Your cart is currently empty!
Dobinsons 200 Series Winch Bumper | Land Cruiser 200 Series 2008 to 8/2015
- Airbag and winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Brackets, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle
- Includes Turn Signals, Fog Lights, and all Required Hardware for Installation
- Includes filler panels for under the headlights to fill the gap to the bumper. Old bumper cover does not get cut or get reused
- Separate Winch Cradle System, making installation faster
- Parking sensor, front camera and radar compatible (can’t mount parts in front of them)
- Cannot reuse headlight washers with this bumper
- Supplied Black, but can be painted by your paint shop
- Suits 12000 LB Low Mount Winches with non-integrated control box
- Installation instructions
- Ships to the nearest freight terminal for pickup, unless you add the home delivery fee below. We will be in touch to let you know the terminal location
From $2,035.00
**Item is on Backorder**Add Driving Lights for the Top of the Bumper?
Adding a set of high quality driving lights will give you incredible viewing distance at night out on those dark roads and highways
Add Wiring Harness for Driving Lights?
The lights do not come with a wiring harness
Add a Winch?
Make the most of your Dobinsons winch bumper and add a new winch here
Add Home Delivery?
This bumper ships on a pallet. Home delivery adds an additional fee. If you don’t add this, it will ship to the nearest freight terminal for you to pick up.
**Item is on Backorder**
Email when stock is available
EAN: 9332670052418
SKU: BU59-3696
Categories: 200 Series Land Cruiser (2008-2021), Armor, Bumpers + Racks - 200 Series, Dobinsons, Excluded, Front Bumpers
Tag: bu59-3696
Brand: Dobinsons Spring & Suspension
Description
BU59-3696 200 Series Winch Bumper suits Toyota Land Cruiser 200 Series from 2008 to early 2015, specifically August and earlier built models. Post August models had a facelift with a new grille, headlights and front bumper design which uses a different bumper, BU59-3714.
Dobinsons 200 Series Winch Bumper BU59-3696 is manufactured from high quality structural steel, Dobinsons bull bars are CNC cut, bent and welded for accurate fitment, optimum strength and durability.
200 Series Winch Bumper Features vary by bumper model, but may include: Airbag and winch compatible, Driving light mounts, turn signal (Deluxe and Stainless bumpers only) and parking lights, Heavy duty black powder-coat finish, Dual re-enforced hi-lift jacking points, Dual aerial mounts, Polyurethane bumper overiders (deluxe and Stainless bumpers only), Re-enforced bull-bar wing tips, Separate winch cradle to chassis mounting system allows excess weight and load to be supported directly by the chassis, 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates (some models may not come with these), 51mm Upper loops on Classic Black and Classic Black Deluxe (60mm Land Cruiser 200 Series), 76mm center loop and 51mm side loops on Stainless Loop Deluxe models.
All Dobinsons BU59-3696 bumpers are supplied with a black finish. Stainless Loop Deluxe Bull Bars are supplied with a black finish and stainless steel loops. Some photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. Due to the additional weight when fitting a Bull Bar and/or Winch, the vehicle’s ride height will be lowered. We suggest replacing the springs with a matched pair of springs to suit the requirement.
This bullbar is also equipped with center and side protection plates for the underside of the bull bar. A crucial feature to help protect vital vehicle components when off-road driving.
Dobinsons BU59-3696 has a separate winch cradle to chassis mounting system allows the additional weight of the winch and winching load to be supported directly by the chassis.
NOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.
Don’t forget to also upgrade your suspension when adding constant weight like bumpers, winch, roof racks, etc
Vehicle Fitment:
2008 Toyota Land Cruiser 200 Series
2009 Toyota Land Cruiser 200 Series
2010 Toyota Land Cruiser 200 Series
2011 Toyota Land Cruiser 200 Series
2012 Toyota Land Cruiser 200 Series
2013 Toyota Land Cruiser 200 Series
2014 Toyota Land Cruiser 200 Series
2015 Toyota Land Cruiser 200 Series
Check out the matching rear bumper for the 200 Series from Dobinsons.
Dobinsons Rear Bumper for Toyota Land Cruiser 200 Series 2008-2021
4 reviews for Dobinsons 200 Series Winch Bumper | Land Cruiser 200 Series 2008 to 8/2015
You must be logged in to post a review.
You may also like…
-
LightingFREE SHIPPING
within 48 US StatesDobinsons 8.25″ Zenith 155 Watt LED Driving Light Pair with 12700 Raw Lumens
- 155w (9 – 32v DC), 210mm (8.25″) Diameter to fit most front aftermarket bumper designs
- 4 x 20 Watt 6000K Long Distance Center LED’s
- 15 x 5 Watt 6000K Spread Center LED’s
- 50,000+ Hours Life Span
- Highly resistant to vibration and corrosion
- IP68 Water and Dust Proof Rating
- 12,700 Raw Lumens Per Light, 25,400 Per Pair!!!
- Poly carbonate Smash Resistant Lens
- Heavy Duty Braced Steel Mount
- Wiring Harness sold separately (if needed)
(0 reviews)
Related products
-
200 Series Land Cruiser (2008-2021)
Dobinsons 200 Series Land Cruiser 1.0-2.5″ Lift Kit (all options)
- Suits Toyota Land Cruiser 200 Series from 2008 to 2021 Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
- FOR MRA STRUTS, BANJO FITTING ON LOWER STRUT FACES INWARDS TOWARDS ENGINE ON BOTH SIDES
- Reservoir mounting instructions for MRA struts, it’s the same for KDSS and non-KDSS
(9 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA59-A682 3-Way Adjustable MRA Rear Shocks Pair | 0-3″ Lift
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, 100 Series 1998-2007, and 200 Series Wagon 2008-2021, Sequoia 2001-2007, suitable for 0 – 3″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 620mm extended, 390mm compressed
- Installation Instructions of the MRA Shocks
(19 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-544 2.5″ Land Cruiser 200 Series Front Coils – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 455/450mm free height, 19mm wire, 580LB rate
- Sold as a Pair
(3 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
TimbrenFREE SHIPPING
within 48 US StatesTimbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2024 Tundra, 2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(12 reviews)
Stephen (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Anthony (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Joseph (verified owner) –
Very good customer service, super friendly.
Edward (verified owner) –
5 Stars!!