DOBINSONS BS59-560 FRONT ADJUSTABLE BUMP STOP PAIR

Dobinsons BS59-560 Front Adjustable Bump Stop Pair

Adjustable front soft hit bump stop made from high quality rubber
Suits 0-30mm Extension
The BS59-560 rubber only is 1-3/8″ (35mm) thick, and the included spacers are 5, 10, 20mm
Sold as a pair, replacing two front bump stops
Ideal for those who bottom out often in their offroad driving
Suits Tacoma, 4Runner, GX470, GX460, 200 Series & more (see below for full vehicle list)
Installation Instructions

$170.00

In Stock

EAN: 9332670064664 SKU: BS59-560 Categories: 200 Series Land Cruiser (2008-2021), 300 Series Land Cruiser (2021+), 4Runner 4th Gen (2003-2009), 4Runner 5th Gen (2010-2024), Brake Lines + Bump Stops - 4th Gen 4runner, Brake Lines + Bump Stops - 5th Gen 4Runner, Brake Lines + Bump Stops - FJ Cruiser Early, Brake Lines + Bump Stops - FJ Cruiser Late, Brake Lines + Bump Stops - Lexus GX460, Brake Lines + Bump Stops - Lexus GX470, Brake Lines + Bump Stops - Tacoma 2nd Gen, Brake Lines + Bump Stops - Tacoma 3rd Gen, Bump Stops, Bump Stops - 200 Series, Bump Stops - Tundra 2022+, Dobinsons, FJ Cruiser Early (2006-2009), FJ Cruiser Late (2010-2014), Frontier D40, Frontier D41 2022+, GX460 (2010-2023), GX470 (2002-2009), Hilux Revo (2016+), Hilux Vigo (2005-2015), Pathfinder R51 (2005-2012), Performance Upgrades - 200 Series, Performance Upgrades - Sequoia 1st Gen, Performance Upgrades - Sequoia 2nd Gen, Performance Upgrades - Sequoia 3rd Gen, Performance Upgrades - Tundra 2nd Gen, Ranger 2019+ (US Spec), Sequoia 1st Gen (2001-2007), Sequoia 2nd Gen (2008-2022), Sequoia 3rd Gen (2023-2024+), Suspension, Tacoma 2nd Gen (2005-2015), Tacoma 3rd Gen (2016-2023), Tundra 1st Gen (2000-2006), Tundra 2nd Gen (2007-2021), Tundra 3rd Gen (2022-2024) Tags: bump, bumpstop, extension, stop Brand: Dobinsons Spring & Suspension

Description

Description

Dobinsons BS59-560 is sold as a pair, need 1 pair per vehicle.

Whenever adding bigger tires, or doing a full suspension kit on an older vehicle, the original bump stops may be damaged, missing, or just not suitable. These Dobinsons adjustable height soft-hit bump stops are the answer, allowing you to set the bump stop clearance height to the axle with the supplied steel spacers, stackable from 0-30mm Extension.

The BS59-560 rubber only is 1-3/8″ (35mm) thick, and the included spacers are 5, 10, 20mm

Dobinsons BS59-560 Bump Stop Kit Suits the following range of vehicles:

Lexus GX470 and GX460
Toyota Tacoma 2nd and 3rd Gen
Toyota 4Runner 4th and 5th Gen
Toyota FJ Cruiser – all years
Toyota Land Cruiser 200 series
Toyota Land Cruiser 300 Series
Toyota Hilux Vigo and Revo
Toyota Tundra 1st/2nd/3rd Gen and Sequoia 1st/2nd Gen
Toyota Tundra 2022+
Nissan Frontier D40 and D41
Nissan Pathfinder R51
Hilux Vigo
Hilux Revo
Toyota Sequoia
Toyota Tundra
Ford Ranger

When driving hard off road, it’s extremely common to come across some uneven terrain too quickly and risk bottoming out the front end. The easiest damage that can happen from doing this is if you bottom out the front struts. This hard impact can have really negative long term effects on the seals in the front struts, and repeated bottoming out can lead to early failure far sooner than what they were intended to do. By setting the correct amount of bump stop clearance up front, your bump stops will properly bottom out on the front lower control arms before the strut has a chance to hit full compression, therefore saving some life out of it. These Dobinsons BS59-560 bump stops come with multiple spacers (they look like washers) so that you can stack them accordingly and add the correct amount of additional spacing to your bump stop to compensate for the lifted height you are running at and the additional travel your struts have. Aftermarket struts with a longer compressed length than stock should be running longer bump stops so that they bottom out at the appropriate time.

Vehicle Suitability: