DOBINSONS WA59-522K ADJUSTABLE REAR UPPER TRAILING ARMS | 4RUNNER FJ CRUISER GX470 GX460
WA59-522K Dobinsons Adjustable Rear Upper Trailing Arms Pair Toyota 4Runner FJ Cruiser Lexus GX470 GX460
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460 vs stock

Dobinsons Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460

(12 customer reviews)
  • Suits Toyota 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460, Prado 120 and 150
  • Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
  • Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
  • Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
  • Zinc plated, then powder coated black, for the ultimate finish and protection
  • Instructions written down below in the description
  • Link to matching lower arms

$375.00

In stock

In stock

Share (0)
Total: 0 Total: 0
SKU: WA59-522K Categories: , , , , , , , , , , , , , , , , , Tag: Brand:

Description

Dobinsons WA59-522K are adjustable rear upper trailing arms, to be used on any vehicle lifted or not, up to 4″ of lift. This Dobinsons WA59-522K kit comes with both Rear Upper Trailing Arms and has the pre-installed rubber bushings. The rubber bushings allow for more flex of the rear axle, and will also be noise and maintenance free.  These adjustable arms will allow you to properly set your rear pinion angle due to adding a lift, while also adding strength over the stock arms. Suitable also for long travel rear suspension setups.
Instructions for Dobinsons WA59-522K use (updated 2021 version): Both ends are threaded, this is now adjusted like a tie rod on a vehicle.  The offset end goes on the frame, with the main long arm facing upwards (like the letter P, the flatter side goes up, and the bushing goes down), gaining fuel tank clearance on the driver’s side.  Set initial length to the same as factory arms, and install them loosely, then rotate center piece like a tie rod in increments until your pinion angle is set properly.  Adding too much length could lead to driveline vibrations.
Suits all these vehicles:
4th Gen 4Runner 2003-2009
5th Gen 4Runner 2010-2024
Lexus GX470 (all years)
Lexus GX460 (all years)
Toyota FJ Cruiser (all years)
Prado 120
Prado 150
For more information and reviews of Toyota 4Runner suspensions using Dobinsons WA59-522K, click here: https://www.toyota-4runner.org/5th-gen-t4rs/231576-dobinsons-5th-gen-t4r-suspension-options-lots-choices.html
WA59-522K rear upper trailing arms vs stock
Link to matching rear lower trailing arms:

Dobinsons Spring & Suspension™ established in 1953, is largely based on Leaf and Coil Spring Manufacturing and the supply of Suspension Components. With several generations of family ownership and experiences, Dobinsons has become one of the leaders in the Spring Industry in Australia applying the years of knowledge into their products. The success of the business has come about by providing quality products, acquiring and using technical knowledge and having the equipment to perform and provide professional service.
Dobinsons Spring & Suspension™ pride themselves on having the world’s largest range of 4×4 spring and suspension componentry. This extensive range can be viewed using their online catalogues or selecting online.

Their quality of design and manufacture is what sets Dobinsons apart from their competitors, if not the price. The company manufactures and repairs a large range of springs and sells a comprehensive range of suspension components.

They have over 13,000 spring specifications on hand and computerized spring design programs providing them with professional and accurate results. For the past 25 years,

Dobinsons Spring & Suspension™ have been exporting their products to different parts of the world and their name has become synonymous with quality in these countries. The factory covers over 4000m², consisting of a leaf spring production line, a coil spring production line and two large stock holding warehouses. There are thousands of parts kept in stock, including Coil Springs, Leaf Springs, Torsion Bars, Shock Absorbers, Greasable Shackle Kits and Pins, U-Bolts, Polyurethane Bushes, Centre Bolts, Castor Wedges & 4×4 Accessories. It also includes a fully equipped service department dedicated to removing and replacing all types of suspension componentry on passenger vehicles, 4×4 vehicles and trucks.

