Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Dobinsons 3″ IMS Suspension Kit for Jeep Wrangler JL 4-Door
- For 2018+ Jeep Wrangler JL 4 Door Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front IMS Monotube Shocks, 2 Rear IMS Monotube Shocks, and 4 Coil Springs – Select your preferences
- New front and rear track bars are recommended (not offered from Dobinsons)
From $1,810.00
In StockSelect Color of Coils
If your choice is not available, we will email you with other options or an ETA
Select Front Coils
C29-218V - Lifts 3" with stock front end weight
C29-224V - Lifts 3" with 100-200LB front end load (bumper, winch, etc)
C29-224V - Lifts 3" with 100-200LB front end load (bumper, winch, etc)
Front Shocks
Select Rear Coils
C29-219V - 3" Lift with Stock Weight
C29-239V - 3" Lift with 200-400LBS Rear End Weight
C29-239V - 3" Lift with 200-400LBS Rear End Weight
Rear Shocks
Front Steering Damper
Dobinsons SS29A844 Adjustable Monotube Steering Damper offers increased steering control and reduces unwanted steering forces in both directions normally found in conventional steering dampers.
Front Coil Isolators
Dobinsons has created a set of replacement polyurethane coil isolators to keep the coils nice and straight when lifted. When using variable rate coils on these Jeeps, they tend to bow out if these replacements aren't used
Front Sway Bar Links
At 3" of lift, the stock sway bar angle is out of alignment and inhibits proper articulation and comfort. Adding longer links corrects this. Required for 3" of lift
Rear Sway Bar Links
At 3" of lift, the stock sway bar angle is out of alignment and inhibits proper articulation and comfort. Adding longer links corrects this. Required for 3" of lift
Front Bump Stop Extensions
These are required to run with the Dobinsons shocks, unless you have some other bump stops in place already
Rear Bump Stop Extensions
The Dobinsons rear shocks will bottom out early if these bump stop extensions are not added
Front Adjustable Lower Control Arms
For heavy offroading, lower adjustable trailing arms help correct pinion angle, give better articulation, and are much much stronger than stock. Required for 3" of lift
Front Adjustable Upper Control Arms
Set the pinion angle and wheelbase properly as well as increase articulation when offroad
Rear Adjustable Lower Control Arms
Set pinion angle and wheelbase properly, also check the high clearance option
Rear Adjustable Upper Control Arms
Tying in with the lower arms, set pinion angle and wheelbase properly
Add New Front & Rear Bump Stops?
Teraflex front and rear progressive bump stops give a much better cushion and feel when bottoming out your Jeep. They're also 1.5" longer than OEM to prevent as much tire rubbing when running bigger than 35" tires
Rear Track Bar Bracket
When adding 2.5" or more of lift, the rear axle will be shifted to one side. This bracket takes care of it without requiring a new adjustable rear track bar
Front Track Bar
Allows you to re-center the axle once it has been lifted
Rear Track Bar
Allows you to re-center the axle once it has been lifted
Steering Upgrade
Rusty's all new steering link upgrade, includes everything you need to beef up the steering at the same time that you add the lift
Front Track Bar Brace
May as well do this while you're in there too, as the steering box is known to flex on the frame once bigger tires are added
SKU: IMSKITJL4DOOR
Categories: Dobinsons, Exceptions, Full Suspension Kits, Full Suspension Kits - JL Wrangler, JL Wrangler (2018-2024+), Suspension
Tag: ims
Brand: Dobinsons Spring & Suspension
Description
You have found the Dobinsons 3″ IMS Suspension Kit for Jeep Wrangler JL 4-Door. Dobinsons offers this complete suspension system for the 2018+ Jeep Wrangler JL 4-door, with various coil load options to suit whatever accessory weight you have added to your vehicle, and your desired lift height. You can start with a basic kit of 4 coils and IMS shocks, or you can build it up with as many options as you would like. Contact us directly if you have questions before ordering.
Dobinsons 3″ IMS Suspension Kit for Jeep Wrangler JL 4-Door is designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, our 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As we export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.
Dobinsons IMS Jeep monotube shock absorbers are designed for next level performance over twin tube shocks in those hot, harsh, demanding conditions. By utilizing the monotube design, Dobinsons IMS shock absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.
The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling. The micropolished, hard chromed and heat treat shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.
Composite piston wear bands, high quality Fuchs oil and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity without the need for frequent rebuilding or servicing. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping Characteristics in each IMS shock to ensure a balance of comfort, handling, vehicle control and off-road performance – Enjoy the ride
We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.
All Dobinsons 3″ IMS Suspension Kit for Jeep Wrangler JL 4-Door coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.
For 3″ of lift, the front and rear bump stop options should be selected so that you don’t bottom out your new shocks.
Check out more videos on our YouTube page: https://www.youtube.com/exitoffroad
Vehicle Fitment:
2018 Jeep Wrangler JL
2019 Jeep Wrangler JL
2020 Jeep Wrangler JL
2021 Jeep Wrangler JL
2022 Jeep Wrangler JL
2023 Jeep Wrangler JL
7 reviews for Dobinsons 3″ IMS Suspension Kit for Jeep Wrangler JL 4-Door
You must be logged in to post a review.
Related products
-
Suspension
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
(7 reviews) -
Dobinsons
Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(11 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesETA is late DecemberDobinsons Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
- Replacement Ball Joints can be ordered here
(8 reviews) -
4Runner 5th Gen (2010-2024)
Dobinsons GS59-701 Rear Shocks Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
- Pin top mount, eyelet lower mount
- Available in Yellow or Black
- Photos for illustration purposes
(6 reviews)$310.00 Select options This product has multiple variants. The options may be chosen on the product page
Ryan (verified owner) –
Good quality, really nice.
Christopher (verified owner) –
Would definitely buy from this site again.
Jeffrey (verified owner) –
Value for money, super satisfied.
John (verified owner) –
Value for money, super satisfied.
James (verified owner) –
*****
Travis (verified owner) –
Would definitely buy from this site again.
Justin (verified owner) –
This is my go-to now for off road parts.