Apache Offroad HD Chromoly Rear Adjustable Sway Bar Links 4Runner FJ Cruiser GX470 GX460

FREE SHIPPING
within 48 US States

Apache Offroad HD Chromoly Adjustable Sway Bar Links | 3rd Gen 4Runner 1996-2002

Name: Apache Offroad HD Chromoly Adjustable Sway Bar Links | 3rd Gen 4Runner 1996-2002
Brand: Apache Offroad
SKU: AO-SBL1R-1
Availability: InStock
Rating: 5.00 (10 reviews)

Rated 5.00 out of 5 based on 10 customer ratings

(10 customer reviews)

Suits 3rd Gen Toyota 4Runner 1996-2002, Prado 90 Series, Front or Rear
Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
Order 1 for 1 vehicle
Adjustable (on vehicle) from 165mm – 206mm – Requires at least 1″ of lift if used in the front and 2″ in the rear.
Custom Forged Oversized (22mm ball) Chromoly Rod End / Joints
Premium Silicone Dust Boots
High Carbon Steel Center Link
Black EDP Coating for corrosion resistance
High Quality Polyurethane Bushings on frame side
Serrated Oval / Distorted Thread Locking Nut – The factory sway bar material expands and contracts as you drive, thus causing the nut to come loose and the sway bar link to disconnect. This is not ideal. This style nut, is the best solution we have found to the issue, though we do still recommend the use of thread locker at install.
Mounting hardware included
Rod end machined to accept hex key to prevent the rod end from spinning during installation. Other brands come with a nut on the inner side of the shaft, which is harder to use and more likely to cause you to tear the boot upon installation.
Sold as a pair
Maintenance Free Design
2 year unlimited mile warranty

$205.00

In Stock

SKU: AO-SBL1R-1 Categories: 4Runner 3rd Gen (1996-2002), Apache Offroad, Caster and Alignment, Exceptions, Performance Upgrades - 3rd Gen 4Runner, Prado 90 + 95 - RZN VZN KZN KDJ (1996-2002), Suspension, Sway Bar Links + Brackets Tags: bar, link, sway, swaybar Brand: Apache Offroad

Description
Reviews (10)

Description

The Apache Offroad HD adjustable sway bar links were engineered to create a strong link between your sway bar and frame, as well as, correct your sway bar alignment post lift install. Over the years we have noticed that some customers have broken the studs in their links, causing potentially catastrophic failure to other components on the vehicle. Thus leading to the creation of our HD chromoly link set.

By positioning the sway bar to a neutral position you are able to maximize travel and handling of your vehicle.

Adjustable (on vehicle) from 165mm – 206mm – Requires at least 1″ of lift if used in the front and 2″ in the rear.
Custom Forged Oversized (22mm ball) Chromoly Rod End / Joints
Premium Silicone Dust Boots
High Carbon Steel Center Link
Black EDP Coating for corrosion resistance
High Quality Polyurethane Bushings on frame side
Serrated Oval / Distorted Thread Locking Nut – The factory sway bar material expands and contracts as you drive, thus causing the nut to come loose and the sway bar link to disconnect. This is not ideal. This style nut, is the best solution we have found to the issue, though we do still recommend the use of thread locker at install.
Mounting hardware included
Rod end machined to accept hex key to prevent the rod end from spinning during installation. Other brands come with a nut on the inner side of the shaft, which is harder to use and more likely to cause you to tear the boot upon installation.
Sold as a pair
Maintenance Free Design.
2 year unlimited mile warranty

Note- If you lose a nut- the frame side is size m12x1.25 and the stud / sway bar side is size is m12x1.5 / The locking nut going into the center link is 1/2″-20

Torque specs: We recommend using factory torque specs

Fitment:

1996-2002 TOYOTA 4RUNNER (3RD GEN)
1996-2002 TOYOTA LAND CRUISER PRADO 90 SERIES

Installation Help:

Installation is quite simple. Remove the factory sway bar link, and install the Apache link. With the vehicle on the ground, at ride height, Adjust the sway bar link until the angle of the sway bar is running in parallel with the lower trailing arm (link.) You also want your sway bar end ball stud to stick out straight. When installed correctly the link should not look like its being pulled to the rear. Be sure to tighten both upper locking nuts as well as the rod end locking nut against the center link. Apply thread locker to nuts and torque to factory spec.

Vehicle Fitment:

1996 Toyota 4Runner
1997 Toyota 4Runner
1998 Toyota 4Runner
1999 Toyota 4Runner
2000 Toyota 4Runner
2001 Toyota 4Runner
2002 Toyota 4Runner

1996 Toyota Land Cruiser Prado 90
1997 Toyota Land Cruiser Prado 90
1998 Toyota Land Cruiser Prado 90
1999 Toyota Land Cruiser Prado 90
2000 Toyota Land Cruiser Prado 90
2001 Toyota Land Cruiser Prado 90
2002 Toyota Land Cruiser Prado 90

10 reviews for Apache Offroad HD Chromoly Adjustable Sway Bar Links | 3rd Gen 4Runner 1996-2002

Rated 5 out of 5

Scott (verified owner) – March 29, 2020

Great description on the page, easy to understand what I was buying.
Rated 5 out of 5

Richard (verified owner) – January 25, 2021

5 Stars!!
Rated 5 out of 5

Jonathan (verified owner) – May 1, 2022

Value for money, super satisfied.
Rated 5 out of 5

Kevin (verified owner) – May 20, 2023

Value for money, super satisfied.
Rated 5 out of 5

Kenneth (verified owner) – July 3, 2023

Spoke with Mike, he got me headed in the right direction for what I need.
Rated 5 out of 5

Paul (verified owner) – October 21, 2023

It’s exactly what I wanted.
Rated 5 out of 5

John (verified owner) – December 18, 2023

Spoke with Mike, he got me headed in the right direction for what I need.
Rated 5 out of 5

Kevin (verified owner) – February 8, 2024

Good quality, really nice.
Rated 5 out of 5

Ryan (verified owner) – March 5, 2024

Very fast delivery.
Rated 5 out of 5

Timothy (verified owner) – September 4, 2024

Spoke with Mike, he got me headed in the right direction for what I need.