|---|---|
| Shipping |
Shipping to FL. |
| Tax | $1,332.99 |
| Total | $19,105.99 |
