Dobinsons 80 Series Front Bump Stop Extensions Kit (1.0-2.0 in)

Name: Dobinsons 80 Series Front Bump Stop Extensions Kit (1.0-2.0 in)
SKU: BS59-608
Price: 150.00 USD
Availability: InStock
Rating: 5.00 (2 reviews)

Rated 5.00 out of 5 based on 2 customer ratings

(2 customer reviews)

Suits the Front of all Toyota Land Cruiser 80 Series from 1990 to 1997
1″ (25mm) extensions stackable up to two per spot for a total of 2″ (50mm) of thickness
Durable Solid Steel Spacers
Sold as a Kit for inner and outer rear bump stops
The inner goes inside the coil spring on the inner bump stop
The outer goes between the mount and the bump stop on the frame
Space down your bump stops to prevent shock bottom outs at full compression
Keep your tires out of your fenders if they’re oversized by spacing down the bump stops
General bump stop extension guidelines (will vary based on brand of shocks and bump stops used)
- Dobinsons 0-3″ lift shocks: Extensions are not necessary, unless running oversized tires
- Dobinsons 4-5″ lift shocks: Front needs about .5″ of bump stop extension, rear needs 2” of bump extension
- Dobinsons 6″ lift shocks: Front needs about 1.5” bump stop extension, rear needs a 3” extension or 2″ extension with extended length bump stops
We offer replacement bump stops as well Here

$150.00

In Stock

SKU: BS59-608 Categories: 80 Series Land Cruiser (1990-1997), Brake Lines & Bump Stops - 80 Series, Bump Stops & Spacers, Dobinsons, Suspension Brand: Dobinsons Spring & Suspension

Description
Reviews (2)

Description

Dobinsons 80 Series Front Bump Stop Extensions Kit is a set of solid steel spacers for the Front of a Toyota Land Cruiser 80 Series that can space down the outer and inner bump stops by 1″ (25mm) or 2″ (50mm) when stacked together. This is very important when running longer shocks for 3″ or more of lift where the shocks are longer at full compression than standard shocks. If you don’t space down the bump stops so that they engage before the shock bottoms out, then you risk blowing out the shocks. Dobinsons make a huge range of extended length shocks to suit 4″ and 6″ lift heights or long travel, and those all require bump stop extensions or extended bump stops so that the shocks don’t bottom out. This kit was made stackable so that the same kit can work for anyone without having to go searching for additional bits and pieces to get the correct bump stop gap.

Another feature of 80 Series Front Bump Stop Extensions and extending the bump stops is to restrict the amount of up travel the tires can go into the fenders, and possibly get cut up. If you’re running 35″ or larger diameter tires, you may need to restrict the up travel of the suspension so that the tires don’t hit certain parts of the body or frame at full articulation.

Suits the Front of all Toyota Land Cruiser 80 Series from 1990 to 1997
1″ (25mm) extensions stackable up to two per spot for a total of 2″ (50mm) of thickness
Durable Solid Steel Spacers
Sold as a Kit for inner and outer rear bump stops
The inner goes inside the coil spring on the inner bump stop
The outer goes between the mount and the bump stop on the frame
Space down your bump stops to prevent shock bottom outs at full compression
Keep your tires out of your fenders if they’re oversized by spacing down the bump stops
General bump stop extension guidelines (will vary based on brand of shocks and bump stops used)
- Dobinsons 0-3″ lift shocks: Extensions are not necessary, unless running oversized tires
- Dobinsons 4-5″ lift shocks: Front needs about .5″ of bump stop extension, rear needs 2” of bump extension
- Dobinsons 6″ lift shocks: Front needs about 1.5” bump stop extension, rear needs a 3” extension or 2″ extension with extended length bump stops
We offer replacement bump stops as well Here

2 reviews for Dobinsons 80 Series Front Bump Stop Extensions Kit (1.0-2.0 in)

Rated 5 out of 5

Brian (verified owner) – April 10, 2024

It’s exactly what I wanted.
Rated 5 out of 5

Joseph (verified owner) – April 22, 2024

It’s exactly what I wanted.

Add a review

You must be logged in to post a review.

You may also like…

80 Series Land Cruiser (1990-1997)
FREE SHIPPING
within 48 US States
Timbren ABSTOFLC1A Active Off Road Toyota 80 Series Front Bump Stops
- Suits Land Cruiser 80 Series and Lexus LX450
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- 1″ Extended Bump Stop over stock
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 1990 to 1997 Toyota Landcruiser 80 Series Front End
- NOTE: Some early model 80 Series didn’t come with the threaded holes in place in the frame. Adding nutserts may be required.
- Click here for instructions
Rated 5.00 out of 5
(13 reviews)
$269.36 Add to cart
Timbren
FREE SHIPPING
within 48 US States
Timbren Bump Stops Front & Rear | Land Cruiser 80 Series
- Suits 1990-1997 Land Cruiser 80 Series and Lexus LX450
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORLC1 replaces the rear OEM bump stops and ABSTOFLC1A replaces the fronts on the Land Cruiser 80 Series. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Clearancing of the rear brackets and the bump stop cups may be required on some long travel setups to avoid clearance issues with the coil springs
- Front Instructions and Rear Instructions
Rated 5.00 out of 5
(11 reviews)
$538.72 Add to cart
80 Series Land Cruiser (1990-1997)
FREE SHIPPING
within 48 US States
Timbren ABSTORLC1 Active Off Road Toyota 80 Series Rear Bump Stops
- Suits Land Cruiser 80 Series and Lexus LX450
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 1990 to 1997 Toyota Landcruiser 80 Series Rear End
- Overall kit height = 8.25”
- Total deflected (compressed) height = 6”
- Amount of deflection (compression) = 2.25”
- NOTE: Bolts into the frame. Adding nutserts may be required depending on frame condition
- Oversized coils and wide tires without much offset could possibly contact the bump stops
- Clearancing of the bracket and the bump stop cup may be required on some long travel setups to avoid clearance issues with the coil springs
- Click here for instructions
Rated 5.00 out of 5
(11 reviews)
$269.36 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Rear Bump Stop Extensions Kit (1.0-2.0 in)
- Suits the rear of all Toyota Land Cruiser 80 Series from 1990 to 1997
- 1″ (25mm) extensions stackable up to two per spot for a total of 2″ (50mm) of thickness
- Durable Solid Steel Spacers
- Sold as a Kit for inner and outer rear bump stops
- The inner goes inside the coil spring on the axle end
- The outer goes between the mount and the bump stop on the frame
- Space down your bump stops to prevent shock bottom outs at full compression
- Keep your tires out of your fenders if they’re oversized by spacing down the bump stops
- General bump stop extension guidelines (will vary based on brand of shocks and bump stops used)
  
  Dobinsons 0-3″ lift shocks: Extensions are not necessary, unless running oversized tires
  
  Dobinsons 4-5″ lift shocks: Front needs about .5″ of bump stop extension, rear needs 2” of bump extension
  
  Dobinsons 6″ lift shocks: Front needs about 1.5” bump stop extension, rear needs a 3” extension or 2″ extension with extended length bump stops
- We offer replacement bump stops as well Here
Rated 5.00 out of 5
(2 reviews)
$150.00 Add to cart