Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
ARB RD152 Rear Air Locker Toyota 9.5″ 32 Spline
- For Use only with Toyota 9.5″ 12 Bolt 32 spline Rear Axle
- Suits multiple vehicles, the full list is down below
- Will not suit 5.7L Tundra engines, as they use a larger rear differential (RD146)
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
$1,113.95
In Stock
EAN: 9332018002853
SKU: RD152
Categories: 100 Series Land Cruiser IFS (1998-2007), 200 Series Land Cruiser (2008-2021), 71 Series - GRJ71 HZJ71 2009+, 76 Series - FZJ76, HZJ76, VDJ76 - 2007+ (Station Wagon), 78 Series - FZJ78, HZJ78, VDJ78 (Troop Carrier), 79 Series - FZJ79, HZJ79, HDJ79, VDJ79, GRJ79 (Pickup), ARB, ARB Air Lockers, Differential | Drivetrain, LX470, Performance Upgrades - 100 Series, Performance Upgrades - 200 Series, Performance Upgrades - Tundra 2nd Gen, Tundra 2nd Gen (2007-2021)
Brand: ARB
Description
ARB RD152 Rear Air Locker
ARB RD152 Rear Air Locker Toyota 9.5″ 12 Bolt 32 spline is made for the multiple Toyota vehicles, listed below
The ARB RD152 Toyota 9.5″ 12 Bolt 32 spline Air Locker for all gear ratios, can instantly lock differentials and allow you to tackle the toughest off-road terrain. The world’s best traction aid, ARB Air Lockers keep you moving in all conditions.
Air Lockers from ARB are currently available in over 100 configurations to suit a wide range of off-road and 4×4 vehicles from around the world. Because an air locker is only engaged when needed, it can be installed in BOTH the front and rear axles, with separate switches independently controlling the RD146 air locker from within the off-road truck or vehicle.
Installation of the ARB RD152 air locker should be performed by a qualified differential technician, although no special tools or skills are required apart from those necessary for fitting a standard differential. When installed with an ARB air compressor (high output or mini), the ARB RD152 – Toyota 9.5″ 12 Bolt 32 spline locker system is supplied as a complete kit which contains all of the parts necessary for proper installation, including industrial grade control switches, air lines and fittings. ARB offers two compressor models suitable for Air Locker operation (high output air compressor or mini air compressor). A dedicated air activation system is available which is extremely durable and compact. Alternatively a larger compressor can be specified, which is also perfect for inflating tires, air mattresses and a host of other applications where compressed air is required.
ARB RD152 Vehicle Fitment – All gear ratios
Toyota Tundra 4.6L V6 and 4.7L V8 REAR 2007 to 2021 (will not suit the larger 5.7L rear ends)
Toyota Landcruiser 200 Series REAR 2007 onwards
Lexus LX570 REAR 2007 onwards
Toyota Landcruiser 71, 76, 78, 79, 100 and 105 Series REAR (without OE locker)
Additional information
| Weight | 30 lbs |
|---|
16 reviews for ARB RD152 Rear Air Locker Toyota 9.5″ 32 Spline
You must be logged in to post a review.
Related products
-
SuspensionFREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRA Front Struts Pair | Land Cruiser 200 Series
- Suits 2008-2021 Toyota Land Cruiser 200 Series
- Adjuster rings on strut body are black, not purple
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- Height adjustable with a fully threaded body
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Reservoir mounting installation
- Must mount the banjo fitting and hose inwards to engine on MRA struts
(18 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60682 Rear 2.6″ IFP Shocks Pair | Sequoia + Land Cruiser 80/100/200 0-3″
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, 100 Series 1998-2007, and 200 Series Wagon 2008-2020, as well as 2001-2007 Sequoia for 0-3″ of lift
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- SOLD IN PAIRS
- 610mm extended, 389mm compressed
(14 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons PS59-4032 1/2″ Lift Alloy Strut Spacer | Land Cruiser Tundra Sequoia
- A 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Suits the following vehicles:
- Toyota Land Cruiser 200 Series – all years
- Toyota 300 Series Land Cruiser
- Lexus LX570 – all years
- Toyota Tundra – 2007 to 2021
- Toyota Tundra 2022+
- Toyota Sequoia – 2008 to 2022
- Toyota Sequoia 2023+
- Make sure you have enough threads on the studs of your strut mounts to add this 1/4″ thick spacer before ordering. Some top mounts have less thread length than others!!
(19 reviews) -
Armor
Dobinsons 200 Series Winch Bumper | Land Cruiser 200 Series 2008 to 8/2015
- Airbag and winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Brackets, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle
- Includes Turn Signals, Fog Lights, and all Required Hardware for Installation
- Includes filler panels for under the headlights to fill the gap to the bumper. Old bumper cover does not get cut or get reused
- Separate Winch Cradle System, making installation faster
- Parking sensor, front camera and radar compatible (can’t mount parts in front of them)
- Cannot reuse headlight washers with this bumper
- Supplied Black, but can be painted by your paint shop
- Suits 12000 LB Low Mount Winches with non-integrated control box
- Installation instructions
- Ships to the nearest freight terminal for pickup, unless you add the home delivery fee below. We will be in touch to let you know the terminal location
(4 reviews)
Robert (verified owner) –
Great description on the page, easy to understand what I was buying.
Anthony (verified owner) –
Very good customer service, super friendly.
Robert (verified owner) –
Value for money, super satisfied.
John (verified owner) –
Very fast delivery.
Bryan (verified owner) –
Value for money, super satisfied.
James (verified owner) –
Would definitely buy from this site again.
Kenneth (verified owner) –
Very fast delivery.
Stephen (verified owner) –
Great description on the page, easy to understand what I was buying.
Justin (verified owner) –
Would definitely buy from this site again.
Brandon (verified owner) –
This is my go-to now for off road parts.
Andrew (verified owner) –
5 Stars!!
Jeffrey (verified owner) –
It’s exactly what I wanted.
Timothy (verified owner) –
Just what I needed.
David (verified owner) –
I received it really fast.
Jeremy (verified owner) –
Value for money, super satisfied.
Stephen (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.