Dobinsons IMS IMS59-50220 UCA59-003K installed on Tacoma credit 1madmnky

dobinsons IMS specifications specs sheet

FREE SHIPPING
within 48 US States

Dobinsons 1.5-3.5″ Pre-Assembled IMS FJ Cruiser Coilovers for 2006-2009

Name: Dobinsons 1.5-3.5" Pre-Assembled IMS FJ Cruiser Coilovers for 2006-2009
SKU: FJCEARLYIMSCOILOVERS
Availability: InStock
Rating: 5.00 (4 reviews)

Rated 5.00 out of 5 based on 4 customer ratings

(4 customer reviews)

Suits Toyota FJ Cruisers from 2003-2009 4×4 Models
Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
Select your desired lift height and load rate – we’ll take care of the rest!!
Dobinsons IMS are height adjustable by a fully threaded body
The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
Fully rebuildable and re-valvable
Extended Travel – 567mm extended, 417mm compressed
SOLD IN PAIRS – READY TO BOLT IN
Zero shock fade in all terrains with full load
Direct, bolt-on replacement for easy fitment
IFP – Internal Floating Piston, separates oil and nitrogen
Corrosion resistant (EDP Surface Protection)
Heavy duty single piece lower leg
Enormous oil capacity
Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
Full 2 year limited warranty, no set rebuild time period
Photos for illustration purposes
Instructions for setting coil seat height
Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
Link to Matching rear shocks
Please NOTE: Assembled coilovers cannot be returned, as they are made to order

$1,195.00

In Stock

Select Coil Spring Color *

Coil spring color is subject to availability (call or email to check). Choose your preferred color here, and if that is not available, we will contact you with an ETA or other options.

Added Front End Weight? *

Let us know how much added weight you have on the FJ (bumper, winch, skid plates, etc.) so that we can choose the appropriate springs for you

Select Lift Height *

Leave a note during checkout if you have a special request for the lift height, and/or if your front end is a lot heavier than normal (aka 300LBS of added weight)

SKU: FJCEARLYIMSCOILOVERS Categories: Coilovers, Dobinsons, Early FJ Cruiser (2006-2009), Full Suspension Kits - FJC Early, Struts + Shocks - FJ Cruiser Early, Suspension Tags: ims59-50220, sc59-001 Brand: Dobinsons Spring & Suspension

Description
Reviews (4)

Description

Dobinsons IMS FJ Cruiser Coilovers set for Toyota FJ Cruiser 2006-2009 4×4 models, this setup allows you to choose what color, load rating and lift height you want your Dobinsons IMS set to, so that they can bolt right into your rig. Lift your FJ Cruiser 2″, 2.5″ or 3″ and bolt in these Dobinsons IMS FJ Cruiser Coilovers to gain a significant ride quality improvement over your stock suspension, while getting that necessary added ground clearance under the front end of your IFS vehicle. Just don’t forget, the more lift you add, the more other parts that also should be added for geometry correction.

Link to Youtube video: https://youtu.be/Npfx40VD3kM

Dobinsons IMS FJ Cruiser Coilovers – IMS Monotube IMS59-50220 Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilising the Monotube design, Dobinsons IMS59-50220 Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.

The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.

The micro-polished, hard chromed and heat treated shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.

Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

All Dobinsons™ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

2006 Toyota FJ Cruiser Lift Kit
2007 Toyota FJ Cruiser Lift Kit
2008 Toyota FJ Cruiser Lift Kit
2009 Toyota FJ Cruiser Lift Kit
2006 Toyota FJ Cruiser Coilovers
2007 Toyota FJ Cruiser Coilovers
2008 Toyota FJ Cruiser Coilovers
2009 Toyota FJ Cruiser Coilovers

4 reviews for Dobinsons 1.5-3.5″ Pre-Assembled IMS FJ Cruiser Coilovers for 2006-2009

Rated 5 out of 5

Bryan (verified owner) – August 8, 2022

Exit Offroad really does know what they’re talking about, they have the best product pages.
Rated 5 out of 5

Sean (verified owner) – February 8, 2023

Would definitely buy from this site again.
Rated 5 out of 5

Jeremy (verified owner) – July 29, 2023

*****
Rated 5 out of 5

Jacob (verified owner) – November 1, 2023

Very good customer service, super friendly.