Your cart is currently empty!
Dobinsons Adjustable Rear Sway Bar Link Pair | SE59-591
- Suits the rear of Toyota Tundra 2022-2025+, Toyota Sequoia 2023-2025+, Toyota Tacoma 2024-2025+, Toyota Land Cruiser 300 Series 2022-2025+, Lexus GX550, Toyota Land Cruiser 250 Series 2024-2025+
- Order 1 for 1 vehicle (sold as a pair)
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Adjustable length to suit lift heights of 1″ to 4″
- Watch a video here to see more about how this style of link adjusts: https://youtu.be/lZACSaE2PHI
- Photo is of the product installed on a 2022 Tundra
$200.00
In StockDescription
Tundra Swaybar Links
Sequoia Swaybar Links
Tacoma Swaybar Links
Lexus GX550 Swaybar Links
Tundra swaybar links (Dobinsons SE59-591) – These are adjustable sway bar extensions to suit 2″ to 4″ of lift, allowing your sway bar to work properly and reset back to it’s factory riding angle on the road. Adjust the rod length according to your lift height, and so that the sway bar is riding as close to a factory position as possible. The base setting should be to add half of your lifted height to the stock length. Take new links, make them the same length as stock, then add exactly half of the lifted lift height amount to them, and check for clearances. If they’re set too long, they will contact the trailing arm. Gold zinc plated, high quality OE style ball end joints, sealed for long life, this kit includes all that you will need.
Suits these vehicles:
Toyota Tundra 2022+
Toyota Sequoia 2023+
Toyota Land Cruiser 300 Series 2022+
Toyota Tacoma 2024+ rear
Lexus GX550
Toyota Land Cruiser 250 2024+
Many people don’t realize that when lifting their vehicle, the sway bar angle because a lot steeper than normal, and this actually affects the wheel travel and ride comfort inside the vehicle. The sway bar links are literally stretched out and causing a type of binding on the rear sway bar not being able to do its job properly. By changing out the original swaybar links to the Tundra swaybar links by Dobinsons, you can set the angle back to a more neutral position, gaining wheel travel, gaining ride comfort, and also helping the swaybar to properly assist the vehicle in keeping it more level when cornering. These Tundra swaybar links should be used at any lift height of over 1.5″ so that you get the proper articulation from your new suspension kit, and are required with a lift height of 2.0″ or more. You’ll also notice that if you don’t have longer sway bar links installed, reinstalling the original links can be quite difficult as they’re very tight on a lifted Toyota Tundra, Sequoia or 300 Series Land Cruiser.
To see a video of how this product adjusts, click here: https://youtu.be/lZACSaE2PHI
Vehicle Suitability:
2022 Toyota Tundra Rear Sway Bar Links
2023 Toyota Tundra Rear Sway Bar Links
2024 Toyota Tundra Rear Sway Bar Links
2025 Toyota Tundra Rear Sway Bar Links
2023 Toyota Sequoia Rear Sway Bar Links
2024 Toyota Sequoia Rear Sway Bar Links
2025 Toyota Sequoia Rear Sway Bar Links
2022 Toyota Land Cruiser 300 Series Rear Sway Bar Links
2023 Toyota Land Cruiser 300 Series Rear Sway Bar Links
2024 Toyota Land Cruiser 300 Series Rear Sway Bar Links
2025 Toyota Land Cruiser 300 Series Rear Sway Bar Links
2024 Toyota Tacoma Rear Sway Bar Links
2025 Toyota Tacoma Rear Sway Bar Links
2024 Lexus GX550 Rear Sway Bar Links
2025 Lexus GX550 Rear Sway Bar Links
2024 Toyota Land Cruiser 250
2025 Toyota Land Cruiser 250
15 reviews for Dobinsons Adjustable Rear Sway Bar Link Pair | SE59-591
You must be logged in to post a review.
