You may be interested in…
-
Bump Stops + Spacers
Dobinsons Rear Upper Coil Isolators | 4Runner FJ Cruiser GX470 GX460
- Pair of aftermarket upper rubber coil isolators for Toyota and Lexus SUV’s
- These sit on top of the rear coil springs to properly isolate them from the frame, and also add the internal bump stop that these vehicles are intended to have
- If you have had an airbag conversion done incorrectly, or if you had to modify your isolators to add air bags and now need to go back, these are what you need
- Sits on top of rear coils
- Aftermarket version of the OEM Toyota Part Number 48302-35050
- OE quality upper rubber coil isolators with built-in bump stops
- Sold as a pair, 1 per vehicle needed
- Suits:
- 2003-2024 Toyota 4Runner
- 2007-2019 Toyota FJ Cruiser
- 2002-2009 Lexus GX 470
- 2010-2023 Lexus GX 460
(8 reviews) -
Upper Control Arms
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
-
- 2003-2009 Toyota 4Runner
- 2010-2024 Toyota 4Runner
- 2005-2015 Toyota Tacoma
- 2016-2023 Toyota Tacoma
- 2006+ FJ Cruiser (all years)
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
- Toyota Hilux Vigo
- Toyota Hilux Revo
- Toyota Fortuner
- Toyota Prado 120
- Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
(4 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s Pair | Toyota 4Runner FJ Cruiser Lexus GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered here
(8 reviews) -
Suspension
Dobinsons C59-302 Front Lifted Coil Springs for 4×4 Trucks and SUV’s – Pair
- See Vehicle Fitment list down below
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 395mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
- THE best selling coils that Dobinsons sell for any vehicle in the USA
- This is a comparable option to OME 2885 coils, which are 395mm free height, 16mm wire, 590LBF/in spring rate. Many Old Man Emu coils and struts are being discontinued.
(22 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
Shocks + Coilovers - Bronco 2021+FREE SHIPPING
within 48 US StatesDobinsons IMS Monotube 2.2″ IFP Front Struts Pair | Ford Bronco 2021+
- IMS front struts for Ford Bronco 2021-2025 Models (will not fit Bronco Sport)
- SOLD IN PAIRS
- Note: Photo is not of actual IMS struts. Ford Bronco IMS have a crossbar style lower front shock bush
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 243mm (9.55″). See instructions on setting coil seat height on left
- Reuse OE strut top mount
(8 reviews) -
Performance Upgrade - 5th Gen 4RunnerFREE SHIPPING
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | 4Runner 2010-2024 Rear
- Suits Toyota 4Runner 5th Gen 2010-2024 Rear
- Also available for the FRONT
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(11 reviews) -
80 Series Land Cruiser (1990-1997)Price Increase Coming June 2nd
OME Land Cruiser Steering Damper for 60 70 80 series 1980-1997
- Suits Land Cruisers, Series 60, 61, 62, 70, 71, 73, 74, 75, and 80 series from 1980-1997 and Lexus LX450
- A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
- If you don’t know how old your current steering damper is, then it’s time to replace it
- Nine Stage Coil Spring Valving For Optimum Performance
- A 15mm Piston Rod Provides Improved Strength
- Stone Guard Protects Piston Rod Against Stone Damage
- A 35mm Piston And Bore Allows Increased Oil Volume
- Twin Tube Design Protects Internal Components Against Stone Damage
- Multi-Lip Seal Prevents Oil Loss
- Original Stabilizer Mounts May Be Used Where Appropriate
(18 reviews)
Cart totals
Subtotal | $4,572.31 |
---|---|
Shipping |
Shipping to FL. |
Route Shipping Protection | $114.31 |
Tax | $349.69 |
Total | $5,126.31 |