Your cart is currently empty!
within 48 US States
All Pro 2005-2023 Toyota Tacoma Rock Sliders
- Suits 2005-2023 Toyota Tacoma Access Cab Long Bed, Dual Cab Short Bed and Dual Cab Long Bed
- SIGNATURE “KICK-OUT” DESIGN
- All Pro Offroad Tacoma Rock Sliders have been trail tested on some of the most grueling trails around, from the Rubicon to the Hammers
- Rock Sliders mount with the included grade 8 hardware including countersunk bolts that are flush with the bottom surface, since exposed bolt heads can be easily mangled by rocks
- All-Pro Rock Sliders are made from heavy duty 1.75” x .120” Steel Tube and 2″ square tube
- The shape of our Tacoma Rock Sliders is very critical and determines how much body protection it will provide as well as how the truck slides along the obstacles without getting hung up
- The outer tubes of the Tacoma Rock Sliders are 1.75″ diameter, and angle upward to provide maximum ground clearance and door protection
- All-Pro Rock Tacoma Rock Sliders not only look great but can be used as a lift point, easily holding the full weight of the vehicle.
- Made from hefty 1.75” x .120 wall DOM steel tubing with 2” square legs that are fully gusseted
- MADE IN THE USA
- INSTALLATION INSTRUCTIONS
$1,099.00
In StockDescription
2005-2023 Toyota Tacoma Rock Sliders
All-Pro Tacoma Rock Sliders are made from heavy duty 1.75” x .120” Steel Tube. Our Tacoma Rock Sliders feature an innovative, one-piece mounting plate that runs down the frame, adding support to the weaker C-channel portion of the Tacoma’s frame while allowing for an easier bolt-on installation. Tacoma Rock Sliders mount with the included grade 8 hardware including countersunk bolts that are flush with the bottom surface, since exposed bolt heads can be easily mangled by rocks. Pinch flange notching may be required due to slight variations between vehicles, and minimal drilling is needed for proper installation.
For the Tacoma rock sliders legs, All-Pro uses fully gusseted 2″ square legs due to their higher resistance to bending when compared to round tubing. In fact, the square legs are 1.7 times more resistant to bending than our 2″ round legs. To get the equivalent strength out of round tubing, 3″ would have to be used, and there simply isn’t enough room to do that. The legs run from the mounting points to the outer structure and are one of the most important parts of the slider to ensure a long life without the worry of bending. The square legs are more expensive, but the extra cost pays off for the user for years to come. The square tubing also provides more surface area to be welded to the mounting plate which, again, just adds to the overall strength.
Available bare metal or finished in black powder coat. Choose your finish.
Vehicle Suitability:
2005 Toyota Tacoma Sliders
2006 Toyota Tacoma Sliders
2007 Toyota Tacoma Sliders
2008 Toyota Tacoma Sliders
2009 Toyota Tacoma Sliders
2010 Toyota Tacoma Sliders
2011 Toyota Tacoma Sliders
2012 Toyota Tacoma Sliders
2013 Toyota Tacoma Sliders
2014 Toyota Tacoma Sliders
2015 Toyota Tacoma Sliders
2016 Toyota Tacoma Sliders
2017 Toyota Tacoma Sliders
2018 Toyota Tacoma Sliders
2019 Toyota Tacoma Sliders
2020 Toyota Tacoma Sliders
2021 Toyota Tacoma Sliders
2022 Toyota Tacoma Sliders
2023 Toyota Tacoma Sliders
ALL-PRO products are warranted to be free from defects in materials and workmanship prior to installation. Any alteration, improper use, or modification will void this warranty. This warranty is extended by All-Pro to the original purchaser. This warranty is effective for 90 days from the date of purchase. Any description of the goods is for the sole purpose of identifying them, is not a part of the bargain, and does not constitute a warranty that the goods will conform to that description. Any sample, model or advertised item is for illustrative purposes only, is not part of the basis for the bargain, and is not to be construed as a warranty that the good will conform to the sample, model, or advertised item. No affirmation of fact or promise made by All-Pro will constitute a warranty that the goods will conform to the affirmation or promise.
Purchasers and users of our products are responsible for determining the applicability of a product to their specific application. In the event of a defect, malfunction, or failure to conform to this warranty, All-Pro will repair or replace the goods without charge within 30 days of receipt of goods. If All-Pro is unable to replace and/or repair the goods or if All-Pro, at its sole discretion, determines that neither option is commercially practicable or cannot be made within 30 days of receipt of the goods, All-Pro will refund the purchase price. The purchaser is responsible for installation and removal of all parts, freight or shipping costs, and incidental or consequential damages.
AP-306637
TOYOTA TACOMA ACCESS CAB LONG BED or DOUBLE CAB SHORT BED
(2005-2023)
AP-306638
TOYOTA TACOMA DOUBLE CAB LONG BED
(2005-2023)
3 reviews for All Pro 2005-2023 Toyota Tacoma Rock Sliders
You must be logged in to post a review.
Related products
-
Suspension
Dobinsons Tacoma Lift Kit for 2005-2023 4×4 (all options)
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Long bed models require the next step up in leaf spring, or they will sit 1″ less high. L59-110-R lift only 1″ on long bed models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight and desired lift height
- Multiple different leaf springs options to match up with the added weight you’ve put on your truck or not
- Choose from classic Twin Tube Shocks, IMS Monotube, or MRA 3-Way Adjustable Remote Resi Shocks
- Read this to learn about the shock differences – Shock Types
- Base kit usually starts with front coils, struts, rear leaf springs, poly bush kit, rear shocks, 1 pair greasable pins. You choose what you want
- Common installation instructions related to parts on this page
Rated 5.00 out of 5(12 reviews) -
Dobinsons
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
Rated 5.00 out of 5(12 reviews) -
Suspension
Dobinsons High Clearance Outer CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Complete OUTER kit includes 2 new OUTER boots, grease, and required clips – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
- Inside shape is round
- These still install the old fashioned way without custom stretch boot tools needed
- Installation Instructions
- Link to Inner Boot Kit
Rated 5.00 out of 5(19 reviews) -
Tacoma 3rd Gen (2016-2023)
Dobinsons Tacoma L59-112-R Heavy Duty Leaf Springs Pair for 2005-2023 (800-1200LBS)
- Suits Toyota Tacoma 2005-2023, lifts 2-2.25″ with at least 800LBS of constant load on the rear end
- Sold in pairs
- Each pack has 7 leaves
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Click here for Extra Leaf Kit for additional load support
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
Rated 5.00 out of 5(10 reviews)
James (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Nathan (verified owner) –
Very good customer service, super friendly.
Steven (verified owner) –
Very fast delivery.