Vehicle Fitment:

2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner
2010 Toyota 4Runner
2011 Toyota 4Runner
2012 Toyota 4Runner
2013 Toyota 4Runner
2014 Toyota 4Runner
2015 Toyota 4Runner
2016 Toyota 4Runner
2017 Toyota 4Runner
2018 Toyota 4Runner
2019 Toyota 4Runner
2020 Toyota 4Runner
2021 Toyota 4Runner
2022 Toyota 4Runner
2023 Toyota 4Runner
2024 Toyota 4Runner

2003 Lexus GX470
2004 Lexus GX470
2005 Lexus GX470
2006 Lexus GX470
2007 Lexus GX470
2008 Lexus GX470
2009 Lexus GX470

2010 Lexus GX460
2011 Lexus GX460
2012 Lexus GX460
2013 Lexus GX460
2014 Lexus GX460
2015 Lexus GX460
2016 Lexus GX460
2017 Lexus GX460
2018 Lexus GX460
2019 Lexus GX460
2020 Lexus GX460
2021 Lexus GX460
2022 Lexus GX460
2023 Lexus GX460

2006 Toyota FJ Cruiser
2007 Toyota FJ Cruiser
2008 Toyota FJ Cruiser
2009 Toyota FJ Cruiser
2010 Toyota FJ Cruiser
2011 Toyota FJ Cruiser
2012 Toyota FJ Cruiser
2013 Toyota FJ Cruiser
2014 Toyota FJ Cruiser
2015 Toyota FJ Cruiser
2016 Toyota FJ Cruiser

2003 Toyota Land Cruiser Prado 120 125
2004 Toyota Land Cruiser Prado 120 125
2005 Toyota Land Cruiser Prado 120 125
2006 Toyota Land Cruiser Prado 120 125
2007 Toyota Land Cruiser Prado 120 125
2008 Toyota Land Cruiser Prado 120 125
2009 Toyota Land Cruiser Prado 120 125

2010 Toyota Land Cruiser Prado 150
2011 Toyota Land Cruiser Prado 150
2012 Toyota Land Cruiser Prado 150
2013 Toyota Land Cruiser Prado 150
2014 Toyota Land Cruiser Prado 150
2015 Toyota Land Cruiser Prado 150
2016 Toyota Land Cruiser Prado 150
2017 Toyota Land Cruiser Prado 150
2018 Toyota Land Cruiser Prado 150
2019 Toyota Land Cruiser Prado 150
2020 Toyota Land Cruiser Prado 150
2021 Toyota Land Cruiser Prado 150
2022 Toyota Land Cruiser Prado 150
2023 Toyota Land Cruiser Prado 150

Dobinsons Adjustable Rear Lower Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460

12 reviews for Dobinsons Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460

  1. Christopher (verified owner) –

    Spoke with Mike, he got me headed in the right direction for what I need.

  2. Bradley (verified owner) –

    I received it really fast.

  3. Sean (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  4. Jesse (verified owner) –

    Good quality, really nice.

  5. Jason (verified owner) –

    This is my go-to now for off road parts.

  6. Joshua (verified owner) –

    *****

  7. Patrick (verified owner) –

    Just what I needed.

  8. Thomas (verified owner) –

    Very fast delivery.

  9. Bradley (verified owner) –

    Very good customer service, super friendly.

  10. Andrew (verified owner) –

    It’s exactly what I wanted.

  11. Nathan (verified owner) –

    Very fast delivery.

  12. Jose (verified owner) –

    Would definitely buy from this site again.

Add a review

You may also like…

  • Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
    • Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
    • Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
    • Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
    4Runner 4th Gen (2003-2009)

    Dobinsons Adjustable Rear Lower Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
    • Suits Toyota 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), and Lexus GX470, GX460, Prado 120 and 150
    • Adjustable Design: Enables fine-tuning of the rear axle’s pinion angle, crucial for vehicles with suspension lifts.​
    • Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
    • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
    • Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
    • Zinc plated, then powder coated black, for the ultimate finish and protection
    • Easy Installation: Designed as a direct replacement for factory arms, facilitating straightforward installation without the need for additional modifications
    • Link to matching upper arms
    (14 reviews)
    $450.00 Add to cart

