Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Bilstein 5100 Shock Kit for FJ Cruiser 2006-2009
From $544.00
In StockFront 5100 Struts (Pair)
Rear 5100 Shocks (Pair)
SKU: 5100KITFJC06-09
Categories: Bilstein, Early FJ Cruiser (2006-2009), Full Suspension Kits, Full Suspension Kits - FJC Early, Struts + Shocks - FJ Cruiser Early, Struts and Shocks, Suspension
Brand: Bilstein
Description
SPECIFICATIONS FOR FRONT STRUTS
- Bilstein | Part Number: 24-324359
- Collapsed Length (in.) 17.030
- Extended Length (in.) 22.560
- Travel Length (in.) 5.53
- Shaft Diameter: 14mm
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 46mm ID snap ring grooved body (Coilover)
- Internal Design: Mono tube
- Boot Included: Yes
- Not for X-REAS suspension
- NO TOP BUSHINGS OR WASHERS ARE INCLUDED – USE THIS KIT
- Reuse original coil spring
- Installation Instructions
- WARRANTY INFORMATION
SPECIFICATIONS FOR REAR SHOCKS
- Bilstein | Part Number: Bilstein 33-313146
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 23.03 Inch
- Compressed Length (IN): 14.91 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Eyelet
- Body Color: Silver
- Quantity: Single
- With Reservoir: No
- Includes Dust Shield: No
- Includes Hardware: No
- Includes Boot: Yes
- Estimated Install Time (Hours): 0.5
- WARRANTY INFORMATION
Bilstein 5100 PRODUCT OVERVIEW
Bilstein 5100 Series Bilstein Ride Height Adjustable Shock Absorbers are designed for front coilover style pickup suspensions. The monotube shocks feature a 46mm digressive piston with self-adjusting deflective disc valving. Multiple snap-ring grooves in the shock body allow for different spring seat positions, providing 0″-2.5″ of front end lift, depending on application. Provides increased wheel travel and improved handling! (zinc-plated steel body, Triple-C-Technology coating)
Bilstein 5100 KIT FITS THE FOLLOWING:
- 2006-2009 Toyota FJ Cruiser
MANUFACTURER
While the ThyssenKrupp Bilstein Company began as a German enterprise, Bilstein shocks are developed and manufactured in Hamilton, Ohio. Bilstein develops and fabricates premium quality monotube shock absorbers directly for automobile manufactures, aftermarket outfits and motorsports applications. The precision and craftsmanship in manufacturing that fueled company growth in Germany were brought straight to the factory in Hamilton, Ohio. The factory includes an engineering department, rigorous shock testing facility and a motorsports track. The track allows the engineers to tweak their designs in response to real world testing during development. The rigorous testing allows for designs to go through a machine simulated life of a shock absorber in all kinds of terrain conditions. The resulting products promise the highest in performance
Bilstein 5100s for Toyota FJ Cruiser 2006-2009
2006 Toyota FJ Cruiser Lift Kit
2007 Toyota FJ Cruiser Lift Kit
2008 Toyota FJ Cruiser Lift Kit
2009 Toyota FJ Cruiser Lift Kit
6 reviews for Bilstein 5100 Shock Kit for FJ Cruiser 2006-2009
You must be logged in to post a review.
You may also like…
-
Dobinsons
Dobinsons Strut Top Plates Pair | Tacoma 05-23 4Runner 03-24 FJ Cruiser GX470 GX460
- Suits Toyota Tacoma 2005-23, Toyota 4Runner 2003-24, Toyota FJ Cruiser (all years), Toyota Prado 120, Toyota Prado 150, Toyota Hilux 2005-2023, Lexus GX470, Lexus GX460
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Product comes exactly as shown in the photo
- Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
- Can also add the labor to have struts, coils, and these top mounts assembled, click here to add that
- Installation instructions
(18 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons IMS59-50220 Extended Travel Front 2.2″ IFP Struts Pair | Toyota & Lexus
- Suits 2nd and 3rd Gen Tacoma 2005-2023, 4th Gen 4Runner 2003-2009, Early FJ Cruiser 2006-2009, Lexus GX470 2003-2009
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS
- Adjustable height through fully threaded body
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
(15 reviews)
Related products
-
Dobinsons
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesETA is late DecemberDobinsons Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
- Replacement Ball Joints can be ordered here
(8 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
- Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
- You must choose what coils, shocks and other components you want to add
(13 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Rear Coils Options for Land Cruiser 80 Series 1990-1997 0-6″ Lift – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Choose what coil suits your vehicle and needs the best
- Any part number with a V in it means it’s a variable rate/progressive rate spring
- C59-221V – Stock height, variable rate
- c59-269V – 1.75″ Comfort ride spring with only stock weight (variable rate)
- C59-223V – 1.75″ lift with up to 220lbs weight (variable rate), 2.5″ with stock weight
- c59-169 – 1.75″ with up to 220lbs weight
- c59-171 – 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
- C97-147VT – 2.5″ lift with 440lbs weight (lifts more with less weight), (variable dual rate long travel)
- c59-167 – 2.5″ with up to 220lbs weight, 2″ with 440lbs weight
- c59-185 – 3″ lift with up to 220LBS weight, 2.5″ with 500LBS, 2″ with 800LBS
- C59-153 – 3″ lift with 880LBS constant rear load
- C59-613V – 3″ lift with up to 200 LBS (Flexi coils, variable rate)
- C97-145VT – 3.5″ lift with 400LBS+ heavy load rear (variable dual rate long travel)
- C59-615V – 4″ lift with up to 200 LBS (Flexi coils, variable rate)
- c59-309 – 4″ lift with 110-220lbs weight
- c59-313 – 4″ lift with 400-750lbs weight
- c59-317 – 6″ lift with stock weight
- c59-319 – 6″ lift with 200LBS constant weight
- C59-311 – 6″ lift with 880LBS constant weight
- Sold in Pairs
- Click HERE to see the FRONT coil options
- Lift heights may vary depending on the age of the vehicle, and all accessories and weight added to it
(6 reviews)
Chad (verified owner) –
Great description on the page, easy to understand what I was buying.
Jose (verified owner) –
Very good customer service, super friendly.
Jeffrey (verified owner) –
Very fast delivery.
Aaron (verified owner) –
Value for money, super satisfied.
Benjamin (verified owner) –
Very good customer service, super friendly.
Ryan (verified owner) –
It’s exactly what I wanted.