Your cart is currently empty!
UCAs and Control Arms - 5th Gen 4Runner
Showing all 20 results
-
4Runner 4th Gen (2003-2009)Ships FREE !!
within 48 US StatesETA is Summer 2024Dobinsons Tubular UCA Kit | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
$795.00 Add to cart -
SPCShips FREE !!
within 48 US StatesSPC 25480 | UCA’s for 4Runner FJ Cruiser GX470 GX460
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +2° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- New maintenance-free sealed ball joint design
- Installation Instructions
$695.95 Add to cart -
4Runner 4th Gen (2003-2009)
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
$345.00 Add to cart -
4Runner 4th Gen (2003-2009)
Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
$405.00 Add to cart -
Upper Control ArmsShips FREE !!
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s | 4Runner FJ Cruiser GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
$1,195.00 Add to cart -
4Runner 5th Gen (2010-2024)
Dirt King Tubular Ball Joint UCA’s – FJ Cruiser 4Runner GX470 GX460
- Suits 4th and 5th Gen Toyota 4Runner from 2003 to 2024 2WD and 4WD, Toyota FJ Cruiser all years, Lexus GX470 and GX460 all years
- Proudly made in the USA
- CAD designed, Formed steel bushing gussets
- Constructed with 4130 chromoly tubing
- Preassembled with heavy duty Moog ball joints for fast installation
- Grease fitting ports for easy servicing, Zinc plated components for corrosion resistance
- Professionally MIG welded, powder coated black
$599.00 Select options -
Dirt King Fabrication
Dirt King Toyota UCA Ball Joint Caps
These ball joint caps seal the Dirt King ball joint cups from the elements. The caps are machined from 6061 aluminum, have an anodized finish, and utilize o-rings for a snug press fit. Price includes two caps with your choice of red or black.
Compatibility :
2005-2023 Tacoma Ball Joint UCAs
2003-2024 4Runner Ball Joint UCAs
2007-2016 FJ Cruiser Ball Joint UCAs
2007-2021 Tundra Ball Joint UCAs- Can only be used if you’ve purchased Dirt King ball joint UCA’s!!
$59.00 Select options -
4Runner 4th Gen (2003-2009)ETA is Summer 2024
Dobinsons Tubular UCA Kit | 4Runner FJ GX470 GX460 – No Ball Joints
- Set of upper control arms for both left and right hand side, includes OE style rubber frame bushings and washers
- Uses OE replacement ball joints – not included in this page
- NOTE: This set DOES NOT INCLUDE ANY BALL JOINTS – you can buy your own OEM replacements and install them
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right arms, ball joint caps, and hardware to mount ABS lines
- Also available with ball joints installed, here
$575.00 Add to cart -
Upper Control Arms
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
-
- 2003-2009 Toyota 4Runner
- 2010-2024 Toyota 4Runner
- 2005-2015 Toyota Tacoma
- 2016-2023 Toyota Tacoma
- 2006+ FJ Cruiser (all years)
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
- Toyota Hilux Vigo
- Toyota Hilux Revo
- Toyota Fortuner
- Toyota Prado 120
- Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
$69.00 Add to cart -
4Runner 5th Gen (2010-2024)Ships FREE !!
within 48 US StatesDirt King Boxed UCA’s with Uniballs – FJ Cruiser 4Runner GX470 GX460
- Proudly made in the USA
- CAD designed, Boxed plate construction, Professionally MIG welded
- 4130 chromoly uniball cups, 1” FK uniballs, 17-4 stainless steel misalignment spacers
- Military grade F911 hardware, Brushed stainless steel logo plates
- Preassembled for fast installation
- Grease fitting ports for easy servicing of bushings
- Zinc plated components for corrosion resistance
$849.00 Add to cart -
4Runner 5th Gen (2010-2024)Ships FREE !!
within 48 US StatesDirt King Performance Lower Control Arms – 5th Gen T4R Late FJC GX460 non-KDSS
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
$1,849.00 Add to cart - CAD designed
-
Excluded
OME Upper Control Arms – 2003+ 4Runner FJ GX470 GX460
- Suits Toyota 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460
- Forged Ball Joint Housing
- Forged Eyelets
- Heavy Duty greasable Ball Joints
- OME Ball joint protective cap
- GIIRO bushings, free pivoting, grease free and maintenance free
- Increased camber and caster for 2in lift
- Mount provision for OE ABS wires
- ARB’s Intergrit powder coat finish
- Boxed in pairs with foam inserts
- Fitting instructions included
- OME Branded outer sleeve
- Tested and passed to meet VSB14 requirements
- 3 Year Manufacturers Warranty
- Made in Vietnam
$606.00 Add to cart -
4Runner 5th Gen (2010-2024)Ships FREE !!
within 48 US StatesDirt King Heim UCA’s with Uniballs – FJ Cruiser 4Runner GX470 GX460
- CAD designed
- Boxed plate construction
- Utilizes American made FK bearings
- 4130 Chromoly uniball cups
- Brushed stainless steel logo plates
- Preassembled for fast installation
- Zinc plated components for corrosion resistance
- Professionally MIG welded
- Proudly made in the USA
$999.00 Add to cart - CAD designed