Related products

  • Dobinsons Big Bore Land Cruiser Steering Damper 60 70 80 series SD59-824
    • Dobinsons Big Bore Land Cruiser Steering Damper 60 70 80 series SD59-824
    • Dobinsons steering dampers display image
    • Dobinsons Big Bore Land Cruiser Steering Damper 60 70 80 series SD59-824
    80 Series Land Cruiser (1990-1997)

    Dobinsons Big Bore Land Cruiser Steering Damper for 60 70 80 series 1980-1997
    • Suits Land Cruisers, Series 60, 61, 62, 70, 71, 73, 74, 75, 77, 78 and 80 series and Lexus LX450 from 1980-1997
    • A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
    • If you don’t know how old your current steering damper is, then it’s time to replace it
    • Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
    • Cellular Foam Cell Insert
    • Teflon Piston Rings
    • Excellent Viscosity Temperature Performance
    • NOK Triple Lip Oil Seals
    • High Quality Fuchs German Oil
    • Replaces OE steering damper, bolts into place
    • 650mm extended, 420mm compressed
    (7 reviews)
    $135.00 Add to cart
  • Quick ride yellow and teal
    • Quick ride yellow and teal
    • Quick ride yellow and red
    • Quick ride yellow and black
    Tacoma 3rd Gen (2016-2023)
    THIS SHIPS FREE
    within 48 US States

    Dobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
    • 4×4 Access Cab models come with 1″ front lift from the factory.  Lift heights listed are for Dual cab 4×4 models.  Subtract 1″ for access cab models
    • All lift heights are based on the baseline of 20″ front and 22″ rear, measured from the center of the hub up to the fender edge.  A 3″ front lift is 23″ for example.  Some Tacoma’s come with 1″ lift from the factory
    • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
    • Coils are specifically suited to the additional accessory load (weight) on the vehicle
    • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
    • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
    • Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
    • You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
    • For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
    • Select desired lift height and additional options
    (13 reviews)
    From $960.00 Select options
  • UCA59-003K Dobinsons Tubular UCA Pair Toyota Tacoma Hilux Fortuner 2005-23 (1)
    On Backorder
    • UCA59-003K Dobinsons Tubular UCA Pair Toyota Tacoma Hilux Fortuner 2005-23 (1)
    • UCA59-003K Dobinsons Tubular UCA Pair Toyota Tacoma Hilux Fortuner 2005-23 (1)
    • Dobinsons MRA59-A220 UCA59-003K installed in Tacoma credit p8trit Dobinsons MRR
    Suspension
    THIS SHIPS FREE
    within 48 US States

    Dobinsons Tubular UCA Pair | Toyota Tacoma Hilux Fortuner 2005-23
    • Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
    • Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
    • Has 3 degrees of caster built in, no adjustability or settings required
    • Has more clearance around the ball joint than factory UCA’s for better tire clearance
    • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
    • Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
    • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
    • Product Video
    • Replacement Ball Joints can be ordered Here
    (9 reviews)
    $875.00 Add to cart
  • Dobinsons square top ubolts u-bolts 2 pairs
    Tundra 2nd Gen (2007-2021)

    Dobinsons UB59-437K Rear U-Bolt Kit (2 Pairs)
    • These suit 2007-2021 Toyota Tundra, 2005-2023 Toyota Tacoma with thick/heavy leaf packs (like L59-112-R) and 2019-2023 Ford Ranger USA Spec with thick/heavy leaf packs (like L19-133-R), also fit other International trucks and SUV’s
    • Made from the highest quality raw materials to give years of life under the harshest conditions
    • Over 60 years of leaf spring design and manufacturing
    • Includes 4 U-bolts, enough for 1 vehicle
    • Requires 2″ lift leaf springs to ensure proper fitment
    • These are a 30mm longer version of UB59-453-2K Ubolts
    • These are 210mm / 8.25″ in length, 62mm inner width, 14mm bolt diameter
    • Photo for illustration purposes.  These are square at the top
    (7 reviews)
    $100.00 Add to cart