Your cart is currently empty!
Dobinsons 15mm Rear Spacer | 2022+ Tundra Sequoia LC300 Tacoma
- Suits 2022-2024+ Toyota Tundra, 2023-2024+ Toyota Sequoia, 2022+ Toyota Land Cruiser 300 Series, 2024+ Toyota Tacoma
- High Quality Polyurethane, maintains height over time
- Fits on top of coil spring, below the OE isolator
- Sold as 1 piece
- Lasts longer than rubber
- Easy to add lift height to correct for vehicle lean
- Adds 15mm (0.6″) of rear lift
- Photo for illustration purposes
- There’s also a front spacer option
$40.00
In Stock
Description
This is a single rear poly coil spacer to help correct for vehicle lean once a vehicle has been lifted, if a lean exists. It is 15mm (0.6″) thick. This will add the same amount of lift as its thickness to help level up the vehicle. These CANNOT be stacked, only 1 can be used per coil spring.
While some people have an issue with a spacer, they need to remember that to level a vehicle out from left to right, a shim like this is what is normally used. A shim and a small spacer are the same thing, specifically to level out the vehicle. A “coil spacer lift kit” that many brands sell are offered to cheaply add height to a vehicle by using 1″, 2″, or sometimes 3″ thick spacers on top of original suspension, but that’s not the objective here.
This rear spacer will suit all rear coil springs that use the factory top rubber coil spring isolator, for these vehicles:
2022-2024+ Toyota Tundra
2023-2024+ Toyota Sequoia
2022+ Toyota Land Cruiser 300 Series
2024+ Toyota Tacoma
Remember: New Toyota vehicles come with a 1/4″ to 1/2″ lean from the factory, so anything within that range is considered “OK”.
To see coil springs these can work with, click here:Â https://exitoffroad.com/product-category/suspension/coil-springs/
Vehicle Fitment:
2022 Toyota Tundra
2023 Toyota Tundra
2024 Toyota Tundra
2023 Toyota Sequoia
2024 Toyota Sequoia
2022 Toyota Land Cruiser 300 Series
2023 Toyota Land Cruiser 300 Series
2024 Toyota Land Cruiser 300 Series
2024 Toyota Tacoma
2025 Toyota Tacoma
6 reviews for Dobinsons 15mm Rear Spacer | 2022+ Tundra Sequoia LC300 Tacoma
You must be logged in to post a review.
You may also like…
-
200 Series Land Cruiser (2008-2021)Dobinsons PS59-4032 1/2″ Lift Alloy Strut Spacer | Land Cruiser Tundra Sequoia
- A 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Suits the following vehicles:
- Toyota Land Cruiser 200 Series – all years
- Toyota 300 Series Land Cruiser
- Lexus LX570 – all years
- Toyota Tundra – 2007 to 2021
- Toyota Tundra 2022+
- Toyota Sequoia – 2008 to 2022
- Toyota Sequoia 2023+
- Make sure you have enough threads on the studs of your strut mounts to add this 1/4″ thick spacer before ordering. Some top mounts have less thread length than others!!
(19 reviews)
Related products
-
Dobinsons
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
(12 reviews) -
Recovery
Dobinsons 4×4 Kinetic Snatch Tow Recovery Rope 28900 LBS (13100 KG) 30FT
- Rated at 28,900 LBS (13,100 KG), 7/8″ Diameter (22mm), 30FT Total Length
- UV & Water Resistant, made from High Quality 66 Grade Nylon
- Lightweight high strength Double Braided 24 Strand Design
- Spliced & Stitched End Loops with Protective Sleeves
- NATA Approved, Australian Laboratory Tested
(7 reviews) -
Rear Drawers
Dobinsons Rear Dual Roller Drawer Kit – 39 x 42 x 10 inches
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Universal Mount, measures 39 x 42 x 10 inches (L, W, H)
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
- Photos for illustration purposes and may not be actual size of product for this product page
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
(10 reviews) -
Recovery
Dobinsons 4×4 Tree Trunk Protector Strap for Winching 26000 LB (12000 KG)
- Rated at 26,000 LB (12,000KG)
- Length is 10FT (3M), and 3″ Strap Thickness
- Green in color to not confuse with Snatch Straps
- Rolls up small, compact, and easy to keep in the vehicle
(9 reviews)
Kevin (verified owner) –
5 Stars!!
Benjamin (verified owner) –
Very fast delivery.
Andrew (verified owner) –
Just what I needed.
Jonathan (verified owner) –
Would definitely buy from this site again.
Jesse (verified owner) –
Great description on the page, easy to understand what I was buying.
Jason (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.