You may also like…
-
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesDobinsons Adjustable Rear Lower Control Arms Pair for Tundra + Tacoma
- Suits all 2022-2025+ Toyota Tundra and 2024-2025+ Toyota Tacoma
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
(4 reviews) -
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesDobinsons Adjustable Rear Upper Trailing Arms Pair | WA59-571K
- Suits Toyota Tundra 2022-2025+, Sequoia 2023-2025+, Land Cruiser 250 Series 2024-2025+, and Tacoma 2024-2025+ and Lexus GX550 2024+
- Fully adjustable to properly set the length and pinion angle
-
On car adjustable with a left hand threaded side (Silver Nut) and a right hand threaded side (Gold Nut)
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- **Not suitable for vehicles with rear height sensors (attached to OEM arms)
- Trailing arms DO NOT have headlight adjustment bracket
- Instructions written down below in the description
(4 reviews)
Related products
-
Dobinsons
Dobinsons C59-300 Front Lifted Coil Springs for 4×4 Trucks and SUV’s – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 385mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
- This is a comparable option to OME 2884 coils, which are 390mm free height, 16mm wire, 590LBF/in spring rate
(15 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Rear Coils Options for Land Cruiser 80 Series 1990-1997 0-6″ Lift – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Choose what coil suits your vehicle and needs the best
- Any part number with a V in it means it’s a variable rate/progressive rate spring
- C59-221V – Stock height, variable rate
- c59-269V – 1.75″ Comfort ride spring with only stock weight (variable rate)
- C59-223V – 1.75″ lift with up to 220lbs weight (variable rate), 2.5″ with stock weight
- c59-169 – 1.75″ with up to 220lbs weight
- c59-171 – 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
- C59-175V – 2.0″ lift with up to 660LBS, or 3.0″ lift with up to 330LBS
- C97-147VT – 2.5″ lift with 440lbs weight (lifts more with less weight), (variable dual rate long travel)
- c59-167 – 2.5″ with up to 220lbs weight, 2″ with 440lbs weight
- c59-185 – 3″ lift with up to 220LBS weight, 2.5″ with 500LBS, 2″ with 800LBS
- C59-153 – 3″ lift with 880LBS constant rear load
- C59-613V – 3″ lift with up to 200 LBS (Flexi coils, variable rate)
- C97-145VT – 3.5″ lift with 400LBS+ heavy load rear (variable dual rate long travel)
- C59-615V – 4″ lift with up to 200 LBS (Flexi coils, variable rate)
- C59-617V 4″ Lift with 200-400LBS Load (Flexi coils, variable rate)
- C59-309 – 4″ lift with 110-220lbs weight
- C97-485VT – 4.0″ with a heavy load rear end of 300-400LBS of added weight (variable dual rate long travel)
- C59-313 – 4″ lift with 400-750lbs weight
- C59-317 – 6″ lift with stock weight
- C59-319 – 6″ lift with 200LBS constant weight
- C59-311 – 6″ lift with 880LBS constant weight
- Sold in Pairs
- Click HERE to see the FRONT coil options
- Lift heights may vary depending on the age of the vehicle, and all accessories and weight added to it
(6 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesETA is end of JulyDobinsons GS59-221 Pair Front Struts | FJ to 09 Tacoma 05-23 4Runner 03-09 GX470
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-221 specifications: 540mm extended, 420mm compressed, 50mm body size
- Offered in Yellow or Black
(9 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/510mm free height, 16mm wire, 179LBF/in rate
- Sold in Pairs
(3 reviews)
Timothy (verified owner) –
Very fast delivery.
Kenneth (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Jose (verified owner) –
Great description on the page, easy to understand what I was buying.
Kenneth (verified owner) –
Would definitely buy from this site again.
Michael (verified owner) –
Value for money, super satisfied.
Robert (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Kevin (verified owner) –
Good quality, really nice.
Andrew (verified owner) –
Value for money, super satisfied.
Justin (verified owner) –
5 Stars!!
Michael (verified owner) –
This is my go-to now for off road parts.
Justin (verified owner) –
Value for money, super satisfied.
Aaron (verified owner) –
It’s exactly what I wanted.
Bradley (verified owner) –
Value for money, super satisfied.
Timothy (verified owner) –
Just what I needed.
Bryan (verified owner) –
Good quality, really nice.