Your cart is currently empty!
Sale!
Dobinsons Front Adjustable Panhard Rod | Land Cruiser 80 Series LHD
- Suits Land Cruiser 80 Series and Lexus LX450
- Replaces OE Front Panhard Rod, adjustable to suit lift height
- Zinc plated steel then E-coated with all hardware and high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 3″ to 6″ of lift
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
- For left hand drive models
Original price was: $345.00.$293.25Current price is: $293.25.
In Stock
EAN: 9332670053545
SKU: PR59-1408
Categories: 80 Series Land Cruiser (1990-1997), Control Arms - 80 Series, Dobinsons, Panhard Rods + Track Bars, Suspension
Tag: pr59-1408
Brand: Dobinsons Spring & Suspension
Description
80 Series Front Panhard Rod by Dobinsons Spring & Suspension, Front Heavy Duty Adjustable Panhard rod for Toyota Land Cruiser 80 Series from 1990-1997, suitable for vehicles lifted 3″ to 6″, realigning the front axle to be centered. This 80 Series Front Panhard Rod will set the alignment properly and make sure the vehicle is tracking correctly. Comes complete with high quality rubber bushes for maximum articulation.
For suspension lift kits between 75mm/3″ and 90mm/3.5″ castor correction is required, and also adjustable panhard rods are highly recommended. For customers wanting to maximize the off-road performance extended sway bar links and extended brake lines are also recommended. Extending the vehicles bump stops and driveshaft modification may also be required depending on the application.
For suspension lift kits exceeding 90mm/3.5″ considerable alignment parts are required. Castor correction, adjustable panhard rods, sway bar extensions, extended bump stops, extended brake lines, gearbox spacing, driveshaft modification, adjustable/modified rear trailing arms and adjustable steering arm modifications are required along with other driveline, suspension and steering modifications which may also be required.
Note: For Off Road Use Only. Photos for illustration purposes and to show product detail. May not be photo of actual part number on this page.
To see all Dobinsons products that Exit Offroad offer for the 80 Series, please click here:Â https://exitoffroad.com/product-category/toyota/land-cruiser/80-series-land-cruiser/
Vehicle Fitment:
1990 Toyota Land Cruiser 80 Series
1991 Toyota Land Cruiser 80 Series
1992 Toyota Land Cruiser 80 Series
1993 Toyota Land Cruiser 80 Series
1994 Toyota Land Cruiser 80 Series
1995 Toyota Land Cruiser 80 Series
1996 Toyota Land Cruiser 80 Series
1997 Toyota Land Cruiser 80 Series
1995 Lexus LX450
1996 Lexus LX450
1997 Lexus LX450
8 reviews for Dobinsons Front Adjustable Panhard Rod | Land Cruiser 80 Series LHD
You must be logged in to post a review.
You may also like…
-
Sale!80 Series Land Cruiser (1990-1997)
Dobinsons Rear Adjustable Panhard Rod Track Bar | Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel then E-coated with all hardware and high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 3″ to 6″ of lift
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(7 reviews) -
Sale!80 Series Land Cruiser (1990-1997)
Dobinsons Rear Sway Bar Extensions | Land Cruiser 70 80 Series Bottom Chassis Mount
- Suits Toyota Land Cruiser 78, 79, 80 Series and Lexus LX450
- For 2″ to 5″ lift heights
- Zinc plated steel with all hardware supplied
- Simple bolt-on design
- Sold as a pair, enough for 1 vehicle
- Bolts to the bottom of the frame, not the side like some earlier models
- Check your mounting position before ordering!!
(3 reviews) -
Sale!80 Series Land Cruiser (1990-1997)
Dobinsons Rear Sway Bar Extension Kit | Toyota Land Cruiser 70 80 Series Side Chassis Mount
- Suits Toyota Land Cruiser 78, 79, 80 Series and Lexus LX450
- For 2″ to 5″ lift heights
- Zinc plated steel with all hardware supplied
- Simple bolt-on design
- Sold as a pair, enough for 1 vehicle
- For side-frame mounted brackets only
- Verify your rear sway bar is attached to the side of the frame before ordering (the other option is under the frame)
(6 reviews)
Related products
-
Sale!Dobinsons
Dobinsons C59-325 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 420mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
(14 reviews) -
Sale!Dobinsons
Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
- Suits Toyota Tacoma 2005-2023
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs, top and bottom of the shackle and the fixed end
- Greasable bolts are sold in pairs, sold separately
- OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
- Tacoma poly bushing kit installation
- Link to Greasable Bolts, Click here
(14 reviews) -
Sale!Dobinsons
Dobinsons C59-300 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 385mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
(15 reviews) -
Suspension
Dobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23
- Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
- Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered Here
(9 reviews)
Edward (verified owner) –
It’s exactly what I wanted.
Jacob (verified owner) –
This is my go-to now for off road parts.
Jonathan (verified owner) –
5 Stars!!
Jacob (verified owner) –
5 Stars!!
David (verified owner) –
Just what I needed.
Andrew (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Steven (verified owner) –
Very fast delivery.
Jeffrey (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.