“Overland Vehicle Systems Nomadic 2 Extended RTT Roof Top Tent” has been added to your cart. Continue shopping
“Icon Billet UCA DJ Pro Pair for 22-25 Tundra + 23-25 Sequoia” has been added to your cart. Continue shopping
You may be interested in…
-
Awning Walls + RoomsFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Nomadic 6.5FT Awning Side Shade Wall
- Awning Side Wall / Wind Break for 6.5FT Awnings
- Body Material: 600D Poly Cotton Rip Stop
- Mounting: Velcro Straps
- Can Mount to Either Side of Awning (not the end)
- Treatment: Waterproofing on Canvas
- QTY: 1
- Open Dimensions: X” x X” x X”
- Set Up Time: 1 Minute
- Warranty: 4 Year Limited Warranty
(3 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesIcon Tubular UCA DJ Pro Pair for 22-25 Tundra + 23-25 Sequoia
- Suits 2022-2025+ Tundra and 2023-2025+ Sequoia 4×4 Models with 1.75+ of lift over a base model
- Built in added caster for better handling on lifted vehicles
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- Serviceable dual stage pivot bushings
- CNC machined housings for bushings and Delta Joint PRO
- 1026 DOM tube construction with black powder coat finish
- Includes billet dust caps for Delta Joint PRO
- Installation Guide
- Warranty Info
(11 reviews) -
Full Suspension Kits - Tundra 3rd GenFREE SHIPPING
within 48 US StatesDobinsons 2-3″ IMS Tundra Lift Kit | 2022-2025 Toyota Tundra
- Dobinsons IMS suspension kit for your 2022-2025+ Toyota Tundra
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Hybrid Models lift 1-1.5″ less lift than listed here
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- 22mm shaft diameter on front struts, 18mm on rear shocks
- Fully rebuildable and re-valvable shocks
- No specific rebuild intervals – rebuild only when necessary
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- IMS59-60446 specs – 540mm extended, 390mm compressed
- IMS59-60887 and IMS59-60687 specs – 680mm extended, 421mm compressed
- Choose your desired suspension parts to build the kit best suited to your weight and desired lift height
- Installation Note: Transfer over the rear OEM coil isolators from the stock coils to these to prevent coil slap
- If doing a 2.5″ lift or higher in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- **Not compatible with factory rear airbag suspension
- Standard Coil seat height for IMS59-60446 should be set at 175mm (6.87″) from the strut bushing eye to top of coil isolator. Add preload as necessary to adjust the height further
(6 reviews) -
Control Arms - Tundra 2022+FREE SHIPPING
within 48 US StatesIcon Billet Rear Lower Trailing Arms Pair | 22+ Tundra 23+ Sequoia 24+ Tacoma
- Suits 2022-2025+ Tundra and 2023-2025+ Sequoia 4×4 Models and 2024-2025+ Tacoma
- On vehicle adjustment for different ride heights and pinion angles using ICON’s Double Adjuster System
- Vehicle specific, high clearance design for reduced link contact with obstacles
- Replaceable Nylon Rock Slider to protect the link from damage
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- Installation Guide
- Warranty Info
(10 reviews) -
AwningsFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Nomadic 6.5FT Awning (2.0M) – With Black Cover
- 53 Square Feet of Covered Shelter
- 280G Poly Cotton Rip-Stop Cover
- Boxed Aluminum Rafters
- Pivoting Aluminum Adjustable Poles
- Tie Down Points for Securing Poles and Water Run Off
- 1000G PVC Travel Cover With 10 Lb Zipper
- Ballistic Nylon Tie Downs With S Connects and Buckle
- Shock Cord With Retention
- Zippers To Secure Enclosed Shelter
- Heavy Duty Oversized Stakes
What’s included:
- Nomadic 6.5FT Awning With 2 Built-In Aluminum Rafters
- 2 Pivoting and Telescoping Aluminum Poles
- 2 Sets of Shock Cord
- 2 Heavy Duty Stakes
- Travel Cover
- 2 Heavy Duty Mounting Brackets and Hardware
- Nylon Reinforced Tie Down Kit
- Opened: 98.5 inch x 78.5 inch (8.2FT out x 6.5FT wide)
(8 reviews) -
Tundra 3rd Gen (2022-2025+)
Dobinsons Adjustable Rear Upper Trailing Arms Pair | WA59-571K
- Suits Toyota Tundra 2022-2025+, Sequoia 2023-2025+, Land Cruiser 250 Series 2024-2025+, and Tacoma 2024-2025+ and Lexus GX550 2024+
- Fully adjustable to properly set the length and pinion angle
-
On car adjustable with a left hand threaded side (Silver Nut) and a right hand threaded side (Gold Nut)
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- **Not suitable for vehicles with rear height sensors (attached to OEM arms)
- Trailing arms DO NOT have headlight adjustment bracket
- Instructions written down below in the description
(4 reviews)
Cart totals
| Subtotal | $4,581.87 |
|---|---|
| Shipping |
Shipping to FL. |
| Route Shipping Protection | $114.55 |
| Tax | $343.65 |
| Total | $5,040.07 |
