Your cart is currently empty!
Dobinsons Front 1.0″ Lift Coils for Toyota 4Runner TRD PRO – Pair
- Provides 1.0″ lift over stock height by changing only the coils. No other mods required, except an alignment afterwards
- Suits Bilstein and Fox TRD Pro Struts ONLY with flat-ground coils top and bottom
- Will NOT work on 2021 models with a step in the lower coil seat
- Same spring rate as stock, just taller to give the lift
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – RED
- Sold in Pairs
$275.00
Out of stock
Email when stock is available
SKU: C59-748R
Categories: 4Runner 5th Gen (2010-2024), Coil Springs, Coil Springs - 5th Gen 4Runner, Dobinsons, Suspension
Tags: c59-748r, c59-758r, trd, trd pro
Brand: Dobinsons Spring & Suspension
Description
Dobinsons C59-748R coils and are designed for and will work on the Toyota 4Runner TRD Pro with Bilstein or FOX struts, and they will provide 1.0″ of lift over stock height. They come in the same spring rate as the factory coils do, but with increased height to provide the lift.
If you have broken TRD Pro front coils from your Bilstein TRD Pro suspension, these coils will fit the Bilstein TRD Pro struts that you have to solve the problem of the broken TRD Pro coils.
These will also fit on the 2019+ TRD Fox brand suspension, verified August 2020. Will NOT suit 2021 updated models with a step in the lower coil seat. Only suits coils that are flat-ground on the top and bottom.
Dobinsons Spring & Suspension™ proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from their state of the art manufacturing facility in Central Queensland, Australia.
Dobinsons™ proudly boast one of the worlds largest range of coil springs, including raised height and heavy duty 4WD springs, lowered performance passenger car springs, O.E. replacement springs and heavy duty springs for commercial vehicles.
All Dobinsons™ coil springs are load tested and scragged 100% to eliminate subsequent spring sag, and ensure they meet and maintain the required specifications. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.
Our design engineers utilize the latest coil spring design programs to ensure each Dobinsons C59-748R coil spring meets or exceeds the design requirements, to achieve maximum working life. These state-of-the-art design programs are crucial when designing variable/progressive rate springs, ensuring laden and unladen spring rates are correct, providing the best possible ride comfort and handling.
Vehicle Suitability:
2010 Toyota 4Runner TRD Pro Coil Springs
2011 Toyota 4Runner TRD Pro Coil Springs
2012 Toyota 4Runner TRD Pro Coil Springs
2013 Toyota 4Runner TRD Pro Coil Springs
2014 Toyota 4Runner TRD Pro Coil Springs
2015 Toyota 4Runner TRD Pro Coil Springs
2016 Toyota 4Runner TRD Pro Coil Springs
2017 Toyota 4Runner TRD Pro Coil Springs
2018 Toyota 4Runner TRD Pro Coil Springs
2019 Toyota 4Runner TRD Pro Coil Springs
2020 Toyota 4Runner TRD Pro Coil Springs
12 reviews for Dobinsons Front 1.0″ Lift Coils for Toyota 4Runner TRD PRO – Pair
You must be logged in to post a review.
Related products
-
Dobinsons
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
- 14mm pin/shank thickness, 103mm long not counting the head of the bolt, 116mm total length from head of bolt to end
(12 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/510mm free height, 16mm wire, 179LBF/in rate
- Sold in Pairs
(3 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
(14 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews)
Nathan (verified owner) –
Very good customer service, super friendly.
Nathan (verified owner) –
5 Stars!!
Anthony (verified owner) –
Would definitely buy from this site again.
Jesse (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Christopher (verified owner) –
Just what I needed.
Nathan (verified owner) –
Very good customer service, super friendly.
Jesse (verified owner) –
I received it really fast.
Shawn (verified owner) –
Very good customer service, super friendly.
Brian (verified owner) –
This is my go-to now for off road parts.
Travis (verified owner) –
I received it really fast.
John (verified owner) –
Good quality, really nice.
John (verified owner) –
It’s exactly what I wanted.