You may be interested in…

• 

  • 
  • 
  • 

  Skid Plates + Sliders - 5th Gen 4Runner

  Ships FREE !!
  within 48 US States

  All Pro 5th Gen 4Runner IFS Skid Plate – Aluminum Black

  • Suits 2010-2024 Toyota 4Runner 5th Gen
  • Covers from the front bumper down to the first cross member
  • 1/4-inch thick 5052 Aluminum – Black Powder Coated
  • Optimal balance between strength and weight
  • At only 22 lbs, it’s half the weight of similar steel undercarriage protection
  • Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
  • Skidplate not currently compatible with a diff drop kit – you would have to space it down
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Compatible with All-Pro 2010+ 4Runner Front Bumpers
  • Not tested with KDSS Vehicles
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Installation Instructions

  $440.00 Add to cart
• 

  Trail-Gear

  Trail-Gear Rock Assault 6-Ply Limit Strap (8″-40″ Lengths)

  • Multiple lengths available, from 8″ to 40″
  • SOLD INDIVIDUALLY
  • 6-layer, 1.75” nylon webbing limit straps
  • 3/16″ thick heat-treated 4130 Chromoly Steel zinc-plated buckles with 1/2″ mounting hole
  • Made from 9,000 lb. test nylon straps
  • Anti-abrasion clips have been installed in each buckle to minimize wear
  • Strap lengths are measured from the center of the mounting holes and are guaranteed accurate to +/- 1/4”
  • When selecting, choose a limit strap that is 1” shorter than the shock to prevent full extension and possible breakage of shock.
  • Requires custom mounting and does not come with any hardware or mounts
  • One mounting option is the with the Limit Strap Clevis Kit

  $49.00 Select options
• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons IMS59-60685 Rear IMS Shocks | Land Cruiser 80 Series (6″ lift)

  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period
  • 730mm extended, 446mm compressed

  $650.00 Add to cart
• 

  New Item

  • 
  • 
  • 

  Shocks - 80 Series Land Cruiser

  Ships FREE !!
  within 48 US States

  Dobinsons IMS59-60689 Front IMS 2.6″ Shocks | 80 Series – 31″ Extended

  • 31″ long 2.6″ body shocks for the front of a Toyota Land Cruiser 80 Series
  • For custom use, extreme front long travel shocks, longer than the Dobinsons 6″ lift shocks
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period
  • 790mm (31.1″) extended, 467mm (18.4″) compressed
  • Bump stop extensions are required to prevent bottom outs, depending how you mount the shocks
  • Photo for illustration purposes

  $650.00 Add to cart
• 

  • 
  • 
  • 

  Skid Plates + Sliders - 5th Gen 4Runner

  Ships FREE !!
  within 48 US States

  All Pro 5th Gen 4Runner IFS Skid Plate – Black Coated Steel

  • Suits 2010-2024 Toyota 4Runner 5th Gen
  • Covers from the front bumper down to the first cross member
  • 3/16-inch steel – Black Powder Coat
  • Optimal balance between strength and weight
  • Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
  • Skidplate not currently compatible with a diff drop kit – you would have to space it down
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Compatible with All-Pro 2010+ 4Runner Front Bumpers
  • Not tested with KDSS Vehicles
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Installation Instructions

  $440.00 Add to cart
• 

  • 
  • 
  • 

  Skid Plates + Sliders - 5th Gen 4Runner

  Ships FREE !!
  within 48 US States

  All Pro 5th Gen 4Runner IFS Skid Plate – Bare Steel

  • Suits 2010-2024 Toyota 4Runner 5th Gen
  • Covers from the front bumper down to the first cross member
  • 3/16-inch steel – Bare Steel – needs to be painted before installation
  • Optimal balance between strength and weight
  • Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
  • Skidplate not currently compatible with a diff drop kit – you would have to space it down
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Compatible with All-Pro 2010+ 4Runner Front Bumpers
  • Not tested with KDSS Vehicles
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Installation Instructions

  $380.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A685 3-Way Adjustable MRA Rear Shocks | 80 Series 6″ Lift

  • Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 6″ of lift
  • 3-way adjustable valving – Adjust high and low speed compression and rebound
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • 714mm extended, 440mm compressed
  • Installation Instructions of the MRA Shocks

  $1,350.00 Add